WorldSplineGraph Class
Warning
The scope of applications for UnigineScript is limited to implementing materials-related logic (material expressions, scriptable materials, brush materials). Do not use UnigineScript as a language for application logic, please consider C#/C++ instead, as these APIs are the preferred ones. Availability of new Engine features in UnigineScipt (beyond its scope of applications) is not guaranteed, as the current level of support assumes only fixing critical issues.
| Inherits: | Node |
Warning
This feature is an experimental one and is not recommended for production use.
This class is used to generate specified nodes (called source nodes) along a spline graph.
UNIGINE's 3D spline system has a wide range of applications, particularly procedural content generation (rivers, roads, pipelines etc.).
A spline graph is determined by a set of points p0, p 1, ... p n and a set of segments (cubic Bezier splines), that connect some or all of these points.
Each segment is determined by the indices of the starting (pSTART ) and ending (pEND ) points and tangent vector coordinates at these points, which determine the form of the segment (tSTART and tEND respectively).
Coordinates of the "up" vector are additionally stored for each point of the segment. You can specify this vector to define orientation of geometry or objects, that can be stretched or tiled along the segments of the spline graph. By default this vector is parallel to the Z axis. The "up" vector does not affect the form of the spline segment.
It is possible to obtain an interpolated value for any point belonging to a segment, this can be used for various purposes (e.g. to change road profile). Interpolated "up" vector can be calculated as follows (pseudocode):
Source code (C++)
vec3 lerpUpVector(vec3 start_up, vec3 end_up, float t) const
{
float angle = acos(dot(start_up, end_up)) * RAD2DEG;
vec3 rotation_axis = cross(start_up, end_up);
return rotateAxisAngle(rotation_axis, angle * t) * start_up;
}A world spline graph consists of segments and has a list of source nodes (currently ObjectMeshStatic, ObjectMeshSkinned, and DecalProj) that can be placed at points and along the segments of the spline graph. Each point and segment can have a single or a set of source nodes assigned. An arbitrary number of WorldSplineGraph nodes can be added to the scene.
WorldSplineGraph has the following features:
- Points of the spline graph are managed via the SplinePoint class.
- Segments of the spline graph are managed via the SplineSegment class.
- 3 modes are supported:
- stretching: source nodes are stretched along the spline segment.
- tiling: source nodes are duplicated along the spline segment.
- adaptive - represents a combination of the first two: source nodes are duplicated along the spline segment, but the length of each node (stretching) is determined by the curvature of the corresponding part of the segment. Thus, long nodes are placed along the straight parts of segments, while short ones - along the curved parts, providing a reasonable balance between the plausible look and performance.
- Forward axis selection for stretching/tiling source nodes.
See Also#
See the article on the World Spline Graph object.
See the following UnigineScript API samples to learn how to manage the WorldSplineGraph class:
<UnigineSDK>/data/samples/worlds/world_spline_graph_00 featuring:
- Creation of a WorldSplineGraph node from a SplineGraph file
- Generation of geometry along the graph segments in stretching mode
<UnigineSDK>/data/samples/worlds/world_spline_graph_01 featuring:
- Creation of a WorldSplineGraph node from a SplineGraph file
- Generation of geometry along the graph segments in tiling mode
The C++ API sample <UnigineSDK>/source/samples/Api/Nodes/SplineGraph
WorldSplineGraph Class
Members
static WorldSplineGraph ( ) #
Default constructor. Creates an empty world spline graph.static WorldSplineGraph ( string name ) #
Constructor. Creates an empty world spline graph with a given name.Arguments
- string name - World spline graph name.
int getNumSplinePoints ( ) #
Returns the total number of spline points in the world spline graph.Return value
Number of spline points.int getNumSplineSegments ( ) #
Returns the total number of spline segments in the world spline graph.Return value
Number of segments.void setSplineGraphName ( string name, int force_load = 0 ) #
Sets the name of the world spline graph.Arguments
- string name - World spline graph name.
- int force_load - Force flag.
- If 1 is specified, the world spline graph will immediately loaded from a file.
- If 0 is specified, only the world spline graph name will be updated.
string getSplineGraphName ( ) #
Returns the name of the world spline graph.Return value
World spline graph name.void loadSegmentNodes ( int segment_index = -1 ) #
Loads source nodes assigned to the specified spline segment immediately.Arguments
- int segment_index - Segment index. If no segment index is specified, the method loads source nodes assigned to all segments.
void clear ( ) #
Clears the world spline graph.int isCurved ( ) #
Returns a value indicating if the world spline graph is curved.Return value
1 if the world spline graph is curved; otherwise, 0.void makeCurved ( ) #
Curves the world spline graph using its geodetic pivot. The spline file is saved upon completion of the curving operation.Notice
The world spline graph must be a child of a Geodetic Pivot node.
void makeFlat ( ) #
Flattens the world spline graph using its geodetic pivot. The spline file is saved upon completion of the flattening operation.Notice
The world spline graph must be a child of a Geodetic Pivot node.
int load ( string name ) #
Loads a spline graph from the specified XML-file.Arguments
- string name - Name of the XML-file to load the spline graph from.
Return value
1 if the spline graph was successfully loaded; otherwise, 0.int save ( string name ) #
Saves a spline graph to the specified XML-file.Arguments
- string name - Name of the XML-file to save the spline graph to.
Return value
1 if the spline graph was successfully saved; otherwise, 0.static int type ( ) #
Returns the type of the node.Return value
WorldSplineGraph type identifier.void getSegmentNodeMesh ( Mesh mesh, SplineSegment segment, int node_index, int bake_transform = 0 ) #
Gets a mesh used by a node with the specified index, placed along the specified spline segment, and puts it to the specified target Mesh instance.Arguments
- Mesh mesh - Target mesh instance to which the obtained mesh is to be put.
- SplineSegment segment - Spline segment for which the mesh is to be returned.
- int node_index - Number of the node instance placed along the spline segment.
- int bake_transform - 1 to use baked mesh transformation, 0 - to use default (the mesh will be placed at the origin). The default value is 0.
SplinePoint createSplinePoint ( Vec3 position ) #
Creates a new spline point with the specified parameters and attaches it to the world spline graph.Arguments
- Vec3 position - Position coordinates for the new splint point.
Return value
New spline point.void removeSplinePoint ( SplinePoint point, int merge = 0 ) #
Removes the specified spline point from the world spline graph. You can set the merge flag to merge spline segments sharing this point as their start and end points.Notice
Segment merging is available only when the point to be removed is shared by two segments, otherwise the merge flag is ignored and all segments sharing this point are also removed.
Arguments
- SplinePoint point - Spline point to be removed.
- int merge - 1 to merge spline segments sharing this point as their start and end points, 0 to remove all segments sharing this point. The default value is 0.
void getSplinePoints ( ) #
Returns the list of all points of the world spline graph and puts them to the specified vector of SplinePoint elements.Arguments
SplineSegment createSplineSegment ( SplinePoint start_point, vec3 start_tangent, vec3 start_up, SplinePoint end_point, vec3 end_tangent, vec3 end_up ) #
Creates a new spline segment with the specified parameters and attaches it to the world spline graph.Arguments
- SplinePoint start_point - Start point of the spline segment.
- vec3 start_tangent - Tangent coordinates for the start point of the spline segment.
- vec3 start_up - Coordinates of the "up" vector for the start point of the spline segment.
- SplinePoint end_point - End point of the segment.
- vec3 end_tangent - Tangent coordinates for the end point of the spline segment.
- vec3 end_up - Coordinates of the "up" vector for the end point of the spline segment.
Return value
New spline segment connecting two specified points.void removeSplineSegment ( SplineSegment segment, int with_points = 0 ) #
Removes the specified spline segment from the world spline graph. You can set the with_points flag to remove the segment together with its start and end points.Arguments
- SplineSegment segment - Spline segment to be removed.
- int with_points - 1 to remove the segment with its start and end points, 0 to keep points. The default value is 0.
void getSplineSegments ( ) #
Returns the list of all segments of the world spline graph and puts them to the specified vector of SplineSegment elements.Arguments
void rebuild ( int try_force = 0 ) #
Rebuilds the world spline graph. This method is to be called after making any changes to spline segments (mode, etc.), point positions, tangents, or "up" vectors, as well as after changing source node assignments and/or other parameters (UV tiling, gap, etc.)Arguments
- int try_force - Forced rebuild flag: set 1 to try and force rebuild the world spline graph.
int isRebuilding ( ) #
Returns a value indicating if the world spline graph is currently being rebuilt. The world spline graph uses a deferred rebuild.Return value
1 if the world spline graph is currently being rebuilt; otherwise 0.void splitSplineSegment ( SplineSegment segment, float new_point_t ) #
Splits the specified spline segment into two parts by inserting a new point placed at the specified distance from the segment's start point.Arguments
- SplineSegment segment - Spline segment to be split.
- float new_point_t - Relative distance from the start point as a fraction of the segment's length in the [0.0f, 1.0f] range.
void breakSplinePoint ( SplinePoint point ) #
Breaks the specified spline point shared by several spline segments into a set of separate ones, so that each of the segments gets its own point.Arguments
- SplinePoint point - Spline point to be broken.
NoticeThe point must be shared by a least 2 segments.
int isLinked ( const SplinePoint point ) #
Returns a value indicating if the specified spline point is linked to any spline segment.Arguments
- const SplinePoint point - Spline point to be checked.
Return value
1 if the specified spline point is linked to any spline segment; otherwise, 0.Last update:
2020-07-31
Help improve this article
Was this article helpful?
(or select a word/phrase and press Ctrl+Enter)