Unigine::Plugins::Syncker::Manager Class

Manager Class

Members

---

bool getArgIsMaster ( ) #

Returns a value indicating if the command line argument "-sync_master" equals to 1.

Return value

true if the command line argument "-sync_master" equals to 1; otherwise, false.

bool getArgInitSyncker ( ) const#

Returns a value indicating if the command line argument "-sync_init" equals to 1.

int getArgUdpPort ( ) #

Returns the UDP port value set by the command line argument "-sync_port".

Return value

UDP port number. The default value is 8890.

Syncker::ADDRESSING_METHOD getArgAddressingMethod ( ) #

Returns the addressing mode value set by the command line argument "-sync_method".

Return value

Current addressing mode: one of the ADDRESSING_METHOD enum values.

Syncker::SWAP_SYNC_MODE getArgSwapSyncMode ( ) const#

Returns the swap synchronization mode set by the command line argument "-sync_swap".

int getArgPeersCount ( ) #

Returns the number of peers set by the command line argument "-sync_count".

Return value

Number of peers. The default value is 1. The number of peers includes all Slaves in the network + the Master.

const char * getArgBroadcastAddress ( ) #

Returns the broadcast address of the Master set by the command line argument "-sync_broadcast_address".

Return value

Broadcast address of the Master.

const char * getArgMulticastAddress ( ) #

Returns the multicast address of the Master set by the command line argument "-sync_multicast_address".

Return value

Multicast address of the Master. The default value is 239.0.0.1

const char * getArgMasterAddress ( ) #

Returns the IP address of the Master set by the command line argument "-sync_master_address".

Return value

IP address of the Master.

int getArgUdpSlavePort ( ) #

Returns the UDP port used by the Slave set by the command line argument "-sync_slave_port".

Return value

UDP port used by the Slave. The default value is 0 (any unused port available).

bool getArgAllowExtraSlaves ( ) #

Returns the value indicating if additional Slaves can be connected after starting the session set by the command line argument "-sync_allow_extra_slaves".

Return value

true if additional Slaves can be connected after starting the session; otherwise, false.

Master * initMaster ( ) #

Initializes the Syncker as the Master application using values specified via the command-line arguments.

Return value

Pointer to the Master interface.

Master * initMasterBroadcast ( int peers_count, const char * broadcast_address, unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #

Initializes the Syncker as the Master application with the broadcast mode enabled.

Arguments

• int peers_count - Total number of Syncker hosts in the network (including the Master itself). Similar to specifying the -sync_count command-line argument.
• const char * broadcast_address - Broadcast address to be used. Similar to specifying the -sync_broadcast_address command-line argument.
• unsigned short udp_port - Broadcast address to be used. Similar to specifying the -sync_broadcast_address command-line argument.
• Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.

Return value

Pointer to the Master interface.

Master * initMasterMulticast ( int peers_count, const char * multicast_address, unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #

Initializes the Syncker as the Master application with the multicast mode enabled.

Arguments

• int peers_count - Total number of Syncker hosts in the network (including the Master itself). Similar to specifying the -sync_count command-line argument.
• const char * multicast_address - Multicast address to be used. Similar to specifying the -sync_multicast_address command-line argument.
• unsigned short udp_port - UDP port to be used. Similar to specifying the -sync_port command-line argument.
• Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.

Return value

Pointer to the Master interface.

Master * initMasterUnicast ( int peers_count, unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #

Initializes the Syncker as the Master application with the broadcast mode enabled.

Arguments

• int peers_count - Total number of Syncker hosts in the network (including the Master itself). Similar to specifying the -sync_count command-line argument.
• unsigned short udp_port - UDP port to be used. Similar to specifying the -sync_port command-line argument.
• Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.

Return value

Pointer to the Master interface.

bool isMasterInitialized ( ) #

Returns a value indicating if the Master was initialized.

Return value

true if the Master was initialized; otherwise, false.

Master * getMaster ( ) #

Returns the master interface.

Return value

Pointer to the Master interface.

Slave * initSlave ( ) #

Initializes the Syncker as the Slave application using values specified via the command-line arguments.

Return value

Pointer to the Slave interface.

bool isSlaveInitialized ( ) #

Returns a value indicating if the slave was initialized.

Return value

1 if the slave was initialized; otherwise, 0.

Slave * getSlave ( ) #

Returns the Slave interface.

Return value

Pointer to the slave interface.

bool isSynckerInitialized ( ) #

Returns a value indicating if the Syncker (Master or Slave) was initialized.

Return value

1 if the Syncker (master or slave) was initialized; otherwise, 0.

Syncker * getSyncker ( ) #

Returns the base class interface for Master and Slave.

Return value

Pointer to the syncker interface. It is the base class for Master and Slave.

void setDebugWindow ( bool window ) #

Sets a value indicating if the Syncker's debug window is open.

Arguments

• bool window - Enable flag. Use 1 to show the debug window, or 0 - to hide it.

bool isDebugWindow ( ) #

Returns a value indicating if the Syncker's debug window is enabled.

Return value

true if the Syncker's debug window is enabled; otherwise, false.

void destroySyncker ( ) #

Performs shutdown and destroys the Syncker.

Slave * initSlaveBroadcast ( unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #

Initializes the Syncker as the Slave application with the broadcast mode enabled. Master's IP address will be detected automatically.

Arguments

• unsigned short udp_port - UDP port to be used. Similar to specifying the -sync_port command-line argument.
• Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.

Return value

Pointer to the slave interface.

Slave * initSlaveBroadcast ( const char * master_address, unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #

Initializes the Syncker as the Slave application with the specified parameters and the broadcast mode enabled. Master's IP address is specified explicitly.

Arguments

• const char * master_address - Master IP address to be used. Similar to specifying the -sync_master_address command-line argument.
• unsigned short udp_port - UDP port to be used. Similar to specifying the -sync_port command-line argument.
• Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.

Return value

Pointer to the slave interface.

Slave * initSlaveMulticast ( const char * multicast_address, unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #

Initializes the Syncker as the Slave application with the specified parameters and the multicast mode enabled. Master's IP address will be detected automatically.

Arguments

• const char * multicast_address - Multicast address to be used. Similar to specifying the -sync_multicast_address command-line argument.
• unsigned short udp_port - UDP port to be used. Similar to specifying the -sync_port command-line argument.
• Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.

Return value

Pointer to the slave interface.

Slave * initSlaveMulticast ( const char * master_address, const char * multicast_address, unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #

Initializes the Syncker as the Slave application with the specified parameters and the multicast mode enabled. Master's IP address is specified explicitly.

Arguments

• const char * master_address - Master IP address to be used. Similar to specifying the -sync_master_address command-line argument.
• const char * multicast_address - Multicast address to be used. Similar to specifying the -sync_multicast_address command-line argument.
• unsigned short udp_port - UDP port to be used. Similar to specifying the -sync_port command-line argument.
• Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.

Return value

Pointer to the slave interface.

Slave * initSlaveUnicast ( unsigned short master_udp_port, unsigned short slave_udp_port = 0, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #

Initializes the Syncker as the Slave application with the specified parameters and the unicast mode enabled. Master's IP address will be detected automatically.

Arguments

• unsigned short master_udp_port - UDP port to be used by the Master.
• unsigned short slave_udp_port - UDP port to be used by the Slave. Similar to specifying the -sync_slave_port command-line argument.
• Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.

Return value

Pointer to the slave interface.

Slave * initSlaveUnicast ( const char * master_address, unsigned short master_udp_port, unsigned short slave_udp_port = 0, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #

Initializes the Syncker as the Slave application with the specified parameters and the unicast mode enabled. Master's IP address is specified explicitly.

Arguments

• const char * master_address - Master IP address to be used. Similar to specifying the -sync_master_address command-line argument.
• unsigned short master_udp_port - UDP port to be used by the Master.
• unsigned short slave_udp_port - UDP port to be used by the Slave. Similar to specifying the -sync_slave_port command-line argument.
• Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.

Return value

Pointer to the slave interface.

Syncker * initSyncker ( ) #

Initializes the Syncker as Master or Slave application depending on the values specified via the command-line arguments.

Return value

Pointer to the syncker interface. It is the base class for Master and Slave.

Manager * get ( ) #

Returns the Manager interface.

Return value

Pointer to the manager interface.