Unigine::Plugins::Syncker::Manager Class
| Header: | #include <plugins/Unigine/Syncker/UnigineSyncker.h> |
Notice
Syncker plugin must be loaded.
This class represents Syncker manager interface used to initialize and destroy Syncker in master and slave applications.
Manager Class
Members
bool getArgIsMaster ( ) #
Returns a value indicating if the command line argument "-sync_master" equals to 1.Return value
true if the command line argument "-sync_master" equals to 1; otherwise, false.bool getArgInitSyncker ( ) const#
Returns a value indicating if the command line argument "-sync_init" equals to 1.int getArgUdpPort ( ) #
Returns the UDP port value set by the command line argument "-sync_port".Return value
UDP port number. The default value is 8890.Syncker::ADDRESSING_METHOD getArgAddressingMethod ( ) #
Returns the addressing mode value set by the command line argument "-sync_method".Return value
Current addressing mode: one of the ADDRESSING_METHOD enum values.Syncker::SWAP_SYNC_MODE getArgSwapSyncMode ( ) const#
Returns the swap synchronization mode set by the command line argument "-sync_swap".int getArgPeersCount ( ) #
Returns the number of peers set by the command line argument "-sync_count".Return value
Number of peers. The default value is 1. The number of peers includes all Slaves in the network + the Master.const char * getArgBroadcastAddress ( ) #
Returns the broadcast address of the Master set by the command line argument "-sync_broadcast_address".Return value
Broadcast address of the Master.const char * getArgMulticastAddress ( ) #
Returns the multicast address of the Master set by the command line argument "-sync_multicast_address".Return value
Multicast address of the Master. The default value is 239.0.0.1const char * getArgMasterAddress ( ) #
Returns the IP address of the Master set by the command line argument "-sync_master_address".Notice
Available for Slave only.
Return value
IP address of the Master.int getArgUdpSlavePort ( ) #
Returns the UDP port used by the Slave set by the command line argument "-sync_slave_port".Notice
Available for Slave only.
Return value
UDP port used by the Slave. The default value is 0 (any unused port available).bool getArgAllowExtraSlaves ( ) #
Returns the value indicating if additional Slaves can be connected after starting the session set by the command line argument "-sync_allow_extra_slaves".Notice
Available for Slave only.
Return value
true if additional Slaves can be connected after starting the session; otherwise, false.Master * initMaster ( ) #
Initializes the Syncker as the Master application using values specified via the command-line arguments.Return value
Pointer to the Master interface.Master * initMasterBroadcast ( int peers_count, const char * broadcast_address, unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #
Initializes the Syncker as the Master application with the broadcast mode enabled.Notice
Slaves must be initialized with broadcast mode enabled as well.
Arguments
- int peers_count - Total number of Syncker hosts in the network (including the Master itself). Similar to specifying the -sync_count command-line argument.
- const char * broadcast_address - Broadcast address to be used. Similar to specifying the -sync_broadcast_address command-line argument.
- unsigned short udp_port - Broadcast address to be used. Similar to specifying the -sync_broadcast_address command-line argument.
- Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.
Return value
Pointer to the Master interface.Master * initMasterMulticast ( int peers_count, const char * multicast_address, unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #
Initializes the Syncker as the Master application with the multicast mode enabled.Arguments
- int peers_count - Total number of Syncker hosts in the network (including the Master itself). Similar to specifying the -sync_count command-line argument.
- const char * multicast_address - Multicast address to be used. Similar to specifying the -sync_multicast_address command-line argument.
- unsigned short udp_port - UDP port to be used. Similar to specifying the -sync_port command-line argument.
- Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.
Return value
Pointer to the Master interface.Master * initMasterUnicast ( int peers_count, unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #
Initializes the Syncker as the Master application with the broadcast mode enabled.Notice
Slaves must be initialized with broadcast mode enabled as well.
Arguments
- int peers_count - Total number of Syncker hosts in the network (including the Master itself). Similar to specifying the -sync_count command-line argument.
- unsigned short udp_port - UDP port to be used. Similar to specifying the -sync_port command-line argument.
- Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.
Return value
Pointer to the Master interface.bool isMasterInitialized ( ) #
Returns a value indicating if the Master was initialized.Return value
true if the Master was initialized; otherwise, false.Master * getMaster ( ) #
Returns the master interface.Return value
Pointer to the Master interface.Slave * initSlave ( ) #
Initializes the Syncker as the Slave application using values specified via the command-line arguments.Return value
Pointer to the Slave interface.bool isSlaveInitialized ( ) #
Returns a value indicating if the slave was initialized.Return value
1 if the slave was initialized; otherwise, 0.Slave * getSlave ( ) #
Returns the Slave interface.Return value
Pointer to the slave interface.bool isSynckerInitialized ( ) #
Returns a value indicating if the Syncker (Master or Slave) was initialized.Return value
1 if the Syncker (master or slave) was initialized; otherwise, 0.Syncker * getSyncker ( ) #
Returns the base class interface for Master and Slave.Return value
Pointer to the syncker interface. It is the base class for Master and Slave.void setDebugWindow ( bool window ) #
Sets a value indicating if the Syncker's debug window is open.Arguments
- bool window - Enable flag. Use 1 to show the debug window, or 0 - to hide it.
bool isDebugWindow ( ) #
Returns a value indicating if the Syncker's debug window is enabled.Return value
true if the Syncker's debug window is enabled; otherwise, false.void destroySyncker ( ) #
Performs shutdown and destroys the Syncker.Notice
Called automatically, when the plugin is unloaded.
Slave * initSlaveBroadcast ( unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #
Initializes the Syncker as the Slave application with the broadcast mode enabled. Master's IP address will be detected automatically.Notice
Master must be initialized with broadcast mode enabled as well.
Arguments
- unsigned short udp_port - UDP port to be used. Similar to specifying the -sync_port command-line argument.
- Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.
Return value
Pointer to the slave interface.Slave * initSlaveBroadcast ( const char * master_address, unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #
Initializes the Syncker as the Slave application with the specified parameters and the broadcast mode enabled. Master's IP address is specified explicitly.Notice
Master must be initialized with broadcast mode enabled as well.
Arguments
- const char * master_address - Master IP address to be used. Similar to specifying the -sync_master_address command-line argument.
- unsigned short udp_port - UDP port to be used. Similar to specifying the -sync_port command-line argument.
- Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.
Return value
Pointer to the slave interface.Slave * initSlaveMulticast ( const char * multicast_address, unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #
Initializes the Syncker as the Slave application with the specified parameters and the multicast mode enabled. Master's IP address will be detected automatically.Notice
Master must be initialized with broadcast mode enabled as well.
Arguments
- const char * multicast_address - Multicast address to be used. Similar to specifying the -sync_multicast_address command-line argument.
- unsigned short udp_port - UDP port to be used. Similar to specifying the -sync_port command-line argument.
- Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.
Return value
Pointer to the slave interface.Slave * initSlaveMulticast ( const char * master_address, const char * multicast_address, unsigned short udp_port, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #
Initializes the Syncker as the Slave application with the specified parameters and the multicast mode enabled. Master's IP address is specified explicitly.Notice
Master must be initialized with broadcast mode enabled as well.
Arguments
- const char * master_address - Master IP address to be used. Similar to specifying the -sync_master_address command-line argument.
- const char * multicast_address - Multicast address to be used. Similar to specifying the -sync_multicast_address command-line argument.
- unsigned short udp_port - UDP port to be used. Similar to specifying the -sync_port command-line argument.
- Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.
Return value
Pointer to the slave interface.Slave * initSlaveUnicast ( unsigned short master_udp_port, unsigned short slave_udp_port = 0, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #
Initializes the Syncker as the Slave application with the specified parameters and the unicast mode enabled. Master's IP address will be detected automatically.Notice
Master must be initialized with broadcast mode enabled as well.
Arguments
- unsigned short master_udp_port - UDP port to be used by the Master.
- unsigned short slave_udp_port - UDP port to be used by the Slave. Similar to specifying the -sync_slave_port command-line argument.
- Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.
Return value
Pointer to the slave interface.Slave * initSlaveUnicast ( const char * master_address, unsigned short master_udp_port, unsigned short slave_udp_port = 0, Syncker::SWAP_SYNC_MODE swap_mode = Syncker.SWAP_SYNC_MODE.DEFAULT ) #
Initializes the Syncker as the Slave application with the specified parameters and the unicast mode enabled. Master's IP address is specified explicitly.Notice
Master must be initialized with broadcast mode enabled as well.
Arguments
- const char * master_address - Master IP address to be used. Similar to specifying the -sync_master_address command-line argument.
- unsigned short master_udp_port - UDP port to be used by the Master.
- unsigned short slave_udp_port - UDP port to be used by the Slave. Similar to specifying the -sync_slave_port command-line argument.
- Syncker::SWAP_SYNC_MODE swap_mode - Swap synchronization mode to be used by the Syncker. Similar to specifying the -sync_swap command-line argument.
Return value
Pointer to the slave interface.Syncker * initSyncker ( ) #
Initializes the Syncker as Master or Slave application depending on the values specified via the command-line arguments.Return value
Pointer to the syncker interface. It is the base class for Master and Slave.Manager * get ( ) #
Returns the Manager interface.Return value
Pointer to the manager interface.Last update:
13.12.2024
Помогите сделать статью лучше
Была ли эта статья полезной?
(или выберите слово/фразу и нажмите Ctrl+Enter