CigiSensorControl Class
Warning
The functionality described in this article is not available in the Community SDK edition.
You should upgrade to- Sim
SDK edition to use it.
You should upgrade to
| Header: | #include <UnigineCIGIConnector.h> |
CigiSensorControl Class
Members
int getViewID ( ) #
Returns the view ID specified in the packet.Return value
View ID.int getSensorID ( ) #
Returns the sensor ID specified in the packet.Return value
Sensor ID.int getSensorEnabled ( ) #
Returns the value of the Sensor On/Off parameter specified in the packet.Return value
Sensor On/Off parameter value: 1 if the sensor is on; otherwise, 0.int getPolarity ( ) #
Returns the value of the Polarity parameter specified in the packet. Determines whether the sensor shows white hot or black hot.Return value
Polarity parameter value. The following values are supported:- 0 - White hot
- 1 - Red hot
int getDropoutEnabled ( ) #
Returns the value of the Line-by-Line Dropout Enable parameter specified in the packet. This effect is meant to simulate the horizontal stripes caused by a transient loss of video information.Return value
Line-by-Line Dropout Enable parameter value: 1 if line-by-line dropout is enabled; otherwise, 0.int getAutomaticGain ( ) #
Returns the value of the Automatic Gain parameter specified in the packet.Return value
Automatic Gain parameter value: 1 if the sensor automatically adjusts the gain value to optimize the brightness and contrast of the sensor display; otherwise, 0.int getTrackColor ( ) #
Returns the value of the Track White/Black parameter specified in the packet.Return value
Track White/Black parameter value: 1 - if the sensor tracks black; 0 - if the sensor tracks white.int getTrackMode ( ) #
Returns the value of the Track Mode parameter specified in the packet. Determines which track mode the sensor will use.Return value
Track Mode parameter value. The following values are supported:- 0 - Off
- 1 - Force Correlate. Tracking behavior shall be similar to that found in a Maverick missile.
- 2 - Scene. Tracking behavior shall be similar to that found in a FLIR (Forward Looking Infrared).
- 3 - Target. Contrast tracking shall be used to lock to a specific target area.
- 4 - Ship. Contrast tracking shall be used, with adjustment of the tracking point so that the weapon strikes close to the water line.
- 5-7 - Defined by IG
int getResponse ( ) #
Returns the value of the Response Type parameter specified in the packet.Return value
Response Type parameter value: 1 - Extended (gate and target position), the IG will return a Sensor Extended Response packet; 0 - Normal (gate position), the IG will return a Sensor Response packet.Notice
The IG shall return one of the two sensor response packets every frame as long as the following two criteria are met:
- Sensor On/Off is set to On (1).
- Track Mode is not set to Off (0).
float getGain ( ) #
Returns the value of the Gain parameter specified in the packet. Determines the contrast of the sensor display.Return value
Gain parameter value in the [0.0; 1.0] range.float getLevel ( ) #
Returns the value of the Level parameter specified in the packet. Determines the brightness of the sensor display.Return value
Level parameter value in the [0.0; 1.0] range.float getCoupling ( ) #
Returns the value of the AC Coupling parameter specified in the packet. Determines the AC coupling decay constant for the sensor display.Return value
AC Coupling parameter value.float getNoise ( ) #
Returns the value of the Noise parameter specified in the packet. Determines the amount of detector noise for the sensor.Return value
Noise parameter value in the [0.0; 1.0] range.Last update:
2020-11-24
Help improve this article
Was this article helpful?
(or select a word/phrase and press Ctrl+Enter)