CigiSensorControl Class
Warning
The functionality described in this article is not available in the Community SDK edition.
You should upgrade to- Sim
SDK edition to use it.
You should upgrade to
| Inherits from: | CigiHostPacket |
CigiSensorControl Class
Properties
int ViewID#
The view ID specified in the packet.
int SensorID#
The sensor ID specified in the packet.
int SensorEnabled#
The value of the Sensor On/Off parameter specified in the packet.
int Polarity#
The value of the Polarity parameter specified in the packet. Determines whether the sensor shows white hot or black hot.
int DropoutEnabled#
The value of the Line-by-Line Dropout Enable parameter specified in the packet. This effect is meant to simulate the horizontal stripes caused by a transient loss of video information.
int AutomaticGain#
The value of the Automatic Gain parameter specified in the packet.
int TrackColor#
The value of the Track White/Black parameter specified in the packet.
int TrackMode#
The value of the Track Mode parameter specified in the packet. Determines which track mode the sensor will use.
int Response#
The value of the Response Type parameter specified in the packet.
float Gain#
The value of the Gain parameter specified in the packet. Determines the contrast of the sensor display.
float Level#
The value of the Level parameter specified in the packet. Determines the brightness of the sensor display.
float Coupling#
The value of the AC Coupling parameter specified in the packet. Determines the AC coupling decay constant for the sensor display.
float Noise#
The value of the Noise parameter specified in the packet. Determines the amount of detector noise for the sensor.
Members
Last update:
2024-04-19
Help improve this article
Was this article helpful?
(or select a word/phrase and press Ctrl+Enter)