Unigine::BootConfig Class

BootConfig Class

Members

---

void setPath ( const char * path ) #

Sets a new path to the startup configuration file (default: data/configs/default.boot).

Arguments

• const char * path - New path to the startup configuration file to be set.

const char * getPath ( ) const#

Returns the current path to the startup configuration file (default: data/configs/default.boot).

Return value

Current path to the startup configuration file.

void setAutosave ( bool autosave ) #

Sets a value indicating if current startup configuration settings are automatically saved to the corresponding config file on loading, closing, and saving the world, as well as on the Engine shutdown.

Arguments

• bool autosave - true to enable automatic saving of current startup configuration settings; false — to disable it.

bool isAutosave ( ) const#

Returns a value indicating if current startup configuration settings are automatically saved to the corresponding config file on loading, closing, and saving the world, as well as on the Engine shutdown.

Return value

true if automatic saving of current Engine configuration settings is enabled; otherwise, 0.

bool load ( ) #

Loads Engine startup configuration from the file. To change the path to the configuration file use the setPath() method.

Return value

true if the config is successfully loaded from the file; otherwise, false.

bool save ( ) const#

Saves the current Engine startup configuration to the file. To change the path to the configuration file use the setPath() method.

Return value

true if the current configuration is successfully saved to the file; otherwise, false.

void reset ( ) #

Resets the settings in the Engine startup configuration file to the default.

void setGuiPath ( const char * path ) #

Sets a path to a GUI skin to be used for the engine interface. The path can be specified as an absolute path or relatively to the data folder.

Arguments

• const char * path - Path to a GUI skin to be used for the Engine interface (absolute path or path relative to the data folder).

const char * getGuiPath ( ) const#

Returns a path to a GUI skin currently used for the Engine interface. The path can be specified as absolute or relatively to the data folder.

Return value

Path to a GUI skin currently used for the Engine interface (absolute path or path relative to the data folder).

void setEngineLog ( const char * log ) #

Sets a log file (in txt format) to be created and used by the Engine. The path can be absolute or relative to the binary executable. For relative paths, if the Project Name startup parameter is set, the log file with the specified name will be created in the corresponding directory in the User profile (only the name will be used, the remaining part of the relative path will be discarded).

Arguments

• const char * log - Log file (in txt format) to be used by the Engine.

const char * getEngineLog ( ) const#

Returns a log file (in txt format) currently used by the Engine. The path can be absolute or relative to the binary executable. For relative paths, if the Project Name startup parameter is set, the log file with the specified name will be created in the corresponding directory in the User profile (only the name will be used, the remaining part of the relative path will be discarded).

Return value

Log file (in txt format) currently used by the Engine.

void setSystemScript ( const char * script ) #

Sets a new path to the system script (corresponds to the system_script element of the .boot configuration file).

Arguments

• const char * script - Path to the system script (specified relative to the data folder).

const char * getSystemScript ( ) const#

Returns the path to the system script (corresponds to the system_script element of the .boot configuration file).

Return value

Path to the system script (specified relative to the data folder).

void setEditorScript ( const char * script ) #

Sets a new path to the editor script (corresponds to the system_script element of the .boot configuration file).

Arguments

• const char * script - Path to the editor script (specified relative to the data folder).

const char * getEditorScript ( ) const#

Returns the path to the editor script (corresponds to the system_script element of the .boot configuration file).

Return value

Path to the editor script (specified relative to the data folder).

void setCachePath ( const char * path ) #

Sets a new path to store system and Editor cache files(corresponds to the cache_path element of the .boot configuration file).

Arguments

• const char * path - Path to store system and Editor cache files. Can be an absolute path or a relative path to the data path.

const char * getCachePath ( ) const#

Returns the current path to store system and Editor cache files(corresponds to the cache_path element of the .boot configuration file).

Return value

Path to store system and Editor cache files. Can be an absolute path or a relative path to the data path.

void setEditorCache ( const char * cache ) #

Sets a new path to a cache file to be used by the UnigineEditor (corresponds to the editor_cache element of the .boot configuration file).

Arguments

• const char * cache - Path to a cache file to be used by the UnigineEditor. Can be an absolute path or a path relative to the data path, or to the cache path (if any).

const char * getEditorCache ( ) const#

Returns the path to a cache file currently used by the UnigineEditor (corresponds to the editor_cache element of the .boot configuration file).

Return value

Path to a cache file to be used by the UnigineEditor. Can be an absolute path or a path relative to the data path, or to the cache path (if any).

void setSystemCache ( const char * cache ) #

Sets a new path to a cache file to be used by the Engine (corresponds to the system_cache element of the .boot configuration file).

Arguments

• const char * cache - Path to a cache file currently used by the Engine. Can be an absolute path or a path relative to the data path, or to the cache path (if any).

const char * getSystemCache ( ) const#

Returns the current path to a cache file to be used by the Engine (corresponds to the system_cache element of the .boot configuration file).

Return value

Path to a cache file currently used by the Engine. Can be an absolute path or a path relative to the data path, or to the cache path (if any).

void setVideoApp ( const char * app ) #

Sets a new graphics API to be used for rendering. (corresponds to the video_app element of the .boot configuration file).

Arguments

• const char * app - Graphics API used for rendering: null, auto, dx, or gl.

const char * getVideoApp ( ) const#

Returns the graphics API currently used for rendering (corresponds to the video_app element of the .boot configuration file).

Return value

Graphics API used for rendering: null, auto, dx, or gl.

void setSoundApp ( const char * app ) #

Sets a new sound API to be used (corresponds to the sound_app element of the .boot configuration file).

Arguments

• const char * app - Sound API used for rendering: nosound, auto, or openal.

const char * getSoundApp ( ) const#

Returns the sound API currently used (corresponds to the sound_app element of the .boot configuration file).

Return value

Sound API used for rendering: nosound, auto, or openal.

void setExternDefine ( const char * defines ) #

Sets extern define(s) to be used at the Engine startup (corresponds to the extern_define element of the .boot configuration file).

Arguments

• const char * defines - External definition(s) to be used. Several definitions are comma separated (no whitespaces). Definitions can be specified as follows:
  • DEFINITION_NAME
  • DEFINITION_NAME=VALUE
  • DEFINITION_NAME_1,DEFINITION_NAME_2,
    DEFINITION_NAME_3=VALUE,...,DEFINITION_NAME_N

const char * getExternDefine ( ) const#

Returns extern define(s) currently used at the Engine startup (corresponds to the extern_define element of the .boot configuration file).

Return value

External definition(s) to be used. Several definitions are comma separated (no whitespaces). Definitions can be specified as follows:

• DEFINITION_NAME
• DEFINITION_NAME=VALUE
• DEFINITION_NAME_1,DEFINITION_NAME_2,
  DEFINITION_NAME_3=VALUE,...,DEFINITION_NAME_N

void setConsoleCommand ( const char * command ) #

Sets a new Console command(s) to be used at the Engine startup (corresponds to the console_command element of the .boot configuration file).

Arguments

• const char * command - Console command(s) to be used at the engine startup. Several commands can be separated using the && sequence.

const char * getConsoleCommand ( ) const#

Returns Console command(s) currently used at the Engine startup (corresponds to the console_command element of the .boot configuration file).

Return value

Console command(s) currently used at the Engine startup. Several commands can be separated using the && sequence.

int getNumPluginPaths ( ) const#

Returns the number of directory(ies) containing plugins to be automatically loaded at the Engine startup. These directories are specified in the .boot configuration file via the plugin_path element. The list of these plugin paths can be obtained via the getNumPluginPaths() and getPluginPath(int num) methods. The order of loading plugins matters, you can rearrange the paths via swapPluginPath()

Return value

Current number of plugin directories.

void removePluginPath ( int num ) #

Removes a plugin path with the specified number from the list of the plugin paths specified in the .boot configuration file via the plugin_path element. A plugin path is a directory containing plugins to be automatically loaded at the Engine startup.

Arguments

• int num - Number of the plugin path to be removed from the list of the specified plugin paths, in the range from 0 to the total number of plugin paths specified.

void swapPluginPath ( int num0, int num1 ) #

Swaps two plugin paths with the given numbers specified in the .boot configuration file. A plugin path is a directory containing plugins to be automatically loaded at the Engine startup. The list of these plugin paths can be obtained via the getNumPluginPaths() and getPluginPath(int num) methods. The order of loading plugins matters, you can rearrange the paths via swapPluginPath()

Arguments

• int num0 - Number of the first plugin path in the list of the specified plugin paths to be swapped, in the range from 0 to the total number of plugin paths specified.
• int num1 - Number of the second plugin path in the list of the specified plugin paths to be swapped, in the range from 0 to the total number of plugin paths specified.

const char * getPluginPath ( int num ) #

Returns a plugin path with the given number specified in the .boot configuration file via the plugin_path element. A plugin path is a directory containing plugins to be automatically loaded at the Engine startup. The order of loading plugins matters, you can rearrange the paths via swapPluginPath().

Arguments

• int num - Plugin path number in the list of the specified plugin paths, in the range from 0 to the total number of plugin paths specified.

Return value

Path to the plugins directory with the given number in the list of the plugin paths. Сan be absolute or specified relatively to the binary executable.

void setPluginPath ( int num, const char * value ) #

Sets a new path for the item of the list of the plugin paths with the given number specified in the .boot configuration file via the plugin_path element. A plugin path is a directory containing plugins to be automatically loaded at the Engine startup. The order of loading plugins matters, you can rearrange the paths via swapPluginPath().

Arguments

• int num - Plugin path number in the list of the specified plugin paths.
• const char * value - New path to be set for the specified item of the list of the plugin paths. Сan be specified relatively to the binary executable or as an absolute path.

int getNumExternPlugins ( ) const#

Returns the number of plugin libraries to be automatically loaded at the Engine startup. These plugins are specified in the .boot configuration file via the extern_plugin element. The list of these plugin paths can be obtained via the getNumExternPlugins() and getExternPlugin(int num) methods. The order of loading plugins matters, you can rearrange them via swapPluginPath().

Return value

Current number of plugin libraries to be loaded at the Engine startup.

void removeExternPlugin ( int num ) #

Removes a plugin with the specified number from the list of the plugins specified in the .boot configuration file via the extern_plugin element.

Arguments

• int num - Number of the plugin to be removed from the list of the specified plugins, in the range from 0 to the total number of plugins specified.

void swapExternPlugin ( int num0, int num1 ) #

Swaps two plugins with the given numbers specified in the .boot configuration file. The list of these plugins can be obtained via the getNumExternPlugins() and getExternPlugin(int num) methods. The order of loading plugins matters, this method enables you to rearrange plugins to change loading order.

Arguments

• int num0 - Number of the first plugin in the list of the specified plugins to be swapped, in the range from 0 to the total number of plugins specified.
• int num1 - Number of the second plugin in the list of the specified plugins to be swapped, in the range from 0 to the total number of plugins specified.

const char * getExternPlugin ( int num ) #

Returns the name of the plugin with the given number specified in the .boot configuration file via the extern_plugin element. The order of loading plugins matters, you can rearrange the paths via swapExternPlugin().

Arguments

• int num - Number of the plugin in the list of the specified plugins, in the range from 0 to the total number of plugins specified.

Return value

Name of the plugin with the given number specified in the .boot configuration file. Plugin library name goes without any prefixes and postfixes (e.g., libNetwork_x64d.so is listed as "Network").

void setExternPlugin ( int num, const char * value ) #

Sets a new name of the plugin with the given number specified in the .boot configuration file via the extern_plugin element. The order of loading plugins matters, you can rearrange the paths via swapExternPlugin().

Arguments

• int num - Number of the plugin to be set in the list of the specified plugins, in the range from 0 to the total number of plugins specified.
• const char * value - Name of the plugin with the given number specified in the .boot configuration file. Plugin library name goes without any prefixes and postfixes (e.g., libNetwork_x64d.so is listed as "Network").

void setScreenWidth ( int width = 860 ) #

Sets the width of the boot screen window, in pixels.

Arguments

• int width - Width of the boot screen window, in pixels.

int getScreenWidth ( ) const#

Returns the current width of the boot screen window.

Return value

Current width of the boot screen window, in pixels.

void setScreenHeight ( int height = 560 ) #

Sets the height of the boot screen window, in pixels.

Arguments

• int height - Height of the boot screen window, in pixels.

int getScreenHeight ( ) const#

Returns the height of the boot screen window, in pixels.

Return value

Current height of the boot screen window, in pixels.

void setScreenBackgroundColor ( const Math::vec4 & color ) #

Sets the background color of the screen. The default value is vec4_zero.

Arguments

• const Math::vec4 & color - Background color defined by a vector of four numbers in the [0; 1] range.

Math::vec4 getScreenBackgroundColor ( ) const#

Returns the current background color of the screen.

Return value

Background color defined by a vector of four numbers in the [0; 1] range.

void setScreenTransform ( const Math::vec4 & transform ) #

Sets the transformation of the boot screen texture. The default value is vec4(1.0f, 1.0f, 0.5f, 0.5f).

Arguments

• const Math::vec4 & transform - Transformation of the screen defined by a vector of four numbers in the [0; 1] range:
  1. Texture size multiplier
  2. Window size multiplier
  3. Horizontal position
  4. Vertical position

Math::vec4 getScreenTransform ( ) const#

Returns the current transformation of the boot screen texture.

Return value

Transformation of the screen defined by a vector of four numbers in the [0; 1] range:

1. Texture size multiplier
2. Window size multiplier
3. Horizontal position
4. Vertical position

void setScreenThreshold ( int threshold = 16 ) #

Sets the threshold for blending based on the alpha-channel.

Arguments

• int threshold - Threshold for blending based on the alpha-channel.

int getScreenThreshold ( ) const#

Returns the current threshold for blending based on the alpha-channel.

Return value

Threshold for blending based on the alpha-channel.

void setScreenTexture ( const char * texture ) #

Sets the path to the boot screen texture.

Arguments

• const char * texture - Path to the boot screen texture.

const char * getScreenTexture ( ) const#

Returns the current path to the boot screen texture.

Return value

Path to the boot screen texture.

void setScreenFont ( const char * font ) #

Sets the path to the font for text rendering.

Arguments

• const char * font - Path to the font for text rendering.

const char * getScreenFont ( ) const#

Returns the current path to the font for text rendering.

Return value

Path to the font for text rendering.

void setScreenText ( const char * text ) #

Sets the text of the boot screen.

Arguments

• const char * text - Text of the boot screen.

const char * getScreenText ( ) const#

Returns the current text of the boot screen.

Return value

Text of the boot screen.

void setScreenMessageEngineInit ( const char * init ) #

Sets the message to be displayed on the engine initialization.

Arguments

• const char * init - Message on the engine initialization.

const char * getScreenMessageEngineInit ( ) const#

Returns the message currently displayed on the engine initialization.

Return value

Message on the engine initialization.

void setScreenMessageFileSystemInit ( const char * init ) #

Sets the message to be displayed on the file system initialization.

Arguments

• const char * init - Message for file system initialization.

const char * getScreenMessageFileSystemInit ( ) const#

Returns the message currently displayed on the file system initialization.

Return value

Message for file system initialization.

void setScreenMessageMaterialsInit ( const char * init ) #

Sets the message to be displayed on materials initialization.

Arguments

• const char * init - Message for materials initialization.

const char * getScreenMessageMaterialsInit ( ) const#

Returns the message currently displayed on materials initialization.

Return value

Message for materials initialization.

void setScreenMessagePropertiesInit ( const char * init ) #

Sets the message to be displayed on properties initialization.

Arguments

• const char * init - Message for properties initialization.

const char * getScreenMessagePropertiesInit ( ) const#

Returns the message currently displayed on properties initialization.

Return value

Message for properties initialization.

void setScreenMessagePluginsInit ( const char * init ) #

Sets the message to be displayed on the plugins initialization.

Arguments

• const char * init - Message for plugins initialization.

const char * getScreenMessagePluginsInit ( ) const#

Returns the message currently displayed on plugins initialization.

Return value

Message for plugins initialization.

void setScreenMessageShadersCompilation ( const char * compilation ) #

Sets the message to be displayed on shaders compilation.

Arguments

• const char * compilation - Message for shaders compilation.

const char * getScreenMessageShadersCompilation ( ) const#

Returns the message currently displayed on shaders compilation.

Return value

Message for shaders compilation.