Operators
Once we know of the existence of variables, we can begin to operate with them. For that purpose, UnigineScript integrates operators. Operatorsare mostly made of signs that are not part of the alphabet but are available in all keyboards.
Numerical Operators
Operation  Operator  Type  Description  Operand Types 

Negation    unary  Returns a negated value of the operand (changes its sign to the opposite)  Scalars, vectors 
Increment  ++  unary  Increments the operand by 1 (both prefix and postfix notations are supported)  Scalars 
Decrement    unary  Decrements the operand by 1 (both prefix and postfix notations are supported)  Scalars 
Multiplication  *  binary  Multiplies one operand by another  Scalars, vectors 
Division  /  binary  Divides the first operand by the second operand  Scalars, vectors 
Modulo  %  binary  Returns a remainder after numerical division of the first operand by the second operand  int,long,floatanddouble 
Addition  +  binary  Adds one operand to another  Scalars, vectors, string 
Subtraction    binary  Subtracts the second operand from the first operand  Scalars, vectors 
int a = 0, b = 0;
log.message("%d %d\n",++a,b++);
log.message("%d %d\n",++a,b++);
log.message("%d %d\n",a,b);
/* Output:
* 1 0
* 2 1
* 2 2
*/
Scalar Operands
All numerical operators that take two operands of different types perform an automatic conversion of scalars. The result is always the biggesttype of two.
Vector Operands
Some of numerical operators are applicable to vector types. All vector types can be added to, subtracted from and multiplied by operands of the same type. However, when performing operations on different types of vector operands or vectors and scalars, only specific combinations of operands are possible, because vector types are mostly nonconvertible.
String Operators
These operators take only stringvariables as operands.
Operation  Operator  Type  Description 

Concatenation  +  binary  A string into which two operands are joined 
Strings can be concatenated not only with strings but with variables of any base type due to type casting.
float a = 3.9;
string str = "there can be a mixture";
str = str + " of integer (" + 56 + ") and floating point values (" + a + ")";
log.message("%s\n", str);
/* Output:
* there can be a mixture of integer (56) and floating point values (3.9)
*/
Logical and Bitwise Operators
These operators take only the following types of variables as operands:
Operation  Operator  Type  Description  Operand Types 

Logical NOT  !  unary  Negates a boolean expression  int,long 
Logical AND  &&  binary  true, if both operands are true  int,long 
Logical OR    binary  true, if one or both operands are true  int,long 
Bitwise NOT (complement)  ~  unary  Logical negation of each bit  int,long 
Bitwise AND  &  binary  Logical AND operation on each pair of corresponding bits  int,long 
Bitwise inclusive OR    binary  Logical OR operation on each pair of corresponding bits  int,long 
Bitwise exclusive OR  ^  binary  Logical XOR operation on each pair of corresponding bits  int,long 
Shift left  <<  binary  Shift bit pattern in the first operand to the left by the number of bits specified by the second operand  int,long
ivec3orivec4can also be the 1st operand 
Shift right  >>  binary  Shift bit pattern in the first operand to the right by the number of bits specified by the second operand  int,long
ivec3orivec4can also be the 1st operand 
All nonzero values are equal to true, however, if true should be returned as a result of some operation, it will be always 1. false is always 0.
Comparison Operators
 Scalars of different types (int,long,float,double) can be freely comapared to each other, beacause of theautomatic conversion of scalars.
 Vectors (vec3,vec4,dvec3,dvec4,ivec3,ivec4,mat4,quat) can only be compared with thesametype.
Operation  Operator  Description  Operand Types 

Equal to  ==  Tests if both operands are equal  Scalars, vectors, string
int(0) can be compared to an empty string and v.v. 
Not equal to  !=  Tests if both operands are not equal  Scalars, vectors, string
int(0) can be compared to an empty string and v.v. 
Less than  <  Tests if the first operand is less than the second operand  Scalars, string 
Greater  >  Tests if the first operand is greater than the second operand  Scalars, string 
Less than or equal to  <=  Tests if the first operand is less than the second operand or equal to it  Scalars, string 
Greater than or equal to  >=  Tests if the first operand is greater than the second operand or equal to it  Scalars, string 
If the statement is true, the operator returns 1, otherwise 0.
Assignment Operators
Operation  Operator  Type  Description 

Assignment  =  binary  Assign a value of the second operand to the first operand 
"Ifthenelse" replacement  ? :  ternary  Can be used for conditional assignment, if this whole expression is the second operand of the assignment 
The conditional operator ?: can be used as a shorthand for what would normally be singleline blocks of the "ifthenelse" construction. If used appropriately, this operator can enhance readability of code. Its syntax is the following: test_expression1 ? then_expression : else_expression.
int a = 10;
int b;
b = (a > 9) ? 100 : 200; // ternary operator usage
// this expression is equal to the previous one
if(a > 9) {
b = 100;
} else {
b = 200;
}
log.message("b =" + (b))
/* Output:
* b = 200
*/
It is also possible to use the ?: operator in expressions. For example:
int a = 1;
int b = 2;
int c = 3;
int d = 4;
log.message("%s\n","test 1: " + (a == b) ? "a == b" : "a != b" + " final");
log.message("%s\n","test 2: " + ((c == d) ? "c == d" : "c != d") + " final");
log.message("%s\n","test 3: " + (a == b) ? "a == b and " + ((c == d) ? "c == d" : "c != d") : ("a != b and " + ((c == d) ? "c == d" : "c != d")));
test1: a != b final
test2: c != d final
test3: a != b and c != d
The assignment operator = can be combined with +, , *, /, %, &, , and ^. These combined operators (+=, =, *=, /=, %=, &=, =, and ^=) assign the result of the operation to the first operand (which must be a variable).
int a = 10;
int b, c;
a = b = c; // this won't work
a = b += c; // this won't work either
Access Operators
Operation  Operator  Type  Description 

Member access  .  binary  Access a member (the second operand) of the first operand. Can be used with: 
Scope resolution  :: 

Access an identifier outside its scope. For details, see scope resolution operator. 
Access by index  []  binary  Access an element by it index. Can be used with classes, vectors, maps, vec3, vec4, mat4, and quat 
Type Testing Operator
The type testing operator isserves to check the type of a given variable. The operator returns1 when:
 A given variable belongs to a specified type
 A given object is an instance of a specified class
 A given object is an instance of a class that derives from a specified class
The syntax of the operator is the following:
i is int
 One of the scalar types
 One of the vector types
 String
 Userdefined class name
 External class name
For example, this operator can be used in an ifelse statement:
class Foo { };
class Bar : Foo { };
void check(int v) {
string s = typeinfo(v);
// both the is operator and the is_int() function check if v is of the int type
if(v is int) log.message("%s is int\n",s);
if(is_int(v)) log.message("%s is int\n",s);
// check if v is of the float type
if(v is float) log.message("%s is float\n",s);
if(is_float(v)) log.message("%s is float\n",s);
// check if v is an instance of the Stream class or class derived from the Stream
if(v is Stream) log.message("%s is Stream\n",s);
// check if v is an instance of the File class
if(v is File) log.message("%s is File\n",s);
// check if v is an instance of the Foo or Bar class
if(v is Foo) log.message("%s is Foo\n",s);
// check if v is an instance of the Bar class
if(v is Bar) log.message("%s is Bar\n",s);
}
check(1);
check(1.0f);
check(new File());
check(new Foo());
check(new Bar());
int: 1 is int
int: 1 is int
float: 1 is int
float: 1 is int
File 000000000E9330E0 internal (5:0:0) is Stream
File 000000000E9330E0 internal (5:0:0) is File
Foo 000000000D06FCD0 (131072:0:0) is Foo
Bar 000000000D06FD00 (196608:0:0) is Foo
Bar 000000000D06FD00 (196608:0:0) is Bar
Operator Precedence
If an expression contains several operators, they will be evaluated in the order shown below, from the top to the bottom.
Operation  Operator 

Parentheses  () 
Access operators  [] . 
Unary operators  !  + ++  
Multiplicative operators  * / 
Additive operators, string concatenation  +  
Bitwise shift  << >> 
Comparison operators  == != < > <= >= 
Bitwise NOT  ~ 
Bitwise AND  & 
Bitwise exclusive OR  ^ 
Bitwise OR   
Logical NOT  ! 
Logical AND  && 
Logical OR   
Assignment operators  = += = *= /= %= &= = ^= ?: 
Operator Overloading
You can read about operator overloading here.