Console

Unigine console is used for standard input, output and error streams for the file loading, rendering system, audio and video systems, path-finding system, physics engine, file system and many others.

Can be opened in any UNIGINE-based application.

How to Open Console

A built-in console is called by pressing the grave accent (`) key, placed under the ESC key:

The console can be hidden by pressing the grave accent (`) key one more time. See how to assign another key here.

Console Operation

Console operation can be either command or variable:

Command is a directive to a console to perform a specific task.
Variable is an identifier that contains some stored value.

Command Syntax

Console command can take null, one or several arguments. The syntax is:

Source code

command_to_execute // null argument
command_to_execute argument // one argument
command_to_execute argument argument // two arguments

Hints

To see the current variable value, other acceptable values and short description, just type it and press the Enter key. For example, if you type the video_resizablevariable, you get the following result:
Source code
```
video resizable toggle
0 is non-resizable mode
1 is resizable mode
video_resizable = 1
```
To complete a command or variable name, just start typing first letters and press the TAB key until you get the required result.

How to Change the Console Opening Key

If you want to change the default grave accent (`) console turning on or off key, do one of the following actions:

Open the configuration file data/unigine.cfg and change the ASCII-based key code in the following line:
Source code (XML)
```
<item name="console_key" type="int">96</item>
```

Basic operations on the console, command and variable.

Name	Description	Arguments
bind	Command. Bind a key to a command. For example, to bind the asterisk () key to the world_reloadcommand, type: Source code `Unigine~# bind world_reload`	1. A key to bind 2. A command to execute
clear	Command. Clear all messages from the console window.
console_key	Variable. Print the ASCII code of the current console turning on or off key. Command. Assign a new key to turn on or off the console.	An ASCII code of the key
help	Command. Print the list of the built-in commands.
hide	Command. Hide the console.
ls	Command. Print a set of all available console keys, commands and variables.
show	Command. Show the console.
switch	Command. Switch among all variable values. Notice Make sure, that the variable is integer.	A variable, which values will be switched
toggle	Command. Enable or disable a variable. Notice Enabled variable will have a default value. For example, if you toggle the show_visualizer variable, you will get the following result: Source code `toggle show_visualizer show_visualizer = 0 // disable visualizer toggle show_visualizer show_visualizer = 1 // enable visualizer`	A variable to be toggled
unbind	Command. Unbind a key from a command.	A key to unbind

Console GUI

Operations on the console GUI.

Name	Description	Arguments
console_size	Variable. Print a current size of the console font. Command. Set a size for the console font.	4 – 32 ( 16 by default)
console_font	Variable. Print a current path to a .ttf file used as a console font. Command.* Set a path to a *.ttf file to be used as a console font.	A path to a *.ttf file ( core/gui/console.ttf by default)

Basic operations on the engine.

Name	Description	Arguments
engine_threaded	Variable. Print a value specifying if all _threaded console variables are enabled. Command.* Globally enable or disable all *_threaded console variables ( world_threaded, physics_threaded, pathfind_threaded). Notice If these variables are enabled, multithreading is used.	0 - disabled 1 - enabled (by default)
quit	Quit the engine.

Engine Configuration File

General operations on the engine configuration.

Name	Description	Arguments
config_load	Variable. Print the current path to the engine configuration file. Command. Set a new path to the engine configuration file.	A path to the configuration file ( data/unigine.cfg by default)
config_readonly	Variable. Print the value specifying if the data could be written to the configuration file. Command. Specify if the data could be written to the configuration file.	0 - writing is allowed 1 - writing is forbidden
config_save	Command. Save the engine configuration file.	A path to the configuration file (optional)

Engine Analyzer

Operations on the engine debugging.

Notice

Available only for debug builds.

Name	Description	Arguments
engine_analyze	Command. Analyze the performance of the engine. Can be used only in the single-threaded mode. The information can be printed to the console or dumped into a specified file.	A path to the logfile to dump the log file information into (optional)

Basic operations on world.

Name	Description	Arguments
world_load	Command. Load the specified world. A cache file can also be specified for faster application loading.	1. A name of the world to load (inside of the data directory) 2. A name of the world cache file (optional)
world_quit	Command. Clear all the world data.
world_save	Command. Save the world.
world_reload	Command. Reload the world. A cache file can also be specified to be reloaded.	A name of the world cache file (optional)
world_handler_3d	Variable. Print the value indicating which world handler is used. Command. Set the world handler.	0 - screen scale 1 - 3D

World State

Serialized operations on world.

Name	Description	Arguments
state_save	Command. Save states of all world nodes into the .save file and take a screenshot. Notice File is saved as quicksave.save in the /bin/save directory by default. You can pass another directory as an argument.	1. A path to the file (optional) 2. A noscreenshot flag - save a state without taking a screenshot (optional)
state_restore	Command. Restore states of all world nodes. Notice File is restored using quicksave.save file in the /bin/save directory by default. You can pass another directory as an argument.	A path to the file (optional)

World Resources

Operations, representing information on ObjectGrass,ObjectMeshClutterandWorldClutterobjects.

Name	Description
world_manager_info	Command. Print general information (the number of registered/loaded resources; used memory) on world manager resources, such as: ImageManaged - loaded images (if not fully loaded, a dummy texture or one-mipmap texture is used) PathManaged - loaded splines ImageStream - streamed mask images MeshStream - streamed meshes used as an intersection mask for grass or clutters
world_manager_list	Command. Print the list of resources handled by the world manager (mask images for ObjectGrass and WorldClutter objects), if any.

Notice

To get information on loaded meshes and images, see the Render resources section.

World Queueing

Operations on the world queued nodes.

Name	Description	Arguments
world_queue	Command. Print names of all the queued nodes, if any.
world_delay	Variable. Print the current time delay between loading of the queued nodes in seconds. Command. Set the time delay between loading of the queued nodes in seconds. For example, this function can be used to debug streaming of resources.	0 – 1 ( 0 by default)
world_clear	Command. Clear the queue and all of the loaded nodes.

Operations on the sound.

Name	Description	Arguments
sound_occlusion	Variable. Print the value indicating if sound occlusion is enabled. Command. Occlude sound if other nodes are found in front of the sound source.	0 - disabled 1 - enabled (by default)
sound_reverb	Variable. Print the current sound reverberation mode. Command. Set a sound reverberation mode.	0 - sound reverberation is disabled 1 - single-environment sound reverberation 2 - multi-environment sound reverberation (by default)

Sound Resources

Operations on the sound resources.

Name	Description	Arguments
sound_manager_load_samples	Variable. Print the value indicating if sound samples are preloaded on world loading. Command. Preload sound samples on world loading (ensure there are no lags afterwards but increases loading time and memory footprint).	0 - disabled (by default) 1 - enabled
sound_manager_info	Command. Print general information on sound resources: the number of static and streamed sound sources (registered/loaded; memory used).
sound_manager_list	Command. Print the detailed list of sound files, if any, with used space.
sound_manager_sample_static_memory	Variable. Print the current cache memory limit for static sound resources in Mbytes. Command. Set the cache memory limit for static sound resources in Mbytes.	1 – 1024 ( 64 by default)
sound_manager_sample_stream_memory	Variable. Print the current cache memory limit for streamed sound resources in Mbytes. Command. Set the cache memory limit for streamed sound resources in Mbytes.	1 – 1024 ( 16 by default)

Operations for fast positioning of the game camera.

Name	Description	Arguments
camera_get	Command. Get the current position of the game camera and its rotation (Euler angles).
camera_set	Command. Set position and rotation (Euler angles) of the game camera. Notice Position and rotation of the game camera can be changed only if it is unlocked. Source code `camera_set 20.0 19.0 3.0 0.0 45.0 90.0`	The first 3 arguments set position. The second 3 arguments set rotation (optional)

Operations on the File system.

Name	Description	Arguments
filesystem_clear	Command. Remove all the loaded, but unused resources.
filesystem_icase	Variable. Print the value indicating if the case of file names in the data directory is ignored. Command. Ignore the case of file names in the data directory.	0 - checked (by default) 1 - ignored
filesystem_ignore	Variable. Print the list of ignored directories. Command. Set the folders to be ignored within the data directory. It can be used to discard version control system folders. This option comes into effect only after the filesystem_reloadcommand is run. Notice Multiple values are comma separated (no whitespaces).	A full directory name
filesystem_mmap	Variable. Print the value indicating if memory-mapped files are used. Command. Use memory-mapped files for faster access.	0 - not used 1 - used (default)
filesystem_reload	Command. Reload the file system, thereby update the list of files.

File System Info

Operations, representing information on the File system.

Name	Description	Arguments
filesystem_info	Command. Print general file system information (the total number of files and files per package).
filesystem_list	Command. Print the list of all files.

File Queueing

Operations, representing information on the file loading queue.

Name	Description	Arguments
filesystem_queue	Command. Print names of the queued files, if any.
filesystem_delay	Variable. Print the current time delay between the loading of the queued files in seconds. Command. Set the time delay between loading of the queued files in seconds. For example, this function can be used to debug streaming of resources.	0 – 1 ( 0 by default)

Operations on UnigineEditor.

Name	Description	Arguments
editor_load	Command. Load UnigineEditor (both Qt and Unigine-native GUI will be loaded).
editor_quit	Command. Quit UnigineEditor (both Qt and Unigine-native GUI will be hidden).
editor_reload	Command. Reload UnigineEditor (both Qt and Unigine-native GUI will be reloaded). This command reloads the editor script, all unsaved changes are lost.

Editor Controls

Operations on UnigineEditor controls.

Name	Description	Arguments
default_presets_edit_mode	Command. Enable or disable default preset editing.	0 (default) - disable editing 1 - enable editing

Operations on assets.

Name	Description	Arguments
assets_delete	Variable. Print the current mode used to delete assets. Command. Delete all assets by using the specified mode.	0 - delete assets from the assets folder and the sub folders 1 - delete assets from the assets folder and the sub folders and the corresponding assets in the runtime formats generated in the data folder.
assets_import	Command. Import an asset from the external folder. Notice When importing an asset, the *.asset file with the same name is created in the destination folder. Source code `assets_import 1 D:\external_assets\plane.fbx`	The command receives 3 arguments: The flag indicating whether to copy the source asset from the external folder into the assets folder or to keep the link to this source file: 0 - copy the source asset into the assets folder and store it together with the generated .asset file. 1 - do not copy the source asset and keep the link to it inside the generated .asset file. An absolute path to the source asset. (optional) A destination folder relative to the assets folder.
assets_reload	Command. Synchronize assets in the assets and the data folder.
assets_verbose	Variable. Print the current log level used for the asset system. Command. Set the log level for the asset system.	0 - output only errors and warnings (by default) 1 - output all log information.

Operations on the world, system and editor scripts.

World Script Analyzer

Operations on the world script debugging.

Notice

Available only for debug builds.

Name	Description	Arguments
world_memory_usage	Command. Print memory usage by the world script to the console or dump into a specified file.	A path to a file to dump the information into (optional)
world_analyze	Command. Analyze the performance of the world script. Can be used only in the single-threaded mode. The information can be printed to the console or dumped into a specified file.	A path to the logfile to dump the log file information into (optional)
world_disassemble	Command. Disassemble the world script. The information can be printed to the console or dumped into a specified file.	A path to a file to dump the information into (optional)
world_manager_images_memory	Variable. Print the cache memory limit set for images in MB. Command. Set the cache memory limit for images in MB.	0 - 8192 ( 128 by default)
world_manager_meshes_memory	Variable. Print the cache memory limit set for meshes in MB. Command. Set the cache memory limit for meshes in MB.	0 - 8192 ( 128 by default)

Script Debugger

Operations on the per-function breakpoint. The syntax to set the breakpoint is the following:

Source code

system_breakpoint/world_breakpoint/editor_breakpoint set/remove function_name number_of_arguments

Name	Description	Arguments
world_breakpoint	Command. Set a breakpoint to the specified function in the world script. The syntax to set the breakpoint is the following: Source code `world_breakpoint set/remove function_name number_of_arguments`	1. Name of the function 2. The number of the arguments
system_breakpoint	Command. Set a breakpoint to the specified function in the system script. The syntax to set the breakpoint is the following: Source code `system_breakpoint set/remove function_name number_of_arguments`	1. Name of the function 2. The number of the arguments
editor_breakpoint	Command. Set a breakpoint to the specified function in the editor script. The syntax to set the breakpoint is the following: Source code `editor_breakpoint set/remove function_name number_of_arguments`	1. Name of the function 2. The number of the arguments

Name	Description	Arguments
world_threaded	Variable. Print the thread mode used to update the world. Command. Specify if the world will be updated in a single or multiple-threaded mode.	0 - single-threaded 1 - multiple-threaded (by default) Multiple-threaded mode creates 8 thread jobs and splits the nodes hierarchy: it finds root nodes (with their children) and distributes them in a balanced manner. Nodes are distributed between thread jobs, thread jobs are distributed between CPUs cores. Then, in each thread, it selects nodes to be updated. Thus, world update takes less time in case of complex nodes hierarchy.
physics_threaded	Variable. Print the value indicating how many threads are used to perform physical calculations. Command. Set a number of threads used to perform physical calculations.	0 - separate thread is not used at all (physics will be calculated in the main thread) - flush() and render() are called sequentially 1 - one separate thread is used (physics will be calculated in separate thread) - flush() and render() are called simultaneously 2 - all available CPUs are used to perform multi-threaded physical calculations (by default)
pathfind_threaded	Variable. Print the value indicating how many threads are used to perform physical calculations. Command. Set a number of threads used to perform physical calculations.	0 - separate thread is not used at all (pathfinding will be calculated in the main thread) 1 - one separate thread is used (pathfinding will be calculated in separate thread) 2 - all available CPUs are used to perform multi-threaded physical calculations (by default)

Asynchronous operations.

Name	Description	Arguments
async_log_mode	Variable. Print the value indicating which engine component's operations are shown. Command. Print the list of asynchronous operations (loading / unloading of images, meshes, files, etc.) related to the specified engine component. Notice You can specify whether only loading and unloading operations, or all operations should be shown.	0 - do not print 1 - print operations with the nodes 2 - print operations with the renderer resources (loading / unloading of meshes and textures) 3 - print operations with the file system resources (loading / unloading of files) 2 - print all operations with the nodes, renderer and file systems resources
async_log_priority	Variable. Print the value indicating whether only loading and unloading operations, or all operations are shown via async_log_mode. Command. Specify whether only loading and unloading operations, or all operations will be shown via async_log_mode.	0 - print only frequently used operations 1 - print all operations

Operations on the visualizer.

Notice

To debug the world and objects within it, the show_visualizercommand should be set to 1.

Name	Description	Arguments
show_visualizer	Variable. Print the current visualizer mode. Command. Specify if the visualizer geometry (bounding volumes, wireframe, physics bodies and shapes, etc.) is shown.	0 - visualizer is not shown (by default) 1 - visualizer is shown with a depth testing (to check if other objects in the scene do not occlude visualized geometry) 2 - visualizer is shown without a depth testing (visualized geometry is rendered in front of all objects in the scene)
show_fps	Variable. Print the value indicating if the FPS counter is hidden. Command. Show or hide the FPS counter.	0 - hide the FPS counter 1 - display the FPS counter (by default) 2 - display the FPS counter and statistics on the last 600 frames: minimum FPS, maximum FPS and average FPS for the last 600 frames.
show_messages	Variable. Print the value indicating if the system messages are displayed in the viewport. Command. Hide the system messages.	0 - hidden 1 - displayed (by default)

World Debugging

Operations on the world debugging.

Name	Description	Arguments
world_show_spatial	Variable. Print the value indicating if the scene spatial tree is displayed. Command. Display the scene spatial tree.	0 - hidden (by default) 1 - displayed
world_show_visualizer	Variable. Print the list of node types for which the visualizer is displayed. Command. Set node types for which the visualizer is displayed.	The available arguments are: all world field light decal object player physical navigation obstacle sound To hide the visualizer, pass "" as a argument.
render_show_triangles	Variable. Print the current wireframe mode for scene triangles. Command. Set the wireframe mode for scene triangles.	0 - triangles are hidden (by default) 1 - front faces with the depth test are shown 2 - front faces without the depth test are shown 3 - front and back faces without the depth test are shown

Node Debugging

Operations on the node debugging.

Name	Description	Arguments
world_show_handler	Variable. Print the value indicating if nodes handlers for lights, particle systems, sectors, portals and so on are displayed. Command. Display nodes handlers for lights, particle systems, sectors, portals, etc.	The available arguments are: all world field light decal object player physical navigation obstacle sound To hide the visualizer, pass "" as an argument.
render_show_decals	Variable. Print the value indicating if the wireframe for decals is displayed. Command. Display the wireframe for decals.	0 - hidden (by default) 1 - displayed

Occluder Debugging

Operations on the occluder debugging.

Name	Description	Arguments
render_show_occluder	Variable. Print the value indicating if buffer used for occluders is displayed in the viewport. Command. Display buffer used for occluders displayed in the viewport.	0 - hidden (by default) 1 - displayed

Physics Debugging

Name	Description	Arguments
physics_show_contacts	Variable. Print the value indicating if contact points between physical bodies are displayed. Command. Display contact points between physical bodies.	0 - hidden (by default) 1 - displayed
physics_show_joints	Variable. Print the value indicating if joints between physical bodies are displayed. Command. Display joints between physical bodies.	0 - hidden (by default) 1 - displayed
physics_show_shapes	Variable. Print the value indicating if collision shapes for physical bodies are displayed. Command. Display collision shapes for physical bodies.	0 - hidden (by default) 1 - displayed

Texture Debugging

Operations on the texture debugging.

Name	Description	Arguments
render_show_mipmaps	Variable. Print the value indicating if mipmap levels are displayed in color. Command. Display mipmap levels in color.	0 - hidden (by default) 1 - displayed in color

Occlusion Queries

Name	Description	Arguments
render_show_queries	Variable. Print the value indicating if occlusion query boxes are displayed. Command. Display occlusion query boxes. Notice Make sure that the Culled by occlusion query flag is set for nodes.	0 - hidden (by default) 1 - displayed

Operations on the Performance profiler.

Name	Description	Arguments
show_profiler	Variable. Print a mode set to Performance profiler. Command. Specify a mode for Performance profiler.	0 - profiler information is hidden (by default) 1 - generic profiler information is shown 2 - rendering profiler information is shown 3 - physics profiler information is shown 4 - world profiler information is shown 5 - pathfinding and sound usage profiler information is shown
render_profiler	Variable. Print the value indicating if the renderer performance profiler block is enabled. Command. Set an additional renderer performance profiler block as part of in the base profiler. Notice Base Profiler should be enabled for renderer performance profiler to be seen.	0 - disabled (by default) 1 - enabled

Profiler GUI

Operations on the Performance profiler style.

Name	Description	Arguments
profiler_size	Variable. Print a current size of the profiler font. Command. Set a size for the profiler font.	4 – 32 ( 13 by default)
profiler_font	Variable. Print a current path to a .ttf file used as a profiler font. Command.* Set a path to a *.ttf file to be used as a profiler font.	A path to a *.ttf file ( core/gui/font.ttf by default)

Notice

To come to effect, the commands below require video_restart to be run after them.

Name	Description
video_restart	Command. Restart the video application to apply changes to video settings, if any.

Resolution and Full Screen

Operations on the video resolution adjustment.

Name	Description	Arguments
video_mode	Variable. Print the current video resolution mode. Command. Set a new video resolution mode.	-1 - video_width× video_height 0 - 640 × 360 1 - 960 × 540 2 - 1024 × 576 3 - 1280 × 720 4 - 1366 × 768 5 - 1600 × 900 6 - 1920 × 1080 7 - 2560 × 1440 8 - 3840 × 2160 9 - 640 × 400 10 - 960 × 600 11 - 1024 × 640 12 - 1280 × 800 13 - 1440 × 900 14 - 1680 × 1050 15 - 1920 × 1200 16 - 2560 × 1600 17 - 640 × 480 18 - 800 × 600 19 - 1024 × 768 20 - 1280 × 960 21 - 1280 × 1024 22 - 1600 × 1200 23 - 2048 × 1536 24 - 2560 × 2048
video_width	Variable. Print the current screen width. Command. Set the custom screen width. Notice Valid only if the video_modecommand is set to -1.	0 – 10000
video_height	Variable. Print the current screen height. Command. Set the custom screen height. Notice Valid only if the video_modecommand is set to -1.	0 – 10000
video_resizable	Variable. Print the value indicating if the application window is resizable. Command. Set a resizable mode for an application window (its size can be changed on the fly without restarting the application).	0 - non-resizable mode (by default) 1 - resizable mode
video_fullscreen	Variable. Print the value indicating if the application is running in full-screen mode. Command. Set full-screen mode for the application window.	0 - windowed mode (by default) 1 - full-screen mode 2 - full-window mode when an application window is rendered without decorations

Graphics Settings

Operations on the graphics adjustment.

Name	Description	Arguments
video_vsync	Variable. Print the value indicating if the vertical FPS synchronization is enabled. Command. Set the vertical FPS synchronization.	0 - not to synchronize FPS (by default) 1 - synchronize FPS
video_refresh	Variable. Print the current graphics refresh rate. Command. Set the graphics refresh rate.	0 (by default) – 200
video_gamma	Variable. Print the current gamma correction value. Command. Set the gamma correction value.	0.5 – 3.5 ( 1.0 by default)

Multi-Monitor and Stereo Rendering

Name	Description	Arguments
video_surround	Variable. Print a value indicating whether rendering across 3 monitors is enabled or not. Command. Enable or disable rendering of the application across 3 monitors.	0 - disabled (by default) 1 - enabled
video_surround_border	Variable. Print the size of monitor bezel compensation in pixels. Command. Set the size of monitor bezel compensation in pixels. It is used together with video_surround enabled.
video_quad_buffer	Variable. Print a value indicating if quad buffering is enabled. Command.Enable quad buffered stereo.	0 - disabled (by default) 1 - enabled

Operations on the renderer.

Name	Description	Arguments
shaders_reload	Command. Reload the renderer. This command reloads all shaders (but does not update shader variables - it is done automatically). It can also be called, for example, for graphics API changes to come to effect.
textures_reload	Command. Reload all render textures.
render_manager_reload	Command. Reload all render manager resources. You can specify an optional argument to reload resources selectively.	mesh - reload only meshes texture - reload only textures

Rendering Resources

Operations, representing information on the rendering resources.

Name	Description
render_manager_info	Command. Print general information (the number of registered/loaded resources; memory used) on renderer manager resources: Mesh - loaded meshes MeshSkinned - skinned meshes MeshDynamic - dynamic meshes stored in the memory rather than on disk TextureManaged - images loaded into the memory; if image is not fully loaded, a dummy texture or a mipmap texture is used TextureStream - streamed images
render_manager_list	Command. Print the list of loaded resources and detailed information regarding: Meshes, MeshSkinned and MeshDynamic with used memory TextureManaged (textures loaded into memory at once) and TextureStream (textures streamed on demand) with texture format, used compression, if any, texture dimensions and size (available only for already loaded textures).

Name

Description

render_manager_info

Command. Print general information (the number of registered/loaded resources; memory used) on renderer manager resources:
1. Mesh - loaded meshes
2. MeshSkinned - skinned meshes
3. MeshDynamic - dynamic meshes stored in the memory rather than on disk
4. TextureManaged - images loaded into the memory; if image is not fully loaded, a dummy texture or a mipmap texture is used
5. TextureStream - streamed images

render_manager_list

Command. Print the list of loaded resources and detailed information regarding:
1. Meshes, MeshSkinned and MeshDynamic with used memory
2. TextureManaged (textures loaded into memory at once) and TextureStream (textures streamed on demand) with texture format, used compression, if any, texture dimensions and size (available only for already loaded textures).

Rendering Buffers

Rendering Buffer Info

Operations, representing information on the rendering buffers.

Name	Description
render_info	Command. Print general information on render buffers: Renderer - GPU and available video memory Per-type information on buffers created by the renderer, their number and used space Total - how much video memory is used in whole
render_list	Command. Print the detailed list of render buffers, with texture size, format and used space.

Rendering Buffer Debugging

Operations on the rendering buffer debugging.

Name	Description	Arguments
render_show_textures	Variable. Print the current set of buffers used by the renderer. Command. Specify a mode of textures buffers used by the renderer (how many buffers are shown depends on the number of buffers in a row specified by the render_show_number) command.	0 - all buffers are hidden (by default) 1 - show render textures (compact). 2 - show render textures (full).
render_use_format_rg11b10	Variable. Print the value indicating if the RG11B10 texture format is used for rendering buffers. Command. Set a value indicating if the RG11B10 texture format is used for rendering buffers.	0 - do not use the RG11B10 texture format 1 - use the RG11B10 texture format (by default).
render_use_format_depth_d32f	Variable. Print the value indicating if the D32F texture format is used for the depth buffers. Command. Set a value indicating if the D32F texture format is used for the depths buffers.	0 - do not use the D32F texture format 1 - use the D32F texture format (by default).
render_show_number	Variable. Print the current number of buffers in a row to be output to the screen. Command. Set the number of buffers in a row to be output to the screen.	A number of buffers in a row (from 1 to 8) ( 4 by default). 1 - a single texture per screen 2 - 4 textures per screen 3 - 9 textures per screen 4 - 16 textures per screen

Rendering Passes

Operations on rendering passes.

Name	Description	Arguments
render_skip_post_materials	Variable. Print the value indicating if the rendering of post postprocess materials is skipped. Command. Skip the rendering of post postprocess materials.	0 - enabled (by default) 1 - skipped
render_skip_render_materials	Variable. Print the value indicating if the rendering of postprocess materials is skipped. Command. Skip the rendering of postprocess materials.	0 - enabled (by default) 1 - skipped
render_skip_transparent_ambient	Variable. Print the value indicating if the ambient rendering pass is skipped for transparent objects rendering. Command. Skip the ambient rendering pass for transparent objects rendering. Notice This console command takes effect only when the forward rendering pass is used for transparent objects rendering.	0 - enabled (by default) 1 - skipped
render_skip_transparent_light	Variable. Print the value indicating if the rendering pass for world lights is skipped for transparent objects rendering. Command. Skip the world lights' rendering pass for transparent objects rendering. Notice This console command takes effect only when the forward rendering pass is used for transparent objects rendering.	0 - enabled (by default) 1 - skipped

Meshes

Operations on the mesh rendering.

Name	Description	Arguments
render_alpha_fade	Variable. Print the value indicating if alpha fading (dithering) is enabled for objects. Command. Use alpha fading (dithering) for objects.	0 - disabled 1 - enabled (by default)

Mesh Loading

Operations on the mesh loading.

Name	Description	Arguments
render_manager_create_dummy_meshes	Variable. Print the current loading mode for the dummy meshes. Command. Preload dummy meshes (without any vertex data, only surfaces) on the world start-up. Meshes with full geometry data are loaded on demand, when they get into the view frustum. This option increases the world loading time, but safeguards against any lags on resource loading in run-time. Notice This command doesn't force loading of meshes of ObjectMeshStatic, ObjectMeshClutter and ObjectMeshCluster.	0 - dummy meshes are loaded only when they get into a view frustum 1 - dummy meshes are preloaded on the start-up (by default)
render_manager_create_meshes	Variable. Print the current loading mode for all meshes. Command. Load all meshes on the start-up. This option insures against any lags on mesh loading at run-time, but increases world loading time. Notice This command doesn't force loading of meshes of ObjectMeshStatic, ObjectMeshClutter and ObjectMeshCluster.	0 - meshes are loaded only when they get into a view frustum (by default) 1 - meshes are preloaded on the start-up
render_manager_meshes_memory	Variable. Print the current cache memory limits for meshes, in percents of the total GPU memory. Command. Set the cache memory limits for meshes, in percents of the total GPU memory.	0 - 100 ( 15 by default)

Decals

Operations on the mesh rendering.

Name	Description	Arguments
render_decals	Variable. Print the value indicating if decals should be rendered. Command. Render decals.	0 - disabled 1 - enabled (by default)

Fields

Operations on the field rendering.

Name	Description	Arguments
render_field_height_resolution	Variable. Print the current resolution of the texture into which all textures set for all FieldHeight objects are rendered. Command. Set resolution of the texture into which all textures set for all FieldHeight objects are rendered.	0 - 128×128 1 - 256×256 2 - 512×512 (by default) 3 - 1024×1024 4 - 2048×2048 5 - 4096×4096 6 - 8192×8192
render_field_shoreline_resolution	Variable. Print the current resolution of the texture into which all textures set for all FieldShoreline objects are rendered. Command. Set resolution of the texture into which all textures set for all FieldShoreline objects are rendered.	0 - 128×128 1 - 256×256 2 - 512×512 (by default) 3 - 1024×1024 4 - 2048×2048 5 - 4096×4096 6 - 8192×8192

Textures

Operations on the texture rendering.

Name	Description	Arguments
render_textures_quality	Variable. Print the current texture resolution. Command. Set the texture resolution.	0 - low resolution 1 - medium resolution 2 - high resolution (by default)
render_textures_max_resolution	Variable. Print the current texture resolution. Command. Set max resolution of all textures. The engine doesn't compress existing textures: it uses specified mip maps of *.dds textures.	0 - is 128x128 1 - is 256x256 2 - is 512x512 3 - is 1024x1024 4 - is 2048x2048 5 - is 4096x4096 6 - is 8192x8192 7 - is 16384x16384 -5 - is 1x1
render_filter	Variable. Print the current texture filtering mode. Command. Set the texture filtering mode.	0 - bilinear filtering 1 - trilinear filtering (by default)
render_anisotropy	Variable. Print the current texture anisotropy level. Command. Set the texture anisotropy level.	0 - level 1 1 - level 2 (by default) 2 - level 4 3 - level 8 4 - level 16

Texture Loading

Operations on the texture loading.

Name	Description	Arguments
render_manager_textures_memory	Variable. Print the current cache memory limits for textures, in percents of the total GPU memory. Command. Set the cache memory limits for textures, in percents of the total GPU memory.	0 - 100 ( 65 by default)

Shaders

Operations on shaders.

Name	Description	Arguments
render_defines	Command. Print the macros list related to the renderer (defines to make corresponding resources available in shaders).
render_shaders_quality	Variable. Print the current shader quality. Command. Set the shader quality.	0 - low 1 - medium (by default) 2 - high

Shader Loading

Operations on the shader loading.

Name	Description	Arguments
render_manager_create_shaders	Variable. Print the value indicating if shaders are compiled on the start-up. Command. Compile all shaders that are used in the loaded world on start-up.	0 - non-compiled (by default) 1 - compiled

Effects and Postprocesses

Operations on the effects and postprocesses.

Name	Description	Arguments
render_auxiliary	Variable. Print the value indicating if the auxiliary render buffer is enabled. Command. Enable auxiliary render buffer (should be enabled for render and post post-processes to work)	0 - disabled 1 - enabled (by default)
render_dof	Variable. Print the value indicating if the Gaussian blur depth of field effect is enabled. Command. Enable the Gaussian blur depth of field effect.	0 - disabled (by default) 1 - enabled
render_dof_resolution	Variable. Print the value indicating the resolution of DOF. Command. Set the DOF rendering resolution.	0 - quad resolution 1 - half resolution 2 - full resolution (by default)
render_dof_quality	Variable. Print the value indicating the quality of DOF. Command. Set the DOF rendering quality.	0 - Low 1 - Medium (by default) 2 - High 2 - Ultra
render_dof_bokeh_mode	Variable. Print the value indicating the mode of bokeh DOF effect. Command. Set the DOF bokeh effect mode.	0 - Ring (by default) 1 - Circle
render_dof_increased_accuracy	Variable. Print the value indicating if the DOF increased accuracy is enabled. Command. Enable or disable the DOF increased accuracy.	0 - disable (by default) 1 - enable
render_dof_focus_improvement	Variable. Print the value indicating if the DOF render_dof_focus_improvement is enabled. Command. Enable or disable the DOF render_dof_focus_improvement.	0 - disable (by default) 1 - enable
render_antialiasing	Variable. Print the current anti-aliasing type. Command. Set the anti-aliasing type.	0 - do not use anti-aliasing 1 - use FXAA 1 - use TAA
render_alternative_taa	Variable. Print the value indicating if the alternative TAA is enabled. The alternative TAA provides better antialiasing but produces more blurred image. Command. Enable or disable the alternative TAA. The alternative TAA provides better antialiasing but produces more blurred image.	0 - disable (by default) 1 - enable
render_taa_fix_blurring	Variable. Print the value indicating if the blurring fix is enabled. Command. Enable or disable the blurring fix (when TAA is enabled). This command fixes overblurred image when the camera (or object) is moving. Notice Enabling blurring fix may decrease AA quality, add movements flickering and increase performance costs.	0 - disable fix blurring 1 - enable (by default)
render_taa_fix_flicker	Variable. Print the value indicating if the bright pixels flicker fix is enabled. Command. Enable or disable the bright pixels flicker fix (when TAA is enabled). Notice Enabling fix flicker may increase performance costs.	0 - disable fix flicker 1 - enable (by default)
render_filmic	Variable. Print the value indicating if the filmic high-dynamic range color correction rendering is enabled. Command. Enable the filmic high-dynamic range color correction rendering.	0 - disabled (by default) 1 - enabled
render_bloom	Variable. Print the value indicating if the bloom effect is enabled. Command. Enable the bloom effect.	0 - disabled (by default) 1 - enabled
render_bloom_quality	Variable. Print the value indicating the quality of the bloom effect. Command. Set the quality of the bloom effect.	0 - half resolution 1 - full resolution (by default)
render_bokeh	Variable. Print the value indicating if the bokeh effect is enabled. Command. Enable the bokeh effect.	0 - disabled (by default) 1 - enabled
render_cross	Variable. Print the value indicating if the cross flares effect is enabled. Command. Enable the cross flares effect.	0 - disabled 1 - enabled (by default)
render_exposure_mode	Variable. Print the value indicating what mode of the adaptive exposure effect is enabled. Command. Change the mode of the adaptive exposure effect.	0 - disabled 1 - logarithmic adaptive exposure 2 - quadratic adaptive exposure
render_lens	Variable. Print the value indicating if the lens flares effect is enabled. Command. Enable the lens flares effect.	0 - disabled (by default) 1 - enabled
render_motion_blur	Variable. Print the value indicating if the motion blur effect is enabled. Command. Enable the motion blur effect.	0 - disabled 1 - enabled (by default)
render_motion_blur_quality	Variable. Print the value indicating if the high-quality motion blur effect is enabled. Command. Enable the high-quality motion blur effect.	0 - disabled (low-quality motion blur effect is used) 1 - enabled (by default)
render_reflection_dynamic	Variable. Print the value indicating if dynamic reflection is enabled. Command. Enable dynamic reflection.	0 - disable 1 - enabled (by default)
render_reflection_lods	Variable. Print the value indicating if dynamic reflections is enabled. Command. Enable reduction of resolution of dynamic reflections when the camera moves away.	0 - disable 1 - enabled (by default)
render_refraction	Variable. Print the value indicating if refraction is enabled. Command. Enable refraction.	0 - disabled 1 - enabled (by default)
render_sharpen	Variable. Print the value indicating if the sharpening effect is enabled. Command. Enable or disable the sharpening effect.	0 - disabled (by default) 1 - enabled
render_stereo	Variable. Print the value indicating the current stereo rendering mode. Command. Set the stereo rendering mode (it is not possible to set a stereo mode via a console if a default system script is used; it allows for setting it only on the start-up).	0 - disabled (by default) 1 - enabled anaglyph stereo 2 - enabled interlaced stereo 3 - enabled horizontal stereo 4 - enabled vertical stereo
render_ssr	Variable. Print the value indicating if screen space reflections are enabled. Command. Enable or disable screen space reflections.	0 - disabled 1 - enabled (by default)
render_ssr_resolution	Variable. Print the value indicating the quality of screen space reflections. Command. Set the quality of screen space reflections.	0 - render reflections in quad resolution 1 - render reflections in half resolution (by default) 1 - render reflections in full resolution
render_ssr_scale	Variable. Print the current scale of screen space reflections. Command. Set the scale of screen space reflections.	Scale can be in range [0;10] 1 by default
render_ssr_stretching	Variable. Print the current stretching factor of screen space reflections. Command. Set the stretching factor of screen space reflections.	Stretching factor can be in range [0;10] 0.5 by default
render_ssr_roughness_quality	Variable. Print the current quality of screen space reflections roughness. Command. Set the quality of screen space reflections roughness.	0 - low quality 1 - medium quality (by default) 2 - high quality 3 - ultra quality
render_ssr_normal_threshold	Variable. Print the value indicating if the normal threshold is enabled for screen space reflections. The normal threshold limits blur of screen space reflections (calculation of SSR roughness) by normals. Command. Enable or disable the normal threshold for screen space reflections. The normal threshold limits blur of screen space reflections (calculation of SSR roughness) by normals.	0 - disable 1 - enable (by default)
render_ssr_depth_threshold	Variable. Print the value indicating if the depth threshold is enabled for screen space reflections. The depth threshold limits blur of screen space reflections (calculation of SSR roughness) by depth. Command. Enable or disable the depth threshold for screen space reflections. The depth threshold limits blur of screen space reflections (calculation of SSR roughness) by depth.	0 - disable 1 - enable (by default)
render_ssr_near	Variable. Print the value indicating if screen space reflections calculation is enabled for the near view. Command. Enable or disable screen space reflections calculation for the near view.	0 - disable 1 - enable (by default)
render_ssr_near_quality	Variable. Print the current quality of screen space reflections rendered at the near view. Command. Set the quality of screen space reflections rendered at the near view.	0 - low quality 1 - medium quality (by default) 2 - high quality 3 - ultra quality
render_ssr_near_distance_scale	Variable. Print the scale of the rendering distance of the near view. Command. Set the scale for the rendering distance the near view.	Scale in range [0;10] 1 by default
render_ssr_far	Variable. Print the value indicating if screen space reflections calculation is enabled for the far view. Command. Enable or disable screen space reflections calculation for the far view.	0 - disable 1 - enable (by default)
render_ssr_far_quality	Variable. Print the current quality of screen space reflections rendered at the far view. Command. Set the quality of screen space reflections rendered at the far view.	0 - low quality 1 - medium quality (by default) 2 - high quality 3 - ultra quality
render_ssr_far_distance_scale	Variable. Print the scale of the rendering distance of the far view. Command. Set the scale for the rendering distance of the far view.	Scale in range [0;10] 1 by default
render_sss	Variable. Print the value indicating if the subsurface scattering is enabled. Command. Enable or disable the subsurface scattering.	0 - disabled 1 - enabled
render_sss_resolution	Variable. Print the value indicating which resolution mode is used for subsurface scattering. Command. Set the resolution mode to be used for subsurface scattering..	0 - half resolution 1 - full resolution
render_sss_quality	Variable. Print a value indicating which subsurface scattering quality mode is used. Command. Set the quality mode for the subsurface scattering.	0 - low 1 - medium 2 - high 3 - ultra

Lighting and Shading

Operations on the lighting and shading.

Name	Description	Arguments
render_environment	Variable. Print the value indicating if the environment is enabled. Command. Use the environment.	0 - disabled 1 - enabled (by default)
render_haze	Variable. Print the current mode of haze rendering. Command. Set the mode of haze rendering.	0 - disable the haze 1 - enable the haze colored the specific color 2 - enable the haze colored the sky LUT (by default)
render_specular_light	Variable. Print the value indicating if the specular light is rendered. Command. Enable or disable rendering of the specular light.	0 - disable 1 - enable (by default)
render_lights_max_per_batch	Variable. Print the current number of lights per batch call. Command. Sets maximum number of lights per batch call.	0 - disable optimization (by default)
render_lights_tile_grid_size	Variable. Print the grid size in tiles per axis (8 by default). Command. Set the grid size in tiles per axis.
render_shadows	Variable. Print a value indicating whether shadows are rendered or not. Command. Enable or disable shadows rendering.	0 - skip shadows rendering 1 (default) - enable shadows rendering
render_ssao	Variable. Print the value indicating whether screen-space ambient occlusion is enabled. Command. Use screen-space ambient occlusion.	0 - disable SSAO 1 - use SSAO
render_ssao_quality	Variable. Print the value indicating the quality of screen-space ambient occlusion. Command. Set screen-space ambient occlusion quality.	0 - use 4 samples 1 - use 8 samples 2 - use 16 samples 3 - use 32 samples
render_ssao_resolution	Variable. Print the value indicating the resolution of screen-space ambient occlusion. Command. Set screen-space ambient resolution quality.	0 - half 1 - full
render_ssao_noise	Variable. Print the value indicating if screen-space ambient occlusion noise is enabled. Command. Enable the screen-space ambient occlusion noise.	0 - disable 1 - enable
render_parallax	Variable. Print the value indicating if the parallax occlusion mapping is enabled. Command. Enable parallax occlusion mapping.	0 - disabled 1 - enabled (by default)
render_surface_lightmap	Variable. Print the value indicating if the surface lightmap is enabled. Command. Enable surface lightmap usage.	0 - skip surface light map 1 - use surface light map (by default)
render_surface_ao	Variable. Print the value indicating if the surface ambient occlusion is enabled. Command. Enable surface ambient occlusion.	0 - skip surface ambient occlusion 1 - use surface occlusion (by default)

Lights

Operations on lights.

Name	Description	Arguments
render_show_lights	Variable. Print the value indicating if the light areas are displayed without attenuation. Command. Display light areas without attenuation.	0 - lights are faded (by default) 1 - lights are displayed without attenuation
render_show_scissors	Variable. Print the value indicating if scissor rectangles are shown. Command. Enable scissor rectangles.	0 - hidden (by default) 1 - shown
render_world_lights_per_forward_object	Variable. Print the value indicating the maximum number of world lights per object (only for forward material). Command. Set the maximum number of world lights per object (only for forward material).	[0;128] - 4 is the default value (128 max)
render_omni_lights_per_forward_object	Variable. Print the value indicating the maximum number of omni lights per object (only for forward material). Command. Set the maximum number of omni lights per object (only for forward material).	[0;128] - 4 is the default value (128 max)
render_proj_lights_per_forward_object	Variable. Print the value indicating the maximum number of projected lights per object (only for forward material). Command. Set the maximum number of projected lights per object (only for forward material).	[0;128] - 4 is the default value (128 max)
render_env_probes_per_forward_object	Variable. Print the value indicating the maximum number of environment probes per object (only for forward material). Command. Set the maximum number of environment probes per object (only for forward material).	[0;128] - 4 is the default value (128 max)

Shadows

Operations on shadows.

Name	Description	Arguments
render_shadow_shafts	Variable. Print the value indicating if shadow shafts are enabled. Command. Enable shadows shafts.	0 - disabled 1 - enabled (by default)
render_sun_shafts	Variable. Print the value indicating if sun shadows shafts are enabled. Command. Enable sun shadows.	0 - disabled 1 - enabled (by default)
render_show_cascades	Variable. Print the value indicating if Parallel Split Shadow Map (PSSM) splits for world lights are enabled. Command. Enable Parallel Split Shadow Map (PSSM) splits for world lights.	0 - disabled (by default) 1 - enabled
render_show_penumbra	Variable. Print the value indicating if penumbra (half-shade regions) in color is enabled. Command. Enable penumbra (half-shade regions).	0 - disabled (by default) 1 - enabled
render_soft_shadows	Variable. Print the value indicating if the soft shadows are used. Command. Enable or disable the soft shadows.	0 - disabled 1 - enabled
render_omni_shadow_jitter	Variable. Print the value indicating if the jittering for shadows casted by the omni light sources is enabled. Command. Enable or disable jittering for shadows casted by the omni light sources.	0 - disabled 1 - enabled
render_lerp_cascades	Variable. Print the value indicating if the shadows cascades lerp is enabled. Command. Enable or disable the shadows cascades lerp.	0 - disabled 1 - enabled

Terrain Rendering

Notice

The commands described below affect only terrain (the ObjectTerrain class).

Name	Description	Arguments
render_terrain_anisotropy	Variable. Print a value indicating the current terrain texture anisotropy level. Command. Set the terrain texture anisotropy level.	0 - anisotropy level 1 1 - anisotropy level 2 2 - anisotropy level 4 (default) 3 - anisotropy level 8 4 - anisotropy level 16
render_terrain_refined_albedo	Variable. Print a value indicating what terrain albedo textures (coarse of refined) are used. Command. Set the type (coarse of refined) of albedo terrain textures.	0 - use coarse albedo 1 - use refined albedo
render_terrain_refined_normal	Variable. Print a value indicating what terrain normal textures (coarse of refined) are used. Command. Set the type (coarse of refined) of normal terrain textures.	0 - use coarse normal 1 - use refined normal
render_terrain_refined_mask	Variable. Print a value indicating what terrain mask textures (coarse of refined) are used. Command. Set the type (coarse of refined) of mask terrain textures.	0 - use coarse mask 1 - use refined mask

Water Rendering

Notice

The commands described below affect only global water (the ObjectWater class).

Name	Description	Arguments
render_water_ssr	Variable. Print a value indicating if the water screen-space reflections are enabled. Command. Enable the water the water screen-space reflections.	0 - disabled 1 - enabled (by default)
render_water_ssr_quality	Variable. Print a value indicating which water screen-space reflections quality mode is used. Command. Set the quality mode for the water screen-space reflections.	0 - low 1 - medium 2 - high 3 - ultra
render_water_ssr_increased_accuracy	Variable. Print a value indicating if the increased accuracy for the water screen-space reflections is enabled. Command. Enable the increased accuracy for the water screen-space reflections.	0 - disabled 1 - enabled
render_water_fragment_discard	Variable. Print the value indicating if full fragment discard is enabled for field spacers used with water. Command. Enable or disable full fragment discard for field spacers used with water.	0 - disable (by default) 1 - enable
render_water_enviroment_probes	Variable. Print the value indicating if environment probes are enabled for water rendering. Command. Enable or disable environment probes for water rendering.	0 - disable 1 - enable (by default)
render_water_lights	Variable. Print the value indicating if lights are enabled for water rendering. Command. Enable or disable lights for water rendering.	0 - disable 1 - enable (by default)
render_water_shafts	Variable. Print the value indicating if underwater shafts are enabled. Command. Enable or disable underwater shafts.	0 - disable 1 - enable (by default)
render_water_anisotropy	Variable. Print a value indicating the current terrain texture anisotropy level. Command. Set the terrain texture anisotropy level. Variable. Print the value indicating the current water texture anisotropy level. Command. Set the water texture anisotropy level.	0 - anisotropy level 1 1 - anisotropy level 2 (default) 2 - anisotropy level 4 3 - anisotropy level 8 4 - anisotropy level 16
render_water_opacity_depth	Variable. Print the value indicating if writing depth for water in opacity buffer is enabled. Command. Enable or disable writing depth for water in opacity buffer.	0 - disable 1 - enable (by default)
render_water_shoreline_wetness	Variable. Print the value indicating if shoreline wetness is enabled. Command. Enable or disable shoreline wetness.	0 - disable 1 - enable (by default)

Output Modes

Name	Description	Arguments
render_panorama	Variable. Print the value indicating which mode of panoramic rendering is enabled. Command. Enables panoramic rendering of the specified mode.	0 - disable panoramic rendering (by default) 1 - set a 180-degree panorama with curved edges 2 - set a 180-degree linear panorama without distortion at the edges 3 - set a 180-degree spherical panorama (fisheye) 4 - set a 360-degree panorama with curved edges 5 - set a 360-degree panorama with curved edges 6 - set a 360-degree spherical panorama (fisheye)

Other Settings

Name	Description	Arguments
render_queries	Variable. Print the value indicating if a query test is run. Command. Run an additional hardware occlusion query test before sending date to the GPU. Notice Make sure that the Culled by occlusion query flag is set for nodes.	0 - not run 1 - run (by default)

Name	Description	Arguments
video_debug	Variable. Print the value indicating if the debug context is enabled or not. Command. Enable the debug context of OpenGL or DirectX 11. To come to effect, the command requires video_restart to be run after it. Notice Enabling the debug context may cause performance drop (~30-40%).	0 - not enabled (by default) 1 - enabled

DirectX 11

Operations on the Direct3D11 API.

Name	Description	Arguments
d3d11_render_desc	Command. Print the information about the hardware configuration.
d3d11_render_use_compute_shader_11	Variable. Print the value indicating if the Direct3D 11 level compute shader is applied. Command. Apply the Direct3D 11 level compute shader.	0 - not applied 1 - applied (by default)
d3d11_render_use_tessellation	Variable. Print the value indicating if tessellation is enabled. Command. Enable tessellation.	0 - disabled 1 - enabled (by default)

OpenGL

Operations on the OpenGL API.

Name	Description	Arguments
gl_render_renderer	Command. Print the information on the graphics card.
gl_render_vendor	Command. Print the manufacturer of the OpenGL driver.
gl_render_version	Command. Print the version of the OpenGL driver.
gl_render_shading_language	Command. Print the version of the OpenGL shading language.
gl_render_extensions	Command. Print OpenGL render extensions.
gl_render_use_arb_compute_shader	Variable. Print the value indicating if the GL_ARB_compute_shader extension is set. Command. Set the GL_ARB_compute_shader extension.	0 - not set (by default) 1 - set
gl_render_use_arb_sample_shading	Variable. Print the value indicating if the GL_ARB_sample_shading extension is set. Command. Set the GL_ARB_sample_shading extension.	0 - not set 1 - set (by default)
gl_render_use_arb_tessellation_shader	Variable. Print the value indicating if the GL_ARB_tessellation_shader extension is set. Command. Set the GL_ARB_tessellation_shader extension.	0 - not set 1 - set (by default)
gl_render_skip_errors	Variable. Print the value indicating if OpenGL errors are skipped. Command. Skip OpenGL errors.	0 - checked (by default) 1 - skipped

OpenAL Settings

Operations on the OpenAL API.

Name	Description	Arguments
al_sound_renderer	Command. Print the information on the sound card.
al_sound_vendor	Command. Print the manufacturer of the OpenAL driver.
al_sound_version	Command. Print the version of the OpenAL driver.
al_sound_extensions	Command. Print the available OpenAL sound extensions.
alc_sound_extensions	Command. Print OpenAL context sound extensions.
al_sound_skip_errors	Variable. Print the value indicating if OpenAL errors are skipped. Command. Skip OpenAL errors.	0 - checked (by default) 1 - skipped

Operations on the screenshot.

Name	Description	Arguments
video_extension	Variable. Print the current screenshot format. Command. Set a screenshot format.	0 - TGA (by default) 1 - DDS 2 - PNG 3 - JPG
video_grab	Command. Take a screenshot. Notice A screenshot is saved in the bin/screenshots directory by default. You can specify another directory.	A path to the folder the screenshots will be saved in (optional)

Memory Info

Operations, representing information on the system memory.

Name	Description
memory_dump	Command. Print information on the memory dump in form of the fragmentation map.
memory_info	Command. Print information on the memory usage: Heap usage - size of the heap memory Memory usage - size of the used system memory Allocations - number of allocations
memory_save	Command. Dump memory pools (useful for offline analysis).

CPU Info

Operations, representing information on the CPU.

Name	Description
cpu_info	Command. Print an information on the CPU and instruction sets supported by it.
cpu_frequency	Command. Print the CPU frequency in MHz.
cpu_count	Command. Print the number of available CPUs.

System Info

Operations, representing information on the system.

Name	Description
binary_info	Command. Print an information on the engine binary.
system_info	Command. Print an information on the operating system and the engine build version.
system_memory	Command. Print the system memory size in Mbytes.

GPU Info

Operations, representing information on the GPU.

Name	Description
gpu_info	Command. Print the video card and driver versions.
gpu_memory	Command. Print the video memory size in Mbytes.
gpu_count	Command. Print the number of available GPUs.

In This Article:

How to Open Console

Console Operation

Command Syntax

Hints

How to Change the Console Opening Key

Console

Console GUI

Engine

Engine Configuration File

Engine Analyzer

World

World State

World Resources

World Queueing

Sound

Sound Resources

Camera

File System

File System Info

File Queueing

Editor

Editor Controls

Asset Browser

Scripts

World Script Analyzer

Script Debugger

Multi-Threading

Asynchronous Operations

Visualizer

World Debugging

Node Debugging

Occluder Debugging

Physics Debugging

Texture Debugging

Occlusion Queries

Performance Profiler

Profiler GUI

Video Settings

Resolution and Full Screen

Graphics Settings

Multi-Monitor and Stereo Rendering

Rendering Settings

Rendering Resources

Rendering Buffers

Rendering Buffer Info

Rendering Buffer Debugging

Rendering Passes

Meshes

Mesh Loading

Decals

Fields

Textures

Texture Loading

Shaders

Shader Loading

Effects and Postprocesses

Lighting and Shading

Lights

Shadows

Terrain Rendering

Water Rendering

Output Modes

Other Settings

Renderers

DirectX 11

OpenGL

OpenAL Settings

Screenshots

General Information

Memory Info

CPU Info

System Info

GPU Info