Unigine.GeodeticPivot Class

Свойства:

Имя	Описание
int OriginBasis	The origin basis set for the GeodeticPivot object: If ORIGIN_BASIS_LOCAL is set, the binding to geo-coordinates is disabled.
dvec3 Origin	The position (latitude, longitude and altitude) on the ellipsoid.

Методы:

Имя	Описание View: Sort by:
GeodeticPivot	GeodeticPivot constructor.
SetEllipsoid	Sets an Ellipsoid to be used for the Geodetic Pivot.
GetEllipsoid	Returns the Ellipsoid currently used by the Geodetic Pivot.
MapEllipsoidToFlat	Maps ellipsoid coordinates of a point to flat plane coordinates (using latitude and longitude as X and Y coordinates and altitude as Z).
MapFlatToEllipsoid	Maps flat plane coordinates to the ellipsoid (uses X and Y coordinates as latitude and longitude, and Z as altitude).
MapFlatToGeodetic	Maps flat plane coordinates to geodetic latitude / longitude / altitude coordinates according to pivot's origin.
MapFlatsToGeodetic	Pefrorms batch mapping of flat plane coordinates to geodetic latitude / longitude coordinates according to pivot's origin and puts the result to the corresponding output arrays.
MapGeodeticToFlat	Maps geodetic latitude / longitude / altitude coordinates to flat plane coordinates according to pivot's latitude / longitude / altitude origin.
MapGeodeticsToFlat	Pefrorms batch mapping of geodetic latitude / longitude coordinates to flat plane coordinates according to pivot's latitude / longitude origin and puts the result to the corresponding output arrays.
MapMeshEllipsoidToFlat	Maps a curved mesh to the flat plane (using latitude / longitude / altitude as X / Y / Z coordinates).
MapMeshFlatToEllipsoid	Maps a flat mesh to the ellipsoid (uses X and Y coordinates as latitude and longitude, and Z as altitude).
ToGeodetic	Returns geodetic coordinates for a given world transformation matrix.
ToWorld	Returns world transformation matrix for given geodetic coordinates.
ToWorldPreserveRotation	Returns new world transformation matrix preserving rotation relative to normal.
type	Returns the type of the object.

Variables:

Name	Description
ORIGIN_BASIS_ENU = 1	The origin basis East - North - Up (Earth-Centric) is used for the GeodeticPivot object. It is used to place the pivot to the world ECF position with ENU orientation according to latitude / longitude / altitude. The position of the GeodeticPivot object is blocked when this basis is used. Notice The Up-axis (Z+) direction in ENU points upward along the ellipsoid normal, while in UNIGINE implementation of ENU it goes from the Earth's center.
ORIGIN_BASIS_LOCAL = 0	The local (X - Y - Z) origin basis is used for the GeodeticPivot object. The pivot doesn't bind to geo-coordinates and can be placed anywhere.

Name

Description

ORIGIN_BASIS_ENU = 1

The origin basis East - North - Up (Earth-Centric) is used for the GeodeticPivot object. It is used to place the pivot to the world ECF position with ENU orientation according to latitude / longitude / altitude. The position of the GeodeticPivot object is blocked when this basis is used.

NoticeThe Up-axis (Z+) direction in ENU points upward along the ellipsoid normal, while in UNIGINE implementation of ENU it goes from the Earth's center.

ORIGIN_BASIS_LOCAL = 0

The local (X - Y - Z) origin basis is used for the GeodeticPivot object. The pivot doesn't bind to geo-coordinates and can be placed anywhere.

GeodeticPivot Class

Properties

int OriginBasis#

The origin basis set for the GeodeticPivot object:

If ORIGIN_BASIS_LOCAL is set, the binding to geo-coordinates is disabled. GeodeticPivot can be placed everywhere.
If ORIGIN_BASIS_ENU is set, GeodeticPivot is placed to the world ECF position with ENU (East - North - Up) orientation according to the given latitude / longitude / altitude. The GeodeticPivot position is blocked.
Notice
The Up-axis (Z+) direction in ENU points upward along the ellipsoid normal, while in UNIGINE implementation of ENU it goes from the Earth's center.

dvec3 Origin#

The position (latitude, longitude and altitude) on the ellipsoid.

Members

GeodeticPivot ( ) #

GeodeticPivot constructor. Creates a GeodeticPivot instance with the default settings:

The origin is set to dvec3(0.0,0.0,0.0).
The size of the curving region is 2048000×2048000 km.
The resolution of the region texture is 2048.

void SetEllipsoid ( Ellipsoid ellipsoid ) #

Sets an Ellipsoid to be used for the Geodetic Pivot.

NoticeModifying the ellipsoid of the Geodetic Pivot directly makes the pivot's state inconsistent. You should force the GeodeticPivot node to update its internal state according to the modified ellipsoid by setting it via the setEllipsoid() method.

Source code (C#)

// Creating a new geodetic pivot
GeodeticPivot pivot = new GeodeticPivot();

// setting the local (X - Y - Z) origin basis for it
pivot.setOriginBasis(GeodeticPivot.ORIGIN_BASIS_LOCAL);

// getting an ellipsoid currently used by the geodetic pivot
Ellipsoid ellipsoid = pivot.getEllipsoid();

// setting a fast calculation mode for the ellipsoid
ellipsoid.setMode(Ellipsoid.MODE_FAST);

// setting a new semimajor axis for the ellipsoid
ellipsoid.setSemimajorAxis(6378137.0f - 500.0f);

/* ... */

// force updating the geodetic pivot according to the modified ellipsoid
pivot.setEllipsoid(ellipsoid);

Arguments

Ellipsoid ellipsoid - Ellipsoid to be set.

Ellipsoid GetEllipsoid ( ) #

Returns the Ellipsoid currently used by the Geodetic Pivot.

Notice

Modifying the ellipsoid of the Geodetic Pivot directly makes the pivot's state inconsistent. You should force the GeodeticPivot node to update its internal state according to the modified ellipsoid by setting it via the setEllipsoid() method.

Source code (C#)

// Creating a new geodetic pivot
GeodeticPivot pivot = new GeodeticPivot();

// setting the local (X - Y - Z) origin basis for it
pivot.setOriginBasis(GeodeticPivot.ORIGIN_BASIS_LOCAL);

// getting an ellipsoid currently used by the geodetic pivot
Ellipsoid ellipsoid = pivot.getEllipsoid();

// setting a fast calculation mode for the ellipsoid
ellipsoid.setMode(Ellipsoid.MODE_FAST);

// setting a new semimajor axis for the ellipsoid
ellipsoid.setSemimajorAxis(6378137.0f - 500.0f);

/* ... */

// force updating the geodetic pivot according to the modified ellipsoid
pivot.setEllipsoid(ellipsoid);

Return value

Ellipsoid currently used by the Geodetic Pivot.

void MapEllipsoidToFlat ( vec3 ellipsoid_point, out vec3 ret_flat_point, out vec3 ret_ellipsoid_normal ) #

Maps ellipsoid coordinates of a point to flat plane coordinates (using latitude and longitude as X and Y coordinates and altitude as Z).

Arguments

vec3 ellipsoid_point - Ellipsoid coordinates of the point
out vec3 ret_flat_point - Flat plane coordinates of the point.
out vec3 ret_ellipsoid_normal - Ellipsoid point normal coordinates.

void MapEllipsoidToFlat ( dvec3 ellipsoid_point, out dvec3 ret_flat_point, out dvec3 ret_ellipsoid_normal ) #

Maps ellipsoid coordinates of a point to flat plane coordinates (using latitude and longitude as X and Y coordinates and altitude as Z).

Arguments

dvec3 ellipsoid_point - Ellipsoid coordinates of the point
out dvec3 ret_flat_point - Flat plane coordinates of the point.
out dvec3 ret_ellipsoid_normal - Ellipsoid point normal coordinates.

mat4 MapEllipsoidToFlat ( mat4 ellipsoid_transform ) #

Maps ellipsoid transformation to the flat plane transformation (using latitude and longitude as X and Y coordinates and altitude as Z).

Arguments

mat4 ellipsoid_transform - Ellipsoid transformation.

Return value

Flat plane transformation.

dmat4 MapEllipsoidToFlat ( dmat4 ellipsoid_transform ) #

Maps ellipsoid transformation to the flat plane transformation (using latitude and longitude as X and Y coordinates and altitude as Z).

Arguments

dmat4 ellipsoid_transform - Ellipsoid transformation.

Return value

Flat plane transformation.

void MapFlatToEllipsoid ( vec3 flat_point, out vec3 ret_ellipsoid_point, out vec3 ret_ellipsoid_normal ) #

Maps flat plane coordinates to the ellipsoid (uses X and Y coordinates as latitude and longitude, and Z as altitude).

Arguments

vec3 flat_point - Flat plane coordinates of the point.
out vec3 ret_ellipsoid_point - Ellipsoid coordinates of the point
out vec3 ret_ellipsoid_normal - Ellipsoid point normal coordinates.

void MapFlatToEllipsoid ( dvec3 flat_point, out dvec3 ret_ellipsoid_point, out dvec3 ret_ellipsoid_normal ) #

Maps flat plane coordinates to the ellipsoid (uses X and Y coordinates as latitude and longitude, and Z as altitude).

Arguments

dvec3 flat_point - Flat plane coordinates of the point.
out dvec3 ret_ellipsoid_point - Ellipsoid coordinates of the point
out dvec3 ret_ellipsoid_normal - Ellipsoid point normal coordinates.

mat4 MapFlatToEllipsoid ( mat4 flat_transform ) #

Maps flat plane transformation to the ellipsoid transformation (uses X and Y coordinates as latitude and longitude, and Z as altitude).

Arguments

mat4 flat_transform - Flat plane transformation.

Return value

Ellipsoid transformation.

dmat4 MapFlatToEllipsoid ( dmat4 flat_transform ) #

Maps flat plane transformation to the ellipsoid transformation (uses X and Y coordinates as latitude and longitude, and Z as altitude).

Arguments

dmat4 flat_transform - Flat plane transformation.

Return value

Ellipsoid transformation.

dvec3 MapFlatToGeodetic ( dvec3 flat_point ) #

Maps flat plane coordinates to geodetic latitude / longitude / altitude coordinates according to pivot's origin.

Arguments

dvec3 flat_point - Flat plane coordinates.

Return value

Geodetic coordinates.

dvec3 MapFlatToGeodetic ( vec3 flat_point ) #

Maps flat plane coordinates to geodetic latitude / longitude / altitude coordinates according to pivot's origin.

Arguments

vec3 flat_point - Flat plane coordinates.

Return value

Geodetic coordinates.

void MapFlatsToGeodetic ( double[] src_x, double[] src_y, int size, double[] OUT_ret_lat, double[] OUT_ret_lon ) #

Pefrorms batch mapping of flat plane coordinates to geodetic latitude / longitude coordinates according to pivot's origin and puts the result to the corresponding output arrays.

Arguments

double[] src_x - Array of flat plane X coordinates.
double[] src_y - Array of flat plane Y coordinates.
int size - Array size.
double[] OUT_ret_lat - Output array of geodetic latitude coordinates.
Notice
This output buffer is to be filled by the Engine as a result of executing the method.
double[] OUT_ret_lon - Output array of geodetic longitude coordinates.
Notice
This output buffer is to be filled by the Engine as a result of executing the method.

dvec3 MapGeodeticToFlat ( dvec3 geodetic_coords ) #

Maps geodetic latitude / longitude / altitude coordinates to flat plane coordinates according to pivot's latitude / longitude / altitude origin.

Arguments

dvec3 geodetic_coords - Geodetic coordinates.

Return value

Flat plane coordinates.

void MapGeodeticsToFlat ( double[] lat, double[] lon, int size, double[] OUT_ret_x, double[] OUT_ret_y ) #

Pefrorms batch mapping of geodetic latitude / longitude coordinates to flat plane coordinates according to pivot's latitude / longitude origin and puts the result to the corresponding output arrays.

Arguments

double[] lat - Array of geodetic latitude coordinates.
double[] lon - Array of geodetic longitude coordinates.
int size - Array size.
double[] OUT_ret_x - Output array of flat plane X coordinates.
Notice
This output buffer is to be filled by the Engine as a result of executing the method.
double[] OUT_ret_y - Output array of flat plane Y coordinates.
Notice
This output buffer is to be filled by the Engine as a result of executing the method.

mat4 MapMeshEllipsoidToFlat ( Mesh mesh, mat4 ellipsoid_transform ) #

Maps a curved mesh to the flat plane (using latitude / longitude / altitude as X / Y / Z coordinates).

Arguments

Mesh mesh - Mesh to be mapped.
mat4 ellipsoid_transform - Mesh ellipsoid transformation.

Return value

Position on the flat plane, where the node is to be placed.

dmat4 MapMeshEllipsoidToFlat ( Mesh mesh, dmat4 ellipsoid_transform ) #

Maps a curved mesh to the flat plane (using latitude / longitude / altitude as X / Y / Z coordinates).

Arguments

Mesh mesh - Mesh to be mapped.
dmat4 ellipsoid_transform - Mesh ellipsoid transformation.

Return value

Position on the flat plane, where the node is to be placed.

mat4 MapMeshFlatToEllipsoid ( Mesh mesh, mat4 flat_transform ) #

Maps a flat mesh to the ellipsoid (uses X and Y coordinates as latitude and longitude, and Z as altitude).

Arguments

Mesh mesh - Mesh to be mapped.
mat4 flat_transform - Mesh flat plane transformation.

Return value

Position on the ellipsoid, where the node is to be placed.

dmat4 MapMeshFlatToEllipsoid ( Mesh mesh, dmat4 flat_transform ) #

Maps a flat mesh to the ellipsoid (uses X and Y coordinates as latitude and longitude, and Z as altitude).

Arguments

Mesh mesh - Mesh to be mapped.
dmat4 flat_transform - Mesh flat plane transformation.

Return value

Position on the ellipsoid, where the node is to be placed.

dvec3 ToGeodetic ( mat4 world_transform ) #

Returns geodetic coordinates for a given world transformation matrix.

Arguments

mat4 world_transform - World transformation.

Return value

Geodetic coordinates.

dvec3 ToGeodetic ( dmat4 world_transform ) #

Returns geodetic coordinates for a given world transformation matrix.

Arguments

dmat4 world_transform - World transformation.

Return value

Geodetic coordinates.

dmat4 ToWorld ( dvec3 geodetic_coords ) #

Returns world transformation matrix for given geodetic coordinates.

Arguments

dvec3 geodetic_coords - Geodetic coordinates.

Return value

World transformation.

mat4 ToWorldPreserveRotation ( mat4 world_transform, dvec3 geodetic_coords ) #

Returns new world transformation matrix preserving rotation relative to normal.

Arguments

mat4 world_transform - World transformation.
dvec3 geodetic_coords - Geodetic coordinates.

Return value

New world transformation.

dmat4 ToWorldPreserveRotation ( dmat4 world_transform, dvec3 geodetic_coords ) #

Returns new world transformation matrix preserving rotation relative to normal.

Arguments

dmat4 world_transform - World transformation.
dvec3 geodetic_coords - Geodetic coordinates.

Return value

New world transformation.

static int type ( ) #

Returns the type of the object.

Return value

GeodeticPivot type identifier.

Last update: 13.12.2024

Помогите сделать статью лучше

Была ли эта статья полезной?

Сообщить о проблеме в этой статье

(или выберите слово/фразу и нажмите Ctrl+Enter

Unigine.GeodeticPivot Class

In This Article:

See also#

Свойства:

Методы:

Variables:

GeodeticPivot Class

Properties

int OriginBasis#

dvec3 Origin#

Members

GeodeticPivot ( ) #

void SetEllipsoid ( Ellipsoid ellipsoid ) #

Arguments

Ellipsoid GetEllipsoid ( ) #

Return value

void MapEllipsoidToFlat ( vec3 ellipsoid_point, out vec3 ret_flat_point, out vec3 ret_ellipsoid_normal ) #

Arguments

void MapEllipsoidToFlat ( dvec3 ellipsoid_point, out dvec3 ret_flat_point, out dvec3 ret_ellipsoid_normal ) #

Arguments

mat4 MapEllipsoidToFlat ( mat4 ellipsoid_transform ) #

Arguments

Return value

dmat4 MapEllipsoidToFlat ( dmat4 ellipsoid_transform ) #

Arguments

Return value

void MapFlatToEllipsoid ( vec3 flat_point, out vec3 ret_ellipsoid_point, out vec3 ret_ellipsoid_normal ) #

Arguments

void MapFlatToEllipsoid ( dvec3 flat_point, out dvec3 ret_ellipsoid_point, out dvec3 ret_ellipsoid_normal ) #

Arguments

mat4 MapFlatToEllipsoid ( mat4 flat_transform ) #

Arguments

Return value

dmat4 MapFlatToEllipsoid ( dmat4 flat_transform ) #

Arguments

Return value

dvec3 MapFlatToGeodetic ( dvec3 flat_point ) #

Arguments

Return value

dvec3 MapFlatToGeodetic ( vec3 flat_point ) #

Arguments

Return value

void MapFlatsToGeodetic ( double[] src_x, double[] src_y, int size, double[] OUT_ret_lat, double[] OUT_ret_lon ) #

Arguments

dvec3 MapGeodeticToFlat ( dvec3 geodetic_coords ) #

Arguments

Return value

void MapGeodeticsToFlat ( double[] lat, double[] lon, int size, double[] OUT_ret_x, double[] OUT_ret_y ) #

Arguments

mat4 MapMeshEllipsoidToFlat ( Mesh mesh, mat4 ellipsoid_transform ) #

Arguments

Return value

dmat4 MapMeshEllipsoidToFlat ( Mesh mesh, dmat4 ellipsoid_transform ) #

Arguments

Return value

mat4 MapMeshFlatToEllipsoid ( Mesh mesh, mat4 flat_transform ) #

Arguments

Return value

dmat4 MapMeshFlatToEllipsoid ( Mesh mesh, dmat4 flat_transform ) #

Arguments

Return value

dvec3 ToGeodetic ( mat4 world_transform ) #

Arguments

Return value

dvec3 ToGeodetic ( dmat4 world_transform ) #

Arguments

Return value

dmat4 ToWorld ( dvec3 geodetic_coords ) #

Arguments

Return value

mat4 ToWorldPreserveRotation ( mat4 world_transform, dvec3 geodetic_coords ) #

Arguments

Return value

dmat4 ToWorldPreserveRotation ( dmat4 world_transform, dvec3 geodetic_coords ) #

Arguments

Return value

static int type ( ) #

Return value