Generating Vector Objects

Fences, pipes and other such objects are placed along line segments selected from vector data sources (*.shp files).

The basic workflow is as follows:

First, we create a basic object, that will be used as a building block for generation - any *.node file containing a single root-node with any hierarchy.

This step is the same as Adding a Vector Data Source and Specifying Tags for Spline objects.

Now, we must add basic objects created at the first step and bind them to the tags created at the second step.

1. In the Cultural Layer panel, select Vector (Fences, Pipelines, etc.) and the following settings will be displayed in the Parameters panel.

   

2. Add a basic object for generation by clicking Add button at the top of the Parameters panel and specify object's name. You can add as many objects as nesessary.

3. For each basic object specify the following parameters:

   

   Tag	The tag to be used for the selected basic object from the list of the tags specified at the second step.
   Node	The path to the basic object's *.node file.
   Autosize	Enables or disables autosize mode for node placement. When this mode is enabled, basic objects are placed with zero-spacing so that bounding boxes of the first and the last basic objects are aligned with start and end points of the line segment respectively.
   Fit to size	Enables stretching/shrinking of basic objects so that they are placed along line segments without spaces between them. Notice Available only when autosize mode is disabled.
   Step	Distance between two adjacent basic objects, in units. Notice Available only when autosize mode is disabled.
   Start offset	Offset of the first basic object's pivot from the start point of the line segment, in units. Notice Available only when autosize mode is disabled.
   End offset	Offset of the last basic object's pivot from the end point of the line segment, in units. Notice Available only when autosize mode is disabled.
   Collider	Flag indicating if collisions for the generated object are to be detected. Notice Available only for geometry type.
   Drop to ground	Flag indicating if the generated object will be aligned with the terrain surface.
   Height offset	Distance from the terrain surface along the Z-axis, in units. Notice If you see the generated object partially, You can try to increase this value to lift it above the terrain surface.
   Forward axis	Axis along which the basic object is to be tiled: X, -X, Y, -Y.

4. Now all necessary basic objects are specified and bound to tags.

   Notice

   If the terrain is already generated and you want to add only vector objects - proceed to Step 4.

   Otherwise - return back to setting other parameters of terrain generation.

Now you can generate vector objects by clicking Generate button and selecting Vector objects option in the Generation Steps window, in this case only vector objects will be generated.

You can also place billboards along the line segments selected from vector data sources.

This option can be used, for example, to simulate lights along the generated roads. The basic workflow is the same as described above with the following additions:

• At Step 1 you should use a *.node file containing a single Billboards object as the basic object. The Billboards object should contain a single billboard and have an emissive material assigned to its surface.
  Notice

  If a *.node file contains several billboards, only the settings of the first one will be used.
• Step 2 can be skipped, as you will use the same tag as for generated roads along which the lights are to be placed.

• At Step 3 when specifying parameters you should do the following:

  In the Tag field you should select the same tag as for generated roads along which the lights are to be placed. Disable the Autosize option Set the value for the Step parameter that determines the distance (in units) between the two adjacent lights (billboards) placed along the road. You will have an extra parameter available - Split Billboards length (km). This parameter allows you to control the number of Billboards objects that will be generated due to area splitting: low values will increase the number of generated Billboards objects high values will reduce this number Notice The maximum number of billboards contained in a single Billboards object is limited to 8000. Thus, the number of generated Billboards objects is also affected by the Step value, that you specify, since a low value produces a large total number of billboards. Although billboards are performance-friendly, generating too many of them may reduce preformance.