Unigine::Plugins::Syncker::Manager Class

Warning

The functionality described in this article is not available in the Community SDK edition.
You should upgrade to Sim SDK edition to use it.

Header:

#include <plugins/UnigineSyncker.h>

Notice

Syncker plugin must be loaded.

This class represents Syncker manager interface used to initialize and destroy Syncker in master and slave applications.

Methods:

Name	Description View: Sort by:
getArgIsMaster	Returns a value indicating if the command line argument "-sync_master" equals to 1.
getArgUdpPort	Returns the UDP port value set by the command line argument "-sync_port".
isMasterInitialized	Returns a value indicating if the Master was initialized.
getMaster	Returns the master interface.
isSlaveInitialized	Returns a value indicating if the slave was initialized.
getSlave	Returns the Slave interface.
isSynckerInitialized	Returns a value indicating if the Syncker (Master or Slave) was initialized.
getSyncker	Returns the syncker interface.
setDebugWindow	Sets a value indicating if the Syncker's debug window is open.
isDebugWindow	Returns a value indicating if the Syncker's debug window is enabled.
getArgAddressingMethod	Returns the addressing mode value set by the command line argument "-sync_method".
getArgSwapSyncMode	Returns the swap synchronization mode set by the command line argument "-sync_swap".
getArgPeersCount	Returns the number of peers set by the command line argument "-sync_count".
getArgBroadcastAddress	Returns the broadcast address of the Master set by the command line argument "-sync_broadcast_address".
getArgMulticastAddress	Returns the multicast address of the Master set by the command line argument "-sync_multicast_address".
getArgMasterAddress	Returns the IP address of the Master set by the command line argument "-sync_master_address".
getArgUdpSlavePort	Returns the UDP port used by the Slave set by the command line argument "-sync_slave_port".
getArgAllowExtraSlaves	Returns the value indicating if additional Slaves can be connected after starting the session set by the command line argument "-sync_allow_extra_slaves".
initMaster	Initializes the Syncker as the Master application using values specified via the command-line arguments.
initMasterBroadcast	Initializes the Syncker as the Master application with the broadcast mode enabled.
initMasterMulticast	Initializes the Syncker as the Master application with the multicast mode enabled.
initMasterUnicast	Initializes the Syncker as the Master application with the broadcast mode enabled.
initSlave	Initializes the Syncker as the Slave application using values specified via the command-line arguments.
destroySyncker	Performs shutdown and destroys the Syncker.
initSlaveBroadcast	Initializes the Syncker as the Slave application with the broadcast mode enabled.
initSlaveMulticast	Initializes the Syncker as the Slave application with the specified parameters and the multicast mode enabled.
initSlaveUnicast	Initializes the Syncker as the Slave application with the specified parameters and the unicast mode enabled.
initSyncker	Initializes the Syncker as Master or Slave application depending on the values specified via the command-line arguments.
getSyncker	Returns the base class interface for Master and Slave.
get	Returns the Manager interface.

Manager Class

Members

bool getArgIsMaster ( ) #

Returns a value indicating if the command line argument "-sync_master" equals to 1.

Return value

true if the command line argument "-sync_master" equals to 1; otherwise, false.

int getArgUdpPort ( ) #

Returns the UDP port value set by the command line argument "-sync_port".

Return value

UDP port number. The default value is 8890.

Syncker::ADDRESSING_METHOD getArgAddressingMethod ( ) #

Returns the addressing mode value set by the command line argument "-sync_method".

Return value

Current addressing mode: one of the ADDRESSING_METHOD enum values.

Syncker::SWAP_SYNC_MODE getArgSwapSyncMode ( ) const#

Returns the swap synchronization mode set by the command line argument "-sync_swap".

int getArgPeersCount ( ) #

Returns the number of peers set by the command line argument "-sync_count".

Return value

Number of peers. The default value is 1. The number of peers includes all Slaves in the network + the Master.

const char * getArgBroadcastAddress ( ) #

Returns the broadcast address of the Master set by the command line argument "-sync_broadcast_address".

Return value

Broadcast address of the Master.

const char * getArgMulticastAddress ( ) #

Returns the multicast address of the Master set by the command line argument "-sync_multicast_address".

Return value

Multicast address of the Master. The default value is 239.0.0.1

const char * getArgMasterAddress ( ) #

Returns the IP address of the Master set by the command line argument "-sync_master_address".

Notice

Available for Slave only.

Return value

IP address of the Master.

int getArgUdpSlavePort ( ) #

Returns the UDP port used by the Slave set by the command line argument "-sync_slave_port".

Notice

Available for Slave only.

Return value

UDP port used by the Slave. The default value is 0 (any unused port available).

bool getArgAllowExtraSlaves ( ) #

Returns the value indicating if additional Slaves can be connected after starting the session set by the command line argument "-sync_allow_extra_slaves".

Notice

Available for Slave only.

Return value

true if additional Slaves can be connected after starting the session; otherwise, false.

Master * initMaster ( ) #

Initializes the Syncker as the Master application using values specified via the command-line arguments.

Return value

Pointer to the Master interface.

Master * initMasterBroadcast ( int peers_count, const char * broadcast_address, unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #

Initializes the Syncker as the Master application with the broadcast mode enabled.

Notice

Slaves must be initialized with broadcast mode enabled as well.

Arguments

int peers_count - Total number of Syncker hosts in the network (including the Master itself). Similar to specifying the -sync_count command-line argument.
const char * broadcast_address - Broadcast address to be used. Similar to specifying the -sync_broadcast_address command-line argument.
unsigned short udp_port - Broadcast address to be used. Similar to specifying the -sync_broadcast_address command-line argument.
Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.

Return value

Pointer to the Master interface.

Master * initMasterMulticast ( int peers_count, const char * multicast_address, unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #

Initializes the Syncker as the Master application with the multicast mode enabled.

Arguments

int peers_count - Total number of Syncker hosts in the network (including the Master itself). Similar to specifying the -sync_count command-line argument.
const char * multicast_address - Multicast address to be used. Similar to specifying the -sync_multicast_address command-line argument.
unsigned short udp_port - UDP port to be used. Similar to specifying the -sync_port command-line argument.
Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.

Return value

Pointer to the Master interface.

Master * initMasterUnicast ( int peers_count, unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #

Initializes the Syncker as the Master application with the broadcast mode enabled.

Notice

Slaves must be initialized with broadcast mode enabled as well.

Arguments

int peers_count - Total number of Syncker hosts in the network (including the Master itself). Similar to specifying the -sync_count command-line argument.
unsigned short udp_port - UDP port to be used. Similar to specifying the -sync_port command-line argument.
Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.

Return value

Pointer to the Master interface.

bool isMasterInitialized ( ) #

Returns a value indicating if the Master was initialized.

Return value

true if the Master was initialized; otherwise, false.

Master * getMaster ( ) #

Returns the master interface.

Return value

Pointer to the Master interface.

Slave * initSlave ( ) #

Initializes the Syncker as the Slave application using values specified via the command-line arguments.

Return value

Pointer to the Slave interface.

bool isSlaveInitialized ( ) #

Returns a value indicating if the slave was initialized.

Return value

1 if the slave was initialized; otherwise, 0.

Slave * getSlave ( ) #

Returns the Slave interface.

Return value

Pointer to the slave interface.

bool isSynckerInitialized ( ) #

Returns a value indicating if the Syncker (Master or Slave) was initialized.

Return value

1 if the Syncker (master or slave) was initialized; otherwise, 0.

Syncker * getSyncker ( ) #

Returns the syncker interface.

Return value

Pointer to the syncker interface.

void setDebugWindow ( bool window ) #

Sets a value indicating if the Syncker's debug window is open.

Arguments

bool window - Enable flag. Use 1 to show the debug window, or 0 - to hide it.

bool isDebugWindow ( ) #

Returns a value indicating if the Syncker's debug window is enabled.

Return value

true if the Syncker's debug window is enabled; otherwise, false.

void destroySyncker ( ) #

Performs shutdown and destroys the Syncker.

Notice

Called automatically, when the plugin is unloaded.

Slave * initSlaveBroadcast ( unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #

Initializes the Syncker as the Slave application with the broadcast mode enabled. Master's IP address will be detected automatically.

Notice

Master must be initialized with broadcast mode enabled as well.

Arguments

unsigned short udp_port - UDP port to be used. Similar to specifying the -sync_port command-line argument.
Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.

Return value

Pointer to the slave interface.

Slave * initSlaveBroadcast ( const char * master_address, unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #

Initializes the Syncker as the Slave application with the specified parameters and the broadcast mode enabled. Master's IP address is specified explicitly.

Notice

Master must be initialized with broadcast mode enabled as well.

Arguments

const char * master_address - Master IP address to be used. Similar to specifying the -sync_master_address command-line argument.
unsigned short udp_port - UDP port to be used. Similar to specifying the -sync_port command-line argument.
Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.

Return value

Pointer to the slave interface.

Slave * initSlaveMulticast ( const char * multicast_address, unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #

Initializes the Syncker as the Slave application with the specified parameters and the multicast mode enabled. Master's IP address will be detected automatically.

Notice

Master must be initialized with broadcast mode enabled as well.

Arguments

const char * multicast_address - Multicast address to be used. Similar to specifying the -sync_multicast_address command-line argument.
unsigned short udp_port - UDP port to be used. Similar to specifying the -sync_port command-line argument.
Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.

Return value

Pointer to the slave interface.

Slave * initSlaveMulticast ( const char * master_address, const char * multicast_address, unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #

Initializes the Syncker as the Slave application with the specified parameters and the multicast mode enabled. Master's IP address is specified explicitly.

Notice

Master must be initialized with broadcast mode enabled as well.

Arguments

const char * master_address - Master IP address to be used. Similar to specifying the -sync_master_address command-line argument.
const char * multicast_address - Multicast address to be used. Similar to specifying the -sync_multicast_address command-line argument.
unsigned short udp_port - UDP port to be used. Similar to specifying the -sync_port command-line argument.
Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.

Return value

Pointer to the slave interface.

Slave * initSlaveUnicast ( unsigned short master_udp_port, unsigned short slave_udp_port = 0, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #

Initializes the Syncker as the Slave application with the specified parameters and the unicast mode enabled. Master's IP address will be detected automatically.

Notice

Master must be initialized with broadcast mode enabled as well.

Arguments

unsigned short master_udp_port - UDP port to be used by the Master.
unsigned short slave_udp_port - UDP port to be used by the Slave. Similar to specifying the -sync_slave_port command-line argument.
Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.

Return value

Pointer to the slave interface.

Slave * initSlaveUnicast ( const char * master_address, unsigned short master_udp_port, unsigned short slave_udp_port = 0, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #

Initializes the Syncker as the Slave application with the specified parameters and the unicast mode enabled. Master's IP address is specified explicitly.

Notice

Master must be initialized with broadcast mode enabled as well.

Arguments

const char * master_address - Master IP address to be used. Similar to specifying the -sync_master_address command-line argument.
unsigned short master_udp_port - UDP port to be used by the Master.
unsigned short slave_udp_port - UDP port to be used by the Slave. Similar to specifying the -sync_slave_port command-line argument.
Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.

Return value

Pointer to the slave interface.

Syncker * initSyncker ( ) #

Initializes the Syncker as Master or Slave application depending on the values specified via the command-line arguments.

Return value

Pointer to the syncker interface. It is the base class for Master and Slave.

Syncker * getSyncker ( ) #

Returns the base class interface for Master and Slave.

Return value

Pointer to the syncker interface. It is the base class for Master and Slave.

Manager * get ( ) #

Returns the Manager interface.

Return value

Pointer to the manager interface.

Last update: 17.02.2021

Помогите сделать статью лучше

Была ли эта статья полезной?

Сообщить о проблеме в этой статье

(или выберите слово/фразу и нажмите Ctrl+Enter