ObjectMeshCluster Class

ObjectMeshClutter Class

Members

---

ObjectMeshClutter (const char * arg1, int dynamic = 0)

Arguments

• const char * arg1
• int dynamic

void setVisibleDistance (float distance)

Sets the distance up to which meshes scattered by the mesh clutter will be rendered.

Arguments

• float distance - Distance of visibility for meshes in units. If a negative value is provided, 0 will be used instead.

float getSizeX ()

Returns the current width of the mesh clutter along the X-coordinate.

Return value

X-coordinate width in units.

int getIntersection ()

Returns a value indicating whether meshes are scattered upon the ground (along its relief): either the terrain or a mesh set as a parent node.

Return value

1 if intersection is enabled; otherwise, 0.

float getMinScaleMean ()

Returns the scale mean value for meshes in the areas with low density (according to the mask).

Return value

Scale mean value.

const char * getMaskImageName ()

Returns the name of a mask texture (in R8 format) that defines the placement of meshes.

Return value

Name (path) of the mask texture.

float getFadeDistance ()

Returns the current distance up to which meshes scattered by the mesh clutter are fading out (that is, fewer meshes will be rendered instead of all). The distance is measured starting from the visible distance.

Return value

Distance of nodes fading in units.

void setMaskFlipX (int maskflipx)

Flip the mask by X axis.

Arguments

• int maskflipx - Positive value to flip the mask; otherwise, 0.

const char * getSurfaceTargetName (int surface, int target)

Returns the name of a given surface target.

Arguments

• int surface - Surface number.
• int target - Target number.

Return value

Target name.

float getVisibleDistance ()

Returns the current distance up to which meshes scattered by the mesh clutter are rendered.

Return value

Distance of visibility for meshes in units.

void setSeed (int seed)

Sets the seed for pseudo-random positioning of meshes.

Arguments

• int seed - Number used to initialize a pseudo-random sequence. If a negative value is provided, 0 will be used instead.

float getAngle ()

Returns the current angle cosine that defines the slope steepness appropriate for positioning meshes.

Return value

Slope angle cosine.

void setMaskInverse (int inverse)

Specifies if clutter meshes should be rendered inside or outside the mask mesh contour.

Arguments

• int inverse - 0 to render clutter meshes inside the mask mesh contour; 1 to render them outside.

void setStep (float step)

Sets the step for cells used to render mesh clutter.

Arguments

• float step - Step for clutter cells in units.

void setMaskFlipY (int maskflipy)

Flip the mask by Y axis.

Arguments

• int maskflipy - Positive value to flip the mask; otherwise, 0.

void setDensity (float density)

Sets the density factor that defines the number of meshes per square unit.

Arguments

• float density - Density factor. If a negative value is provided, 0 will be used instead.

void setMaskMinValue (int value)

Sets the minimum value of the mask application range.

Arguments

• int value - Minimum mask value, [0;255].

void flushMesh ()

Flushes the mesh geometry into the video memory.

void setOrientation (int orientation)

Sets a value indicating whether meshes should be oriented along the normals of the ground (either the terrain or a mesh set as a parent node).

Arguments

• int orientation - Positive number to enable orientation; 0 to disable.

float getDensity ()

Returns the current density factor that defines the number of meshes per square unit.

Return value

Density factor.

const char * getMaskMeshName ()

Returns the current mesh to used as a mask for the mesh clutter. This mesh should be plane.

Return value

Path to the *.mesh file.

void setIntersection (int intersection)

Sets a value indicating whether meshes should be scattered upon the ground (along its relief): either the terrain or a mesh set as a parent node.

Arguments

• int intersection - Positive number to enable intersection; 0 to disable.

int setMaskImage (const Ptr<Image> & image)

Sets an image (in R8 format) that defines placement of meshes.

Arguments

• const Ptr<Image> & image - Image smart pointer.

Return value

1 if the mask image is successfully set; otherwise, 0.

void setMaskImageName (const char * name)

Sets the name of a mask texture (in R8 format) that defines the placement of meshes.

Arguments

• const char * name - Name (path) of the mask texture.

int findSurfaceTarget (const char * name, int surface)

Searches for a surface target with a given name.

Arguments

• const char * name - Target name.
• int surface - Surface number.

Return value

Target number if it exists; otherwise, -1.

int getMaskInverse ()

Returns a flag indicating if clutter meshes are rendered inside or outside the mask mesh contour.

Return value

0 if clutter meshes are rendered inside the mask mesh contour; 1 if outside.

void setMaskMeshName (const char * name)

Sets a mesh to be used as a mask for the mesh clutter. This mesh should be plane.

Arguments

• const char * name - Path to the *.mesh file.

int getSeed ()

Returns the seed used for pseudo-random positioning of meshes.

Return value

Number used to initialize a pseudo-random sequence.

void setRotation (const Math::vec3 & mean, const Math::vec3 & spread)

Sets the rotation of meshes along X, Y and Z axes.

Arguments

• const Math::vec3 & mean - Mean values of rotation angles in degrees.
• const Math::vec3 & spread - Spread values of rotation angles in degrees.

float getMinScaleSpread ()

Returns the scale spread value that controls the range of mesh scales in the areas with low density (according to the mask).

Return value

Scale spread value.

float getOffsetMean ()

Returns the current mean value of the vertical offset that determines the placement of meshes above or below the surface.

Return value

Mean value of the offset in units.

void setSizeX (float sizex)

Sets the width of the mesh clutter along the X-coordinate.

Arguments

• float sizex - X-coordinate width in units. If a negative value is provided, 0 will be used instead.

float getSizeY ()

Returns the current length of the mesh clutter along the Y-coordinate.

Return value

Y-coordinate length in units.

Math::vec3 getRotationSpread ()

Returns the spread value of meshes rotation along X, Y and Z axes.

Return value

Spread values of rotation angles in degrees.

float getStep ()

Returns the step for cells used to render meshes scattered by the mesh clutter.

Return value

Step for clutter cells in units.

int setMesh (const Ptr<Mesh> & mesh)

Copies the source mesh into the current mesh.

Arguments

• const Ptr<Mesh> & mesh - The source mesh to be copied.

Return value

1 if the mesh is copied successfully; otherwise, 0.

void setMaxScale (float mean, float spread)

Sets the scale for meshes in the areas with high density (according to the mask). With the minimum scale it is possible to automatically render, for example, big trees in the center of the forest. A spread value allows you to control the range of scales relative to the mean value.

Arguments

• float mean - Scale mean value.
• float spread - Maximum spread value to randomly upscale or downscale objects.

void setShadowRadius (float radius)

Sets the distance to draw additional meshes outside the view frustum. This option allows you to eliminate popping of shadows at the edges of the screen when the camera is turning.

Arguments

• float radius - Distance in units. If a negative value is provided, 0 will be used instead.

int saveMesh (const char * name)

Saves the mesh into a file.

Arguments

• const char * name - Path to the mesh file.

Return value

1 if the mesh is saved successfully; otherwise, 0.

float getThreshold ()

Returns the current density threshold (for a mask) starting from which meshes are rendered if placed dense enough.

Return value

Density threshold.

int getMaskMesh (const Ptr<Mesh> & mesh)

Arguments

• const Ptr<Mesh> & mesh

Return value

int getMaskMaxValue ()

Returns the maximum value of the mask application range.

Return value

Maximum mask value.

float getOffsetSpread ()

Returns the current spread value of the vertical offset that determines the placement of meshes above or below the surface.

Return value

Spread value of the offset in units.

void setMeshName (const char * name)

Sets a name for the mesh scattered by the mesh clutter.

Arguments

• const char * name - Name to be set for the mesh.

void setFadeDistance (float distance)

Sets the distance up to which meshes scattered by the mesh clutter will be fading out (that is, fewer meshes will be rendered instead of all). The distance is measured starting from the visible distance.

Arguments

• float distance - Distance of fading for meshes in units. If a negative value is provided, 0 will be used instead.

void setOffset (float mean, float spread)

Sets the vertical offset that determines the placement of meshes above or below the surface.

Arguments

• float mean - Mean value of the offset in units.
• float spread - Spread value of the offset in units.

void setMinScale (float mean, float spread)

Sets the scale for meshes in the areas with low density (according to the mask). With the minimum scale it is possible to automatically render, for example, small trees at the forest border. A spread value allows you to control the range of scales relative to the mean value.

Arguments

• float mean - Scale mean value.
• float spread - Maximum spread value to randomly upscale or downscale objects.

int getNumSurfaceTargets (int surface)

Returns the total number of surface targets.

Arguments

• int surface - Surface number.

Return value

Total number of surface targets.

Math::vec3 getRotationMean ()

Returns the mean value of meshes rotation along X, Y and Z axes.

Return value

Mean values of rotation angles in degrees.

int getMesh (const Ptr<Mesh> & mesh)

Copies the current mesh into the source mesh.

Arguments

• const Ptr<Mesh> & mesh - The source mesh.

Return value

1 if the mesh is copied successfully; otherwise, 0.

int getMaskFlipY ()

Returns a flag indicating if a mask is flipped by Y axis.

Return value

Positive value if the mask is flipped; otherwise, 0.

void setThreshold (float threshold)

Sets the density threshold (for a mask) starting from which meshes are rendered if placed dense enough.

Arguments

• float threshold - Density threshold. The provided value will be clipped in range [0;1].

int getMaskMinValue ()

Returns the minimum value of the mask application range.

Return value

Minimum mask value.

void setAngle (float angle)

Sets the angle cosine that defines the slope steepness appropriate for positioning meshes.

Arguments

• float angle - Slope angle cosine. The provided value will be clipped in range [0;1].

int createMesh (const char * name, int dynamic = 0)

Creates the clutter mesh with the specified parameters.

Arguments

• const char * name - Path to the mesh file.
• int dynamic - Dynamic flag:
  • 0 - If the mesh vertices are changed in run-time, meshes loaded from the same file will be also changed.
  • 1 - If the mesh vertices are changed in run-time, meshes loaded from the same file won't be changed

Return value

1 if the mesh is created successfully; otherwise, 0.

int getCollision ()

Returns a value indicating if collisions with the object should be taken into account.

Return value

1 if collisions are taken into account; 0 if collisions are allowed only with already generated geometry.

int getSpawnCount ()

Returns the number of cells to be generated.

Return value

Number of cells to be generated if the scene generation is not completed; otherwise, 0.

float getMaxScaleMean ()

Returns the scale mean value for meshes in the areas with high density (according to the mask).

Return value

Scale mean value.

const char * getMeshName ()

Returns the name of the mesh scattered by mesh clutter.

Return value

Mesh name.

void setMaskMaxValue (int value)

Sets the maximum value of the mask application range.

Arguments

• int value - Maximum mask value, [0;255].

void setSizeY (float sizey)

Sets the length of the mesh clutter along the Y-coordinate.

Arguments

• float sizey - Y-coordinate length in units. If a negative value is provided, 0 will be used instead.

int getMaskImage (const Ptr<Image> & image)

Writes the image that is currently used as a mask for placement of meshes into the given buffer.

Arguments

• const Ptr<Image> & image - Image smart pointer.

Return value

1 if the mask image is successfully written into the buffer; otherwise, 0.

int loadMesh (const char * name)

Loads a new mesh instead of the current mesh from the .mesh file. This function doesn't change the mesh name.

Arguments

• const char * name - Path to the mesh file.

Return value

1 if the mesh is loaded successfully; otherwise, 0.

float getShadowRadius ()

Returns the current distance to draw additional meshes outside the view frustum. This option allows you to eliminate popping of shadows at the edges of the screen when the camera is turning.

Return value

Distance in units.

float getMaxScaleSpread ()

Returns the scale spread value that controls the range of mesh scales in the areas with high density (according to the mask).

Return value

Scale spread value.

void setCollision (int collision)

Sets a value indicating if collisions with the object should be taken into account.

Arguments

• int collision - 1 to take collisions into account and make the object important for physics; 0 to allow collisions only with already generated geometry.

int getMaskFlipX ()

Returns a flag indicating if a mask is flipped by X axis.

Return value

Positive value if the mask is flipped; otherwise, 0.

int getOrientation ()

Returns a value indicating whether meshes are oriented along the normals of the ground (either the terrain or a mesh set as a parent node).

Return value

1 if orientation is enabled; otherwise, 0.

int setMaskMesh (const Ptr<Mesh> & mesh)

Arguments

• const Ptr<Mesh> & mesh

Return value