Unigine::Joint Class
Header: | #include <UniginePhysics.h> |
This class is used to simulate various types of joints and define common parameters shared by all joints.
See Also#
- A C++ API sample located in the <UnigineSDK>/source/samples/Api/Physics/JointCallbacks folder
- A C# API sample located in the <UnigineSDK>/source/csharp/samples/Api/Physics/JointCallbacks folder
- A UnigineScript API sample <UnigineSDK>/data/samples/physics/callbacks_03
Joint Class
Enums
TYPE#
Type of the joint defining its properties.Name | Description |
---|---|
JOINT_FIXED = 0 | Fixed joint. |
JOINT_BALL = 1 | Ball joint. |
JOINT_HINGE = 2 | Hinge joint. |
JOINT_PRISMATIC = 3 | Prismatic joint. |
JOINT_CYLINDRICAL = 4 | Cylindrical joint. |
JOINT_SUSPENSION = 5 | Suspension joint. |
JOINT_WHEEL = 6 | Wheel joint. |
JOINT_PARTICLES = 7 | Particles joint. |
JOINT_PATH = 8 | Path joint. |
NUM_JOINTS = 9 |
Members
Ptr<Joint> createJoint ( int type ) #
Creates a new joint of the specified type.Arguments
- int type - Joint type. One of the JOINT_* values.
Return value
New created joint smart pointer.Ptr<Joint> createJoint ( const char * type_name ) #
Creates a new joint of the specified type.Arguments
- const char * type_name - Joint type name.
Return value
New created joint smart pointer.void setAnchor0 ( const Math::Vec3 & anchor ) #
Sets coordinates of the anchor point in a system of coordinates of the first connected body.Arguments
- const Math::Vec3 & anchor - Coordinates of the anchor point in the body coordinate space.
Math::Vec3 getAnchor0 ( ) const#
Returns the coordinates of the anchor point in a system of coordinates of the first connected body.Return value
Coordinates of the anchor point in the body coordinate space.void setAnchor1 ( const Math::Vec3 & anchor ) #
Sets coordinates of the anchor point in a system of coordinates of the second connected body.Arguments
- const Math::Vec3 & anchor - Coordinates of the anchor point in the body coordinate space.
Math::Vec3 getAnchor1 ( ) const#
Returns the coordinates of the anchor point in a system of coordinates of the second connected body.Return value
Coordinates of the anchor point in the body coordinate space.void setAngularRestitution ( float restitution ) #
Sets the current angular restitution (stiffness) of the joint. Angular restitution defines how fast the joint compensates for change of the angle between two bodies. When bodies are turned relative each other, restitution controls the magnitude of force which is applied to both bodies so that their anchor points to become aligned again. For example:- 1 means that the joint is to return bodies in place throughout 1 physics tick.
- 0.2 means that the joint is to return bodies in place throughout 5 physics ticks.
Arguments
- float restitution - Angular restitution. The provided value will be clamped in the range [0;1].
float getAngularRestitution ( ) const#
Returns the current angular restitution (stiffness) of the joint. Angular restitution defines how fast the joint compensates for change of the angle between two bodies. When bodies are turned relative each other, restitution controls the magnitude of force which is applied to both bodies so that their anchor points to become aligned again. For example:- 1 means that the joint is to return bodies in place throughout 1 physics tick.
- 0.2 means that the joint is to return bodies in place throughout 5 physics ticks.
Return value
Angular restitution in the range [0;1].void setAngularSoftness ( float softness ) #
Sets the angular softness (elasticity) of the joint. When the joint is twisted, angular softness defines whether angular velocities of the bodies are averaged out. For example:- 0 means that the joint is rigid. Angular velocities of the first and the second body are independent.
- 1 means that the joint is elastic (jelly-like). If the first body changes its velocity, velocity of the second body is equalized with it.
Arguments
- float softness - Angular softness. The provided value will be clamped in the range [0;1].
float getAngularSoftness ( ) const#
Returns the current angular softness (elasticity) of the joint. When the joint is twisted, angular softness defines whether angular velocities of the bodies are averaged out. For example:- 0 means that the joint is rigid. Angular velocities of the first and the second body are independent.
- 1 means that the joint is elastic (jelly-like). If the first body changes its velocity, velocity of the second body is equalized with it.
Return value
Angular softness in the range [0;1].void setNode0 ( const Ptr<Node> & node0 ) #
Sets the node possessing the first body to be connected to the joint.Arguments
- const Ptr<Node> & node0 - Node possessing the first body connected to the joint is assigned. The node must be an object and must have a body assigned.
Ptr<Node> getNode0 ( ) const#
Returns a node possessing the first body connected to the joint.Return value
Node possessing the first body connected to the joint is assigned (if it exists).void setNode1 ( const Ptr<Node> & node1 ) #
Sets the node possessing the second body to be connected to the joint.Arguments
- const Ptr<Node> & node1 - Node possessing the second body connected to the joint is assigned. The node must be an object and must have a body assigned.
Ptr<Node> getNode1 ( ) const#
Returns a node possessing the second body connected to the joint.Return value
Node possessing the second body connected to the joint is assigned (if it exists).void setBody0 ( const Ptr<Body> & body ) #
Sets the first body connected using the joint.Arguments
Ptr<Body> getBody0 ( ) const#
Returns the first body connected using the joint.Return value
The first body connected with the joint.void setBody1 ( const Ptr<Body> & body ) #
Sets the second body connected using the joint.Arguments
Ptr<Body> getBody1 ( ) const#
Returns the second body connected using the joint.Return value
The second body connected with the joint.Ptr<BodyRigid> getBodyRigid0 ( ) #
Returns the first connected body as a rigid body.Return value
The first rigid body connected using the joint or NULL (0), if the body is not rigid.Ptr<BodyRigid> getBodyRigid1 ( ) #
Returns the second connected body as a rigid body.Return value
The second rigid body connected using the joint or NULL (0), if the body is not rigid.void setBroken ( bool broken ) #
Sets a value indicating if the joint is broken or not.Arguments
- bool broken - Positive number to break the joint, 0 to make it intact.
bool isBroken ( ) const#
Returns a value indicating if the joint is broken or not.Return value
Positive number if the joint is broken; otherwise, 0.void * addBrokenCallback ( Unigine::CallbackBase1< Ptr<Joint> > * func ) #
Adds a callback function to be called when the joint breaks. The signature of the broken callback function must be as follows:void broken_callback_function_name(JointPtr joint);
You can set a callback function as follows:
addBrokenCallback(MakeCallback(broken_callback_function_name));
Example: Setting a joint broken callback function for a certain class:
class SomeClass {
/*...*/
// joint for which a broken callback function is to be set
Unigine::JointPtr joint;
/*...*/
};
/*...*/
// callback function
void SomeClass::on_broken(JointPtr joint)
{
// insert your code handling joint breaking here
}
void SomeClass::registerCallback()
{
// setting the on_broken() function to handle breaking for the joint
joint->addBrokenCallback(MakeCallback(this, &SomeClass::on_broken));
}
Arguments
- Unigine::CallbackBase1< Ptr<Joint> > * func - Callback pointer.
Return value
ID of the last added broken callback, if the callback was added successfully; otherwise, nullptr. This ID can be used to remove this callback when necessary.bool removeBrokenCallback ( void * id ) #
Removes the specified callback from the list of broken callbacks.Arguments
- void * id - Broken callback ID obtained when adding it.
Return value
True if the broken callback with the given ID was removed successfully; otherwise false.void clearBrokenCallbacks ( ) #
Clears all added broken callbacks.void setCollision ( int c ) #
Sets a value indicating if collisions between the connected bodies are enabled.Arguments
- int c - Positive number to enable collisions between the bodies, 0 to disable them.
int getCollision ( ) const#
Returns a value indicating if collisions between the connected bodies are enabled.Return value
Positive number if collisions between the bodies are enabled; otherwise, 0.void setEnabled ( bool enable ) #
Enables or disables joint calculations.Arguments
- bool enable - Positive number to enable the joint, 0 to disable it.
bool isEnabled ( ) const#
Returns a value indicating if the joint calculations are enabled.Return value
1 if the joint is enabled; otherwise, 0.bool isEnabledSelf ( ) const#
Returns a value indicating is the joint is enabled.Return value
1 if the joint is enabled; otherwise, 0.void setFrozen ( bool f ) #
Freezes or unfreezes the joint.Arguments
- bool f - Positive number to freeze the joint, 0 to unfreeze it.
bool isFrozen ( ) const#
Returns a value indicating if the joint is frozen or not.Return value
Positive number if the joint is frozen; otherwise, 0.int setID ( int id ) #
Sets the unique ID for the joint.Arguments
- int id - Unique ID.
Return value
1 if the ID is set successfully; otherwise, 0.int getID ( ) const#
Returns the unique ID of the joint.Return value
Unique ID.void setLinearRestitution ( float restitution ) #
Sets the linear restitution (stiffness) of the joint. Linear restitution defines how fast the joint compensates for linear coordinate change between two bodies. When bodies are dragged apart, restitution controls the magnitude of force which is applied to both bodies so that their anchor points to become aligned again. For example:- 1 means that the joint is to return bodies in place throughout 1 physics tick.
- 0.2 means that the joint is to return bodies in place throughout 5 physics ticks.
Arguments
- float restitution - Linear restitution. The provided value will be clamped in the range [0;1].
float getLinearRestitution ( ) const#
Returns the current linear restitution (stiffness) of the joint. Linear restitution defines how fast the joint compensates for linear coordinate change between two bodies. When bodies are dragged apart, restitution controls the magnitude of force which is applied to both bodies so that their anchor points to become aligned again. For example:- 1 means that the joint is to return bodies in place throughout 1 physics tick.
- 0.2 means that the joint is to return bodies in place throughout 5 physics ticks.
Return value
Linear restitution in the range [0;1].void setLinearSoftness ( float softness ) #
Sets the linear softness (elasticity) of the joint. When the joint is stretched, linear softness defines whether linear velocities of the bodies are averaged out. For example:- 0 means that the joint is rigid. Linear velocities of the first and the second body are independent.
- 1 means that the joint is elastic (jelly-like). If the first body changes its velocity, velocity of the second body is equalized with it.
Arguments
- float softness - Linear softness. The provided value will be clamped in the range [0;1].
float getLinearSoftness ( ) const#
Returns the current linear softness (elasticity) of the joint. When the joint is stretched, linear softness defines whether linear velocities of the bodies are averaged out. For example:- 0 means that the joint is rigid. Velocities of the first and the second body are independent.
- 1 means that the joint is elastic (jelly-like). If the first body changes its velocity, velocity of the second body is equalized with it.
Return value
Linear softness value in the range [0;1].void setMaxForce ( float force ) #
Sets the maximum amount of force that can be exerted on the joint. If this limit is exceeded, the joint breaks.Arguments
- float force - Maximum amount of force.
float getMaxForce ( ) const#
Returns the maximum amount of force that can be exerted on the joint. If this limit is exceeded, the joint breaks.Return value
Maximum amount of force.void setMaxTorque ( float torque ) #
Sets the maximum amount of torque that can be exerted on the joint. If this limit is exceeded, the joint breaks.Arguments
- float torque - Maximum amount of torque.
float getMaxTorque ( ) const#
Returns the maximum amount of torque that can be exerted on the joint. If this limit is exceeded, the joint breaks.Return value
Maximum amount of torque.void setName ( const char * name ) #
Sets the name of the joint.Arguments
- const char * name - Name of the joint.
const char * getName ( ) const#
Returns the name of the joint.Return value
Name of the joint.void setNumIterations ( int num_iterations ) #
Sets the number of iterations used to solve joints. Note that if this value is too low, the precision of calculations will suffer.Arguments
- int num_iterations - Number of iterations. If a non-positive value is provided, 1 will be used instead.
int getNumIterations ( ) const#
Returns the current number of iterations used to solve joints.Return value
Number of iterations.Joint::TYPE getType ( ) const#
Returns the type of the joint.Return value
One of the JOINT_* pre-defined variables.const char * getTypeName ( ) const#
Returns the name of the joint type.Return value
Type name.const char * getTypeName ( int type ) #
Returns the name of a joint type with a given ID.Arguments
- int type - Joint type ID. One of the JOINT_* values.
Return value
Joint type name.void setWorldAnchor ( const Math::Vec3 & anchor ) #
Sets the anchor point in the world coordinates.Arguments
- const Math::Vec3 & anchor - Coordinates of the anchor point in the world space.
Math::Vec3 getWorldAnchor ( ) const#
Returns the anchor point in the world coordinates.Return value
Coordinates of the anchor point in the world space.Ptr<Joint> clone ( ) const#
Clones the joint.Return value
Copy of the joint.void renderVisualizer ( const Math::vec4 & color ) #
Renders the joint.You should enable the engine visualizer by the show_visualizer 1 console command.
Arguments
- const Math::vec4 & color - Color, in which the joint will be rendered.
bool saveState ( const Ptr<Stream> & stream ) const#
Saves the state of a given node into a binary stream.- If a node is a parent for other nodes, states of these child nodes need to be saved manually.
- To save the state from a buffer, file or a message from a socket, make sure the stream is opened. For buffers and files, you also need to set the proper position for reading.
Example using saveState() and restoreState() methods:
// set the joint state
joint->setAngularRestitution(0.8f);
// save state
BlobPtr blob_state = Blob::create();
joint->saveState(blob_state);
// change the state
joint->setAngularRestitution(0.4f);
// restore state
blob_state->seekSet(0); // returning the carriage to the start of the blob
joint->restoreState(blob_state);
Arguments
Return value
true if the node state is saved successfully; otherwise, false.bool restoreState ( const Ptr<Stream> & stream ) #
Restores the state of a given node from a binary stream.- If a node is a parent for other nodes, states of these child nodes need to be restored manually.
- To save the state into a buffer, file or a message from a socket, make sure the stream is opened. If necessary, you can set a position for writing for buffers and files.
Example using saveState() and restoreState() methods:
// set the joint state
joint->setAngularRestitution(0.8f);
// save state
BlobPtr blob_state = Blob::create();
joint->saveState(blob_state);
// change the state
joint->setAngularRestitution(0.4f);
// restore state
blob_state->seekSet(0); // returning the carriage to the start of the blob
joint->restoreState(blob_state);
Arguments
Return value
true if the node state is restored successfully; otherwise, false.void swap ( const Ptr<Joint> & joint ) #
Swaps the joints saving the pointers.Arguments
- const Ptr<Joint> & joint - A joint to swap.
Last update:
2021-04-09
Help improve this article
Was this article helpful?
(or select a word/phrase and press Ctrl+Enter)