Unigine::SoundSource Class
| Header: | #include <UnigineSounds.h> |
| Inherits from: | Node |
This class is used to create directional sound sources. The source's sound fades out linearly in a specified range (see getMinDistance() and getMaxDistance()). If inner and outer sound cones are defined, they will also have their share in the attenuation factor (see the getConeInnerAngle() and getConeOuterAngle() functions).
Notice
Attenuation is available only for mono sound sources. If a source is the stereo one, it won't attenuate with the distance.
Sound sources are automatically handled by the sound manager. When the sound source is within the audible range, it is loaded into the memory (a full sample or its chunk, depending on whether the source is static or streamed). When it gets outside the audible range, the sound file is automatically deleted from the memory. Static sound sources are instanced; streamed ones are not.
If you still want to manage a sound source manually, you can check if it has stopped
playing and after that delete it.
There is also no limitation on the number of sound sources in the world, as only currently audible ones are rendered. In the worst case scenario, when the number of simultaneously heard sound sources exceeds the hardware capabilities, some of them will not be played.
Creating a Sound Source#
To create a sound source, create an instance of the SoundSource class and specify all required settings:
Source code (C++)
// create a new sound source using the given sound sample file
SoundSourcePtr sound = SoundSource::create("sound.mp3");
// disable sound muffling when being occluded
sound->setOcclusion(0);
// set the distance at which the sound gets clear
sound->setMinDistance(10.0f);
// set the distance at which the sound becomes out of audible range
sound->setMaxDistance(100.0f);
// set the gain that result in attenuation of 6 dB
sound->setGain(0.5f);
// loop the sound
sound->setLoop(1);
// start playing the sound sample
sound->play();Updating an Existing Sound Source#
To update the sound source settings, you can call the corresponding methods:
Source code (C++)
// change the sample file of the playing sound source
if ((sound->isPlaying()) && (Input::isKeyDown(Input::KEY::KEY_C)))
{
// specify a new sample file
sound->setSampleName("sound_1.mp3");
// reduce the gain
sound->setGain(0.2f);
}As sound has its own thread that updates at 30 FPS, changes won't be applied immediately. However, you can force updating by using the renderWorld() method.
Sound events like play() or stop() aren't updated immediately as well. So, when you need to perform operations that require stopping of the playback (for example, updating the time, from which the sample should be played), you need to force update the sound thread after stopping the playback:
Source code (C++)
// check if the sound sample is playing
if (sound->isPlaying())
{
// stop playing the sample
sound->stop();
// force updating of the sound thread
Sound::renderWorld(1);
// update time
sound->setTime(0.0f);
// play the sample
sound->play();
}See Also
- Playing Sounds on Collisions article to learn how to play sound sources on collisions with physical bodies
- Controlling Sound Sources Globally article to learn how to toggle all sounds at the same time
-
A set of UnigineScript API samples located in the <UnigineSDK>/data/samples/sounds/ folder:
- sound_static_00
- sound_static_01
- sound_static_02
- sound_static_03
- sound_static_04
- sound_stream_00
- Sounds sample in C# Component Samples suite
SoundSource Class
Members
static SoundSourcePtr create ( const char * name, int stream = 0 ) #
Constructor. Creates a new world sound source using a given sound sample file.Arguments
- const char * name - Path to the sound sample file.
- int stream - Positive value to create a streaming source, 0 to create a static source. If the flag is set, the sample will not be fully loaded into memory. Instead, its successive parts will be read one by one into a memory buffer.
void setAirAbsorption ( float absorption ) #
Updates the air absorption value for the sound source that determines the distance-dependent attenuation of the reverberation sound at high frequencies caused by the propagation medium.Arguments
- float absorption - Air absorption value in range [0.0;10.0].
float getAirAbsorption ( ) const#
Returns the current air absorption value for the sound source that determines the distance-dependent attenuation of the reverberation sound at high frequencies caused by the propagation medium.Return value
Air absorption value.void setConeInnerAngle ( float angle ) #
Updates an angle of the inner sound cone. Sound volume in the inner cone does not change. 360 degrees represents an omnidirectional sound source.Arguments
- float angle - Cone inner angle in degrees.
float getConeInnerAngle ( ) const#
Returns the current angle of the inner sound cone. Sound volume in the inner cone does not change.Return value
Cone inner angle in degrees.void setConeOuterAngle ( float angle ) #
Updates an angle of the outer sound cone. When moving to the edge of the outer cone, sound volume is fading up to the gain value outside the oriented cone.Arguments
- float angle - Cone outer angle in degrees.
float getConeOuterAngle ( ) const#
Returns the current angle of the outer sound cone. When moving to the edge of the outer cone, sound volume is fading up to the outside the cone gain value.Return value
Cone outer angle in degrees.void setConeOuterGain ( float gain ) #
Updates the gain controlling the sound intensity outside the oriented cone defined by the outer angle.Arguments
- float gain - Cone outer gain in range [0.0;1.0].
float getConeOuterGain ( ) const#
Returns the current gain controlling the sound intensity outside the oriented cone defined by the outer angle.Return value
Cone outer gain.void setConeOuterGainHF ( float coneoutergainhf ) #
Updates the gain filter value for the sound source that attenuates the reverberation sound at high frequencies outside the oriented cone.Arguments
- float coneoutergainhf - High-frequency reverberation gain value in range [0.0;1.0].
float getConeOuterGainHF ( ) const#
Returns the current gain filter value for the sound source that attenuates the reverberation sound at high frequencies outside the oriented cone.Return value
High-frequency reverberation gain value.void setGain ( float gain ) #
Updates the gain controlling the sound intensity. Setting the value to 0.0 mutes the sound source.Arguments
- float gain - Gain value in range [0.0;1.0].
float getGain ( ) const#
Returns the current gain controlling the sound intensity. Is set to 0, the sound source is muted.Return value
Gain value.float getLength ( ) const#
Returns the total length of the sound sample.Return value
Length of the sample in seconds.void setLoop ( int loop ) #
Updates a value indicating if the sample should be looped.Arguments
- int loop - Positive number to loop the sample, 0 to play it only once.
int getLoop ( ) const#
Returns a value indicating if the sample is looped.Return value
Positive number if the sample is currently looped; otherwise, 0.void setMaxDistance ( float distance ) #
Updates a distance, at which the sound completely fades out, in units.Arguments
- float distance - Distance in units.
float getMaxDistance ( ) const#
Returns a distance, at which the sound completely fades out, in units.Return value
Distance in units.void setMinDistance ( float distance ) #
Updates a distance, at which the sound starts to fade, in units.Arguments
- float distance - Distance in units.
float getMinDistance ( ) const#
Returns a distance, at which the sound starts to fade, in units.Return value
Distance in units.void setOcclusion ( int occlusion ) #
Updates a value indicating if the sound source should be muffled when being occluded.Arguments
- int occlusion - Positive number if the sound should be muffled by occlusion; otherwise, 0.
int getOcclusion ( ) const#
Returns a value indicating if sound source should be muffled when being occluded.Return value
Positive number if the sound is muffled by occlusion; otherwise, 0.void setOcclusionMask ( int mask ) #
Updates the bit mask, that determines which objects occlude the sound source. For a sound to be occluded by an object's surface, at least one bit of this mask should match the occlusion mask of object's surface. Each surface has its own occlusion value, that determines how much it affects sounds in case of occlusion.Notice
Sound occlusion must be enabled.
Arguments
- int mask - Integer, each bit of which is a mask for sound source occlusion.
int getOcclusionMask ( ) const#
Returns the current bit mask that determines which objects occlude the sound source. For a sound to be occluded by an object's surface, at least one bit of this mask should match the occlusion mask of object's surface. Each surface has its own occlusion value, that determines how much it affects sounds in case of occlusion.Notice
Sound occlusion must be enabled.
Return value
Integer, each bit of which is a mask for sound source occlusion.void setPitch ( float pitch ) #
Updates a sound pitch.Arguments
- float pitch - Factor, by which the current pitch will be multiplied in range [0.1;10.0].
float getPitch ( ) const#
Returns the current sound pitch.Return value
Factor, by which the pitch is multiplied.bool isPlaying ( ) const#
Returns a value indicating if the sample is currently being played.Return value
true if the sample is being played; otherwise, false.void setPlayOnEnable ( bool enable ) #
Enables or disables playback start on enabling the sound source.Notice
Playback will begin from the moment it was previously stopped. To enable playback from the beginning use the setRestartOnEnable() method.
Arguments
- bool enable - true to enable playback start on enabling the sound source, false to disable it.
bool isPlayOnEnable ( ) const#
Returns a value indicating if playback is to be started each time the sound source is enabled.Notice
Playback will begin from the moment it was previously stopped. To enable playback from the beginning use the setRestartOnEnable() method.
Return value
true if playback is to be started each time the sound source is enabled; otherwise, false.void setRestartOnEnable ( bool enable ) #
Enables or disables playback restart on enabling the sound source.Arguments
- bool enable - true to enable playback restart on enabling the sound source, false to disable it.
bool isRestartOnEnable ( ) const#
Returns a value indicating if playback is to be restarted from the beginning each time the sound source is enabled.Return value
true if playback is to be restarted from the beginning each time the sound source is enabled; otherwise, false.void setReverbMask ( int mask ) #
Updates the bit mask that determines what reverberation zones can be heard. For sound to reverberate, at least one bit of this mask should match with the player's reverberation mask. At the same time, reverb mask of the reverberation zone should also match with the player's one (but not necessarily in the same bit as this mask matches it).Arguments
- int mask - Integer, each bit of which is a mask for reverberating sound sources.
int getReverbMask ( ) const#
Returns the current bit mask that determines what reverberation zones can be heard. For sound to reverberate, at least one bit of this mask should match with the player's reverberation mask. At the same time, reverb mask of the reverberation zone should also match with the player's one (but not necessarily in the same bit as this mask matches it).Return value
Integer, each bit of which is a mask for reverberating sound sources.void setRoomRolloff ( float rolloff ) #
Updates the scaling room rolloff factor for the sound source that determines attenuation of the reverberation sound over distance.Arguments
- float rolloff - Room rolloff factor in range [0.0; 10.0].
float getRoomRolloff ( ) const#
Returns the current scaling room rolloff factor for the sound source that determines attenuation of the reverberation sound over distance.Return value
Room rolloff factor.void setSampleName ( const char * name ) #
Sets a new sound file for the ambient sound.Arguments
- const char * name - Path to the sound sample file.
const char * getSampleName ( ) const#
Returns the sound sample file of the sound source.Return value
Path to the sound sample file.void setSourceMask ( int mask ) #
Updates a bit mask that determines to what sound channels the source belongs to. For a sound source to be heard, its mask should match with the player's sound mask in at least one bit.Arguments
- int mask - Integer, each bit of which specifies a sound channel.
int getSourceMask ( ) const#
Returns a bit mask that determines to what sound channels the source belongs to. For a sound source to be heard, its mask should match at least with the player's sound mask in at least one bit.Return value
Integer, each bit of which specifies a sound channel.bool isStopped ( ) const#
Returns a value indicating if playback is currently stopped.Return value
true if the sample is stopped; otherwise, false.void setStream ( bool stream ) #
Set a value indicating whether the sound is streamed or not.Arguments
- bool stream - true if the sound is a streamed one; otherwise, false.
bool isStream ( ) const#
Returns a value indicating whether the sound is streamed or not.Return value
true if the sound is a streamed one; otherwise, false.void setTime ( float time ) #
Updates time, from which the sample should be played.Notice
Arguments
- float time - Time in seconds.
float getTime ( ) const#
Returns the current time, at which the sample is being played.Return value
Time in seconds.void play ( ) #
Starts playing the sample.void stop ( ) #
Stops playback. This function doesn't reset the playback position so that playing of the file can be resumed from the same point.Notice
The playback won't stop immediately, as the sound thread is updated at 30 FPS. So, when you need to perform operations that require stopping of the playback (for example, updating the time, from which the sample should be played), you need to force update the sound thread after stopping the playback.
static int type ( ) #
Returns the type of the node.Return value
Sound type identifier.void setAdaptation ( float adaptation ) #
Sets the new adaptation time period for the sound source, during which the volume of the occluded sound gradually changes (fading in and out). This parameter is used to make sounds fade in and out smoothly.Arguments
- float adaptation - Adaptation time to be set, in seconds. 0.0f means instant adaptation.
float getAdaptation ( ) const#
Returns the current adaptation time period for the sound source, during which the volume of the occluded sound gradually changes (fading in and out). This parameter is used to make sounds fade in and out smoothly.Return value
Current adaptation time, in seconds. 0.0f means instant adaptation.Last update:
2024-04-19
Help improve this article
Was this article helpful?
(or select a word/phrase and press Ctrl+Enter)