Unigine.Plugins.SpiderVision.ViewportData Class

Свойства:

Имя	Описание
int ID	The viewport ID.
string Name	The viewport name.
string ComputerName	The name of the computer, on which this viewport is to be rendered.
int DisplayIndex	The display index.
ivec2 WindowSize	The size of the window, if it is in the Window mode.
ivec2 WindowPosition	The window position on the screen.
ViewportData.WINDOW_MODE WindowMode	The window mode for the rendered viewport: fullscreen imitation (frameless window adapted to the full window area) or window.
bool ProjectionEnabled	The value indicating if the projection rendering in viewport is enabled.
vec3 Position	The viewport position relative to the viewpoint in the setup.
vec3 Rotation	The viewport rotation relative to its own center in the setup.
vec2 Offset	The offset of the FOV.
ViewportData.DISPLAY_TRANSFORM_TYPE Type	The type of the projection matrix distortion applied to the viewport: display or projector.
vec2 Size	The physical size of the display.
float Aspect	The aspect ratio for the projector.
float VFov	The vertical field of view for the projector.
int GroupID	The ID of the group of viewports.
static Event<ViewportData> EventBaseChanged	The event triggered on changing basic viewport parameters (width, height, position, rotation, etc.
static Event<ViewportData> EventWarpChanged	The event triggered on changing warping (geometry correction) settings.
static Event<ViewportData> EventEasyblendChanged	The event triggered on loading or unloading a multi-projector setup configuration .
static Event<ViewportData> EventBlendChanged	The event triggered on changing screen-space or edge blending settings (alpha, contrast, gamma, etc.
static Event<ViewportData> EventMaskChanged	The event triggered on changing (adding, removing, or modifying) masks.
static Event<ViewportData> EventColorChanged	The event triggered on changing brightness and color correction settings.
static Event<ViewportData> EventDebugChanged	The event triggered on changing auxiliary debug settings.
static Event<ViewportData> EventSomethingChanged	The event triggered on ANY changes in viewport configuration data (warping, blending, color correction, debug, etc.

Методы:

Имя	Описание View: Sort by:
Update	Updates the data displayed in the viewport.
GrabWindowParameters	Updates the viewport data according to the current window parameters: display index, window size and position.
IsGrouped	Returns the value specifying if the viewport is in the group.
LoadEasyBlendSettings	Loads the settings from the EasyBlend setup file.
RemoveEasyblendSetup	Removes the EasyBlend setup.
GetWarpGrid	Returns the warp grid data.
GetBlendZones	Returns the blend zones data.
GetMasks	Returns the masks data.
GetColorCorrection	Returns the color correction data.
GetDebug	Returns the debug data.
GetEasyblendData	Returns the EasyBlend data.
SaveXml	Saves the viewport data to the given instance of the Xml class.
RestoreXml	Loads the viewport data from the specified instance of the Xml class.
Save	Saves the viewport data to the specified stream.
Restore	Loads the viewport data from the specified stream.
Copy	Copies the current viewport data to the specified instance of the ViewportData class.

ViewportData Class

Перечисления (Enums)

WINDOW_MODE#

Имя	Описание
WINDOW = 0	Window mode.
FULLSCREEN_FREE = 1	Fullscreen imitation — frameless window adapted to the full window area.

POINT_SMOOTH_TYPE#

Имя	Описание
LINEAR = 0	Linear interpolation is applied for curving of the line on both sides of the point.
SMOOTH = 1	Symmetric control handles for smooth curves on both sides of the point.
BREAK = 2	Asymmetric control handles for an independent control of each handle.
AUTO = 3	Automatic smooth line curving, no control handles available.
NUM = 4	Total number of line curving modes.

DISPLAY_TRANSFORM_TYPE#

Имя	Описание
DISPLAY = 0	Display viewport.
PROJECTOR = 1	Projector (beamer) viewport.

Properties

int ID#

The viewport ID.

string Name#

The viewport name.

string ComputerName#

The name of the computer, on which this viewport is to be rendered.

int DisplayIndex#

The display index.

ivec2 WindowSize#

The size of the window, if it is in the Window mode.

ivec2 WindowPosition#

The window position on the screen.

ViewportData.WINDOW_MODE WindowMode#

The window mode for the rendered viewport: fullscreen imitation (frameless window adapted to the full window area) or window.

bool ProjectionEnabled#

The value indicating if the projection rendering in viewport is enabled.

vec3 Position#

The viewport position relative to the viewpoint in the setup.

vec3 Rotation#

The viewport rotation relative to its own center in the setup.

vec2 Offset#

The offset of the FOV.

ViewportData.DISPLAY_TRANSFORM_TYPE Type#

The type of the projection matrix distortion applied to the viewport: display or projector.

vec2 Size#

The physical size of the display.

float Aspect#

The aspect ratio for the projector.

float VFov#

The vertical field of view for the projector.

int GroupID#

The ID of the group of viewports.

Event<ViewportData> EventBaseChanged#

The event triggered on changing basic viewport parameters (width, height, position, rotation, etc.). You can subscribe to events via Connect() and unsubscribe via Disconnect(). You can also use EventConnection and EventConnections classes for convenience (see examples below).

Notice

For more details see the Event Handling article.

The event handler signature is as follows: myhandler(ViewportData viewport_data)

Usage Example

Source code (C#)

// implement the BaseChanged event handler
void basechanged_event_handler(ViewportData viewport_data)
{
	Log.Message("\Handling BaseChanged event\n");
}

//////////////////////////////////////////////////////////////////////////////
//  1. Multiple subscriptions can be linked to an EventConnections instance
//  class that you can use later to remove all these subscriptions at once
//////////////////////////////////////////////////////////////////////////////

// create an instance of the EventConnections class
EventConnections basechanged_event_connections = new EventConnections();


// link to this instance when subscribing to an event (subscription to various events can be linked)
ViewportData.EventBaseChanged.Connect(basechanged_event_connections, basechanged_event_handler);

// other subscriptions are also linked to this EventConnections instance 
// (e.g. you can subscribe using lambdas)
ViewportData.EventBaseChanged.Connect(basechanged_event_connections, (ViewportData viewport_data) => { 
		Log.Message("Handling BaseChanged event lambda\n");
		}
	);

// later all of these linked subscriptions can be removed with a single line
basechanged_event_connections.DisconnectAll();

//////////////////////////////////////////////////////////////////////////////
//  2. You can subscribe and unsubscribe via the handler function directly
//////////////////////////////////////////////////////////////////////////////

// subscribe to the BaseChanged event with a handler function
ViewportData.EventBaseChanged.Connect(basechanged_event_handler);


// remove subscription to the BaseChanged event later by the handler function
ViewportData.EventBaseChanged.Disconnect(basechanged_event_handler);


//////////////////////////////////////////////////////////////////////////////
//   3. Subscribe to an event and unsubscribe later via an EventConnection instance
//////////////////////////////////////////////////////////////////////////////

// define a connection to be used to unsubscribe later
EventConnection basechanged_event_connection;

// subscribe to the BaseChanged event with a lambda handler function and keeping the connection
basechanged_event_connection = ViewportData.EventBaseChanged.Connect((ViewportData viewport_data) => { 
		Log.Message("Handling BaseChanged event lambda\n");
	}
);

// ...

// you can temporarily disable a particular event connection 
basechanged_event_connection.Enabled = false;

// ... perform certain actions

// and enable it back when necessary
basechanged_event_connection.Enabled = true;

// ...

// remove the subscription later using the saved connection
basechanged_event_connection.Disconnect();

//////////////////////////////////////////////////////////////////////////////
//   4. Ignoring BaseChanged events when necessary
//////////////////////////////////////////////////////////////////////////////

// you can temporarily disable the event to perform certain actions without triggering it
ViewportData.EventBaseChanged.Enabled = false;

// ... actions to be performed

// and enable it back when necessary
ViewportData.EventBaseChanged.Enabled = true;

Event<ViewportData> EventWarpChanged#

The event triggered on changing warping (geometry correction) settings. You can subscribe to events via Connect() and unsubscribe via Disconnect(). You can also use EventConnection and EventConnections classes for convenience (see examples below).

Notice

For more details see the Event Handling article.

The event handler signature is as follows: myhandler(ViewportData viewport_data)

Usage Example

Source code (C#)

// implement the WarpChanged event handler
void warpchanged_event_handler(ViewportData viewport_data)
{
	Log.Message("\Handling WarpChanged event\n");
}

//////////////////////////////////////////////////////////////////////////////
//  1. Multiple subscriptions can be linked to an EventConnections instance
//  class that you can use later to remove all these subscriptions at once
//////////////////////////////////////////////////////////////////////////////

// create an instance of the EventConnections class
EventConnections warpchanged_event_connections = new EventConnections();


// link to this instance when subscribing to an event (subscription to various events can be linked)
ViewportData.EventWarpChanged.Connect(warpchanged_event_connections, warpchanged_event_handler);

// other subscriptions are also linked to this EventConnections instance 
// (e.g. you can subscribe using lambdas)
ViewportData.EventWarpChanged.Connect(warpchanged_event_connections, (ViewportData viewport_data) => { 
		Log.Message("Handling WarpChanged event lambda\n");
		}
	);

// later all of these linked subscriptions can be removed with a single line
warpchanged_event_connections.DisconnectAll();

//////////////////////////////////////////////////////////////////////////////
//  2. You can subscribe and unsubscribe via the handler function directly
//////////////////////////////////////////////////////////////////////////////

// subscribe to the WarpChanged event with a handler function
ViewportData.EventWarpChanged.Connect(warpchanged_event_handler);


// remove subscription to the WarpChanged event later by the handler function
ViewportData.EventWarpChanged.Disconnect(warpchanged_event_handler);


//////////////////////////////////////////////////////////////////////////////
//   3. Subscribe to an event and unsubscribe later via an EventConnection instance
//////////////////////////////////////////////////////////////////////////////

// define a connection to be used to unsubscribe later
EventConnection warpchanged_event_connection;

// subscribe to the WarpChanged event with a lambda handler function and keeping the connection
warpchanged_event_connection = ViewportData.EventWarpChanged.Connect((ViewportData viewport_data) => { 
		Log.Message("Handling WarpChanged event lambda\n");
	}
);

// ...

// you can temporarily disable a particular event connection 
warpchanged_event_connection.Enabled = false;

// ... perform certain actions

// and enable it back when necessary
warpchanged_event_connection.Enabled = true;

// ...

// remove the subscription later using the saved connection
warpchanged_event_connection.Disconnect();

//////////////////////////////////////////////////////////////////////////////
//   4. Ignoring WarpChanged events when necessary
//////////////////////////////////////////////////////////////////////////////

// you can temporarily disable the event to perform certain actions without triggering it
ViewportData.EventWarpChanged.Enabled = false;

// ... actions to be performed

// and enable it back when necessary
ViewportData.EventWarpChanged.Enabled = true;

Event<ViewportData> EventEasyblendChanged#

The event triggered on loading or unloading a multi-projector setup configuration .ol-file (created via Scalable Display Manager). You can subscribe to events via Connect() and unsubscribe via Disconnect(). You can also use EventConnection and EventConnections classes for convenience (see examples below).

Notice

For more details see the Event Handling article.

The event handler signature is as follows: myhandler(ViewportData viewport_data)

Usage Example

Source code (C#)

// implement the EasyblendChanged event handler
void easyblendchanged_event_handler(ViewportData viewport_data)
{
	Log.Message("\Handling EasyblendChanged event\n");
}

//////////////////////////////////////////////////////////////////////////////
//  1. Multiple subscriptions can be linked to an EventConnections instance
//  class that you can use later to remove all these subscriptions at once
//////////////////////////////////////////////////////////////////////////////

// create an instance of the EventConnections class
EventConnections easyblendchanged_event_connections = new EventConnections();


// link to this instance when subscribing to an event (subscription to various events can be linked)
ViewportData.EventEasyblendChanged.Connect(easyblendchanged_event_connections, easyblendchanged_event_handler);

// other subscriptions are also linked to this EventConnections instance 
// (e.g. you can subscribe using lambdas)
ViewportData.EventEasyblendChanged.Connect(easyblendchanged_event_connections, (ViewportData viewport_data) => { 
		Log.Message("Handling EasyblendChanged event lambda\n");
		}
	);

// later all of these linked subscriptions can be removed with a single line
easyblendchanged_event_connections.DisconnectAll();

//////////////////////////////////////////////////////////////////////////////
//  2. You can subscribe and unsubscribe via the handler function directly
//////////////////////////////////////////////////////////////////////////////

// subscribe to the EasyblendChanged event with a handler function
ViewportData.EventEasyblendChanged.Connect(easyblendchanged_event_handler);


// remove subscription to the EasyblendChanged event later by the handler function
ViewportData.EventEasyblendChanged.Disconnect(easyblendchanged_event_handler);


//////////////////////////////////////////////////////////////////////////////
//   3. Subscribe to an event and unsubscribe later via an EventConnection instance
//////////////////////////////////////////////////////////////////////////////

// define a connection to be used to unsubscribe later
EventConnection easyblendchanged_event_connection;

// subscribe to the EasyblendChanged event with a lambda handler function and keeping the connection
easyblendchanged_event_connection = ViewportData.EventEasyblendChanged.Connect((ViewportData viewport_data) => { 
		Log.Message("Handling EasyblendChanged event lambda\n");
	}
);

// ...

// you can temporarily disable a particular event connection 
easyblendchanged_event_connection.Enabled = false;

// ... perform certain actions

// and enable it back when necessary
easyblendchanged_event_connection.Enabled = true;

// ...

// remove the subscription later using the saved connection
easyblendchanged_event_connection.Disconnect();

//////////////////////////////////////////////////////////////////////////////
//   4. Ignoring EasyblendChanged events when necessary
//////////////////////////////////////////////////////////////////////////////

// you can temporarily disable the event to perform certain actions without triggering it
ViewportData.EventEasyblendChanged.Enabled = false;

// ... actions to be performed

// and enable it back when necessary
ViewportData.EventEasyblendChanged.Enabled = true;

Event<ViewportData> EventBlendChanged#

The event triggered on changing screen-space or edge blending settings (alpha, contrast, gamma, etc.). You can subscribe to events via Connect() and unsubscribe via Disconnect(). You can also use EventConnection and EventConnections classes for convenience (see examples below).

Notice

For more details see the Event Handling article.

The event handler signature is as follows: myhandler(ViewportData viewport_data)

Usage Example

Source code (C#)

// implement the BlendChanged event handler
void blendchanged_event_handler(ViewportData viewport_data)
{
	Log.Message("\Handling BlendChanged event\n");
}

//////////////////////////////////////////////////////////////////////////////
//  1. Multiple subscriptions can be linked to an EventConnections instance
//  class that you can use later to remove all these subscriptions at once
//////////////////////////////////////////////////////////////////////////////

// create an instance of the EventConnections class
EventConnections blendchanged_event_connections = new EventConnections();


// link to this instance when subscribing to an event (subscription to various events can be linked)
ViewportData.EventBlendChanged.Connect(blendchanged_event_connections, blendchanged_event_handler);

// other subscriptions are also linked to this EventConnections instance 
// (e.g. you can subscribe using lambdas)
ViewportData.EventBlendChanged.Connect(blendchanged_event_connections, (ViewportData viewport_data) => { 
		Log.Message("Handling BlendChanged event lambda\n");
		}
	);

// later all of these linked subscriptions can be removed with a single line
blendchanged_event_connections.DisconnectAll();

//////////////////////////////////////////////////////////////////////////////
//  2. You can subscribe and unsubscribe via the handler function directly
//////////////////////////////////////////////////////////////////////////////

// subscribe to the BlendChanged event with a handler function
ViewportData.EventBlendChanged.Connect(blendchanged_event_handler);


// remove subscription to the BlendChanged event later by the handler function
ViewportData.EventBlendChanged.Disconnect(blendchanged_event_handler);


//////////////////////////////////////////////////////////////////////////////
//   3. Subscribe to an event and unsubscribe later via an EventConnection instance
//////////////////////////////////////////////////////////////////////////////

// define a connection to be used to unsubscribe later
EventConnection blendchanged_event_connection;

// subscribe to the BlendChanged event with a lambda handler function and keeping the connection
blendchanged_event_connection = ViewportData.EventBlendChanged.Connect((ViewportData viewport_data) => { 
		Log.Message("Handling BlendChanged event lambda\n");
	}
);

// ...

// you can temporarily disable a particular event connection 
blendchanged_event_connection.Enabled = false;

// ... perform certain actions

// and enable it back when necessary
blendchanged_event_connection.Enabled = true;

// ...

// remove the subscription later using the saved connection
blendchanged_event_connection.Disconnect();

//////////////////////////////////////////////////////////////////////////////
//   4. Ignoring BlendChanged events when necessary
//////////////////////////////////////////////////////////////////////////////

// you can temporarily disable the event to perform certain actions without triggering it
ViewportData.EventBlendChanged.Enabled = false;

// ... actions to be performed

// and enable it back when necessary
ViewportData.EventBlendChanged.Enabled = true;

Event<ViewportData> EventMaskChanged#

The event triggered on changing (adding, removing, or modifying) masks. You can subscribe to events via Connect() and unsubscribe via Disconnect(). You can also use EventConnection and EventConnections classes for convenience (see examples below).

Notice

For more details see the Event Handling article.

The event handler signature is as follows: myhandler(ViewportData viewport_data)

Usage Example

Source code (C#)

// implement the MaskChanged event handler
void maskchanged_event_handler(ViewportData viewport_data)
{
	Log.Message("\Handling MaskChanged event\n");
}

//////////////////////////////////////////////////////////////////////////////
//  1. Multiple subscriptions can be linked to an EventConnections instance
//  class that you can use later to remove all these subscriptions at once
//////////////////////////////////////////////////////////////////////////////

// create an instance of the EventConnections class
EventConnections maskchanged_event_connections = new EventConnections();


// link to this instance when subscribing to an event (subscription to various events can be linked)
ViewportData.EventMaskChanged.Connect(maskchanged_event_connections, maskchanged_event_handler);

// other subscriptions are also linked to this EventConnections instance 
// (e.g. you can subscribe using lambdas)
ViewportData.EventMaskChanged.Connect(maskchanged_event_connections, (ViewportData viewport_data) => { 
		Log.Message("Handling MaskChanged event lambda\n");
		}
	);

// later all of these linked subscriptions can be removed with a single line
maskchanged_event_connections.DisconnectAll();

//////////////////////////////////////////////////////////////////////////////
//  2. You can subscribe and unsubscribe via the handler function directly
//////////////////////////////////////////////////////////////////////////////

// subscribe to the MaskChanged event with a handler function
ViewportData.EventMaskChanged.Connect(maskchanged_event_handler);


// remove subscription to the MaskChanged event later by the handler function
ViewportData.EventMaskChanged.Disconnect(maskchanged_event_handler);


//////////////////////////////////////////////////////////////////////////////
//   3. Subscribe to an event and unsubscribe later via an EventConnection instance
//////////////////////////////////////////////////////////////////////////////

// define a connection to be used to unsubscribe later
EventConnection maskchanged_event_connection;

// subscribe to the MaskChanged event with a lambda handler function and keeping the connection
maskchanged_event_connection = ViewportData.EventMaskChanged.Connect((ViewportData viewport_data) => { 
		Log.Message("Handling MaskChanged event lambda\n");
	}
);

// ...

// you can temporarily disable a particular event connection 
maskchanged_event_connection.Enabled = false;

// ... perform certain actions

// and enable it back when necessary
maskchanged_event_connection.Enabled = true;

// ...

// remove the subscription later using the saved connection
maskchanged_event_connection.Disconnect();

//////////////////////////////////////////////////////////////////////////////
//   4. Ignoring MaskChanged events when necessary
//////////////////////////////////////////////////////////////////////////////

// you can temporarily disable the event to perform certain actions without triggering it
ViewportData.EventMaskChanged.Enabled = false;

// ... actions to be performed

// and enable it back when necessary
ViewportData.EventMaskChanged.Enabled = true;

Event<ViewportData> EventColorChanged#

The event triggered on changing brightness and color correction settings. You can subscribe to events via Connect() and unsubscribe via Disconnect(). You can also use EventConnection and EventConnections classes for convenience (see examples below).

Notice

For more details see the Event Handling article.

The event handler signature is as follows: myhandler(ViewportData viewport_data)

Usage Example

Source code (C#)

// implement the ColorChanged event handler
void colorchanged_event_handler(ViewportData viewport_data)
{
	Log.Message("\Handling ColorChanged event\n");
}

//////////////////////////////////////////////////////////////////////////////
//  1. Multiple subscriptions can be linked to an EventConnections instance
//  class that you can use later to remove all these subscriptions at once
//////////////////////////////////////////////////////////////////////////////

// create an instance of the EventConnections class
EventConnections colorchanged_event_connections = new EventConnections();


// link to this instance when subscribing to an event (subscription to various events can be linked)
ViewportData.EventColorChanged.Connect(colorchanged_event_connections, colorchanged_event_handler);

// other subscriptions are also linked to this EventConnections instance 
// (e.g. you can subscribe using lambdas)
ViewportData.EventColorChanged.Connect(colorchanged_event_connections, (ViewportData viewport_data) => { 
		Log.Message("Handling ColorChanged event lambda\n");
		}
	);

// later all of these linked subscriptions can be removed with a single line
colorchanged_event_connections.DisconnectAll();

//////////////////////////////////////////////////////////////////////////////
//  2. You can subscribe and unsubscribe via the handler function directly
//////////////////////////////////////////////////////////////////////////////

// subscribe to the ColorChanged event with a handler function
ViewportData.EventColorChanged.Connect(colorchanged_event_handler);


// remove subscription to the ColorChanged event later by the handler function
ViewportData.EventColorChanged.Disconnect(colorchanged_event_handler);


//////////////////////////////////////////////////////////////////////////////
//   3. Subscribe to an event and unsubscribe later via an EventConnection instance
//////////////////////////////////////////////////////////////////////////////

// define a connection to be used to unsubscribe later
EventConnection colorchanged_event_connection;

// subscribe to the ColorChanged event with a lambda handler function and keeping the connection
colorchanged_event_connection = ViewportData.EventColorChanged.Connect((ViewportData viewport_data) => { 
		Log.Message("Handling ColorChanged event lambda\n");
	}
);

// ...

// you can temporarily disable a particular event connection 
colorchanged_event_connection.Enabled = false;

// ... perform certain actions

// and enable it back when necessary
colorchanged_event_connection.Enabled = true;

// ...

// remove the subscription later using the saved connection
colorchanged_event_connection.Disconnect();

//////////////////////////////////////////////////////////////////////////////
//   4. Ignoring ColorChanged events when necessary
//////////////////////////////////////////////////////////////////////////////

// you can temporarily disable the event to perform certain actions without triggering it
ViewportData.EventColorChanged.Enabled = false;

// ... actions to be performed

// and enable it back when necessary
ViewportData.EventColorChanged.Enabled = true;

Event<ViewportData> EventDebugChanged#

The event triggered on changing auxiliary debug settings. You can subscribe to events via Connect() and unsubscribe via Disconnect(). You can also use EventConnection and EventConnections classes for convenience (see examples below).

Notice

For more details see the Event Handling article.

The event handler signature is as follows: myhandler(ViewportData viewport_data)

Usage Example

Source code (C#)

// implement the DebugChanged event handler
void debugchanged_event_handler(ViewportData viewport_data)
{
	Log.Message("\Handling DebugChanged event\n");
}

//////////////////////////////////////////////////////////////////////////////
//  1. Multiple subscriptions can be linked to an EventConnections instance
//  class that you can use later to remove all these subscriptions at once
//////////////////////////////////////////////////////////////////////////////

// create an instance of the EventConnections class
EventConnections debugchanged_event_connections = new EventConnections();


// link to this instance when subscribing to an event (subscription to various events can be linked)
ViewportData.EventDebugChanged.Connect(debugchanged_event_connections, debugchanged_event_handler);

// other subscriptions are also linked to this EventConnections instance 
// (e.g. you can subscribe using lambdas)
ViewportData.EventDebugChanged.Connect(debugchanged_event_connections, (ViewportData viewport_data) => { 
		Log.Message("Handling DebugChanged event lambda\n");
		}
	);

// later all of these linked subscriptions can be removed with a single line
debugchanged_event_connections.DisconnectAll();

//////////////////////////////////////////////////////////////////////////////
//  2. You can subscribe and unsubscribe via the handler function directly
//////////////////////////////////////////////////////////////////////////////

// subscribe to the DebugChanged event with a handler function
ViewportData.EventDebugChanged.Connect(debugchanged_event_handler);


// remove subscription to the DebugChanged event later by the handler function
ViewportData.EventDebugChanged.Disconnect(debugchanged_event_handler);


//////////////////////////////////////////////////////////////////////////////
//   3. Subscribe to an event and unsubscribe later via an EventConnection instance
//////////////////////////////////////////////////////////////////////////////

// define a connection to be used to unsubscribe later
EventConnection debugchanged_event_connection;

// subscribe to the DebugChanged event with a lambda handler function and keeping the connection
debugchanged_event_connection = ViewportData.EventDebugChanged.Connect((ViewportData viewport_data) => { 
		Log.Message("Handling DebugChanged event lambda\n");
	}
);

// ...

// you can temporarily disable a particular event connection 
debugchanged_event_connection.Enabled = false;

// ... perform certain actions

// and enable it back when necessary
debugchanged_event_connection.Enabled = true;

// ...

// remove the subscription later using the saved connection
debugchanged_event_connection.Disconnect();

//////////////////////////////////////////////////////////////////////////////
//   4. Ignoring DebugChanged events when necessary
//////////////////////////////////////////////////////////////////////////////

// you can temporarily disable the event to perform certain actions without triggering it
ViewportData.EventDebugChanged.Enabled = false;

// ... actions to be performed

// and enable it back when necessary
ViewportData.EventDebugChanged.Enabled = true;

Event<ViewportData> EventSomethingChanged#

The event triggered on ANY changes in viewport configuration data (warping, blending, color correction, debug, etc.).

Notice

This event is triggered along with all other events of this class.

You can subscribe to events via Connect() and unsubscribe via Disconnect(). You can also use EventConnection and EventConnections classes for convenience (see examples below).

Notice

For more details see the Event Handling article.

The event handler signature is as follows: myhandler(ViewportData viewport_data)

Usage Example

Source code (C#)

// implement the SomethingChanged event handler
void somethingchanged_event_handler(ViewportData viewport_data)
{
	Log.Message("\Handling SomethingChanged event\n");
}

//////////////////////////////////////////////////////////////////////////////
//  1. Multiple subscriptions can be linked to an EventConnections instance
//  class that you can use later to remove all these subscriptions at once
//////////////////////////////////////////////////////////////////////////////

// create an instance of the EventConnections class
EventConnections somethingchanged_event_connections = new EventConnections();


// link to this instance when subscribing to an event (subscription to various events can be linked)
ViewportData.EventSomethingChanged.Connect(somethingchanged_event_connections, somethingchanged_event_handler);

// other subscriptions are also linked to this EventConnections instance 
// (e.g. you can subscribe using lambdas)
ViewportData.EventSomethingChanged.Connect(somethingchanged_event_connections, (ViewportData viewport_data) => { 
		Log.Message("Handling SomethingChanged event lambda\n");
		}
	);

// later all of these linked subscriptions can be removed with a single line
somethingchanged_event_connections.DisconnectAll();

//////////////////////////////////////////////////////////////////////////////
//  2. You can subscribe and unsubscribe via the handler function directly
//////////////////////////////////////////////////////////////////////////////

// subscribe to the SomethingChanged event with a handler function
ViewportData.EventSomethingChanged.Connect(somethingchanged_event_handler);


// remove subscription to the SomethingChanged event later by the handler function
ViewportData.EventSomethingChanged.Disconnect(somethingchanged_event_handler);


//////////////////////////////////////////////////////////////////////////////
//   3. Subscribe to an event and unsubscribe later via an EventConnection instance
//////////////////////////////////////////////////////////////////////////////

// define a connection to be used to unsubscribe later
EventConnection somethingchanged_event_connection;

// subscribe to the SomethingChanged event with a lambda handler function and keeping the connection
somethingchanged_event_connection = ViewportData.EventSomethingChanged.Connect((ViewportData viewport_data) => { 
		Log.Message("Handling SomethingChanged event lambda\n");
	}
);

// ...

// you can temporarily disable a particular event connection 
somethingchanged_event_connection.Enabled = false;

// ... perform certain actions

// and enable it back when necessary
somethingchanged_event_connection.Enabled = true;

// ...

// remove the subscription later using the saved connection
somethingchanged_event_connection.Disconnect();

//////////////////////////////////////////////////////////////////////////////
//   4. Ignoring SomethingChanged events when necessary
//////////////////////////////////////////////////////////////////////////////

// you can temporarily disable the event to perform certain actions without triggering it
ViewportData.EventSomethingChanged.Enabled = false;

// ... actions to be performed

// and enable it back when necessary
ViewportData.EventSomethingChanged.Enabled = true;

Members

void Update ( ) #

Updates the data displayed in the viewport.

void GrabWindowParameters ( ) #

Updates the viewport data according to the current window parameters: display index, window size and position.

bool IsGrouped ( ) #

Returns the value specifying if the viewport is in the group.

Return value

true if the viewport is a part of a group, otherwise false.

void LoadEasyBlendSettings ( string filepath ) #

Loads the settings from the EasyBlend setup file.

Arguments

string filepath - Path to the EasyBlend setup file.

void RemoveEasyblendSetup ( ) #

Removes the EasyBlend setup.

WarpGridData GetWarpGrid ( ) #

Returns the warp grid data.

Return value

WarpGridData class instance that stores the warp grid data.

BlendZonesData GetBlendZones ( ) #

Returns the blend zones data.

Return value

BlendZonesData class instance that stores the blend zones data.

MasksData GetMasks ( ) #

Returns the masks data.

Return value

MasksData class instance that stores the masks data.

ColorCorrectionData GetColorCorrection ( ) #

Returns the color correction data.

Return value

ColorCorrectionData class instance that stores the color correction data.

DebugData GetDebug ( ) #

Returns the debug data.

Return value

DebugData class instance that stores the debug data.

EasyBlendData GetEasyblendData ( ) #

Returns the EasyBlend data.

Return value

EasyBlendData class instance that stores the EasyBlend data.

void SaveXml ( Xml xml ) #

Saves the viewport data to the given instance of the Xml class.

Arguments

Xml xml - Xml class instance into which the data will be saved.

bool RestoreXml ( Xml xml ) #

Loads the viewport data from the specified instance of the Xml class.

Arguments

Xml xml - Xml class instance the data from which is to be loaded.

Return value

true if the data has been loaded successfully, otherwise false.

void Save ( Stream stream ) #

Saves the viewport data to the specified stream.

Arguments

Stream stream - Stream to which the data is to be written.

void Restore ( Stream stream ) #

Loads the viewport data from the specified stream.

Arguments

Stream stream - Stream the data from which is to be loaded.

void Copy ( ViewportData data ) #

Copies the current viewport data to the specified instance of the ViewportData class.

Arguments

ViewportData data - Viewport data.

Last update: 16.08.2024

Помогите сделать статью лучше

Была ли эта статья полезной?

Сообщить о проблеме в этой статье

(или выберите слово/фразу и нажмите Ctrl+Enter

Unigine.Plugins.SpiderVision.ViewportData Class

In This Article:

Свойства:

Методы:

ViewportData Class

Перечисления (Enums)

WINDOW_MODE#

POINT_SMOOTH_TYPE#

DISPLAY_TRANSFORM_TYPE#

Properties

int ID#

string Name#

string ComputerName#

int DisplayIndex#

ivec2 WindowSize#

ivec2 WindowPosition#

ViewportData.WINDOW_MODE WindowMode#

bool ProjectionEnabled#

vec3 Position#

vec3 Rotation#

vec2 Offset#

ViewportData.DISPLAY_TRANSFORM_TYPE Type#

vec2 Size#

float Aspect#

float VFov#

int GroupID#

Event<ViewportData> EventBaseChanged#

Event<ViewportData> EventWarpChanged#

Event<ViewportData> EventEasyblendChanged#

Event<ViewportData> EventBlendChanged#

Event<ViewportData> EventMaskChanged#

Event<ViewportData> EventColorChanged#

Event<ViewportData> EventDebugChanged#

Event<ViewportData> EventSomethingChanged#

Members

void Update ( ) #

void GrabWindowParameters ( ) #

bool IsGrouped ( ) #

Return value

void LoadEasyBlendSettings ( string filepath ) #

Arguments

void RemoveEasyblendSetup ( ) #

WarpGridData GetWarpGrid ( ) #

Return value

BlendZonesData GetBlendZones ( ) #

Return value

MasksData GetMasks ( ) #

Return value

ColorCorrectionData GetColorCorrection ( ) #

Return value

DebugData GetDebug ( ) #

Return value

EasyBlendData GetEasyblendData ( ) #

Return value

void SaveXml ( Xml xml ) #

Arguments

bool RestoreXml ( Xml xml ) #

Arguments

Return value

void Save ( Stream stream ) #

Arguments

void Restore ( Stream stream ) #

Arguments

void Copy ( ViewportData data ) #

Arguments