grass_base

Auxiliary pass is used for writing an additional texture into an auxiliary color buffer. Detail information on the pass can be found in the Rendering Sequence article.

Shape specifies the way to render the grass geometry:

• Default - grass quads are rendered as a plain geometry and are turned randomly.
• Billboard - grass quads are rendered as billboards and always face the camera.

Default shape	Billboard shape

Animation option enables animation for objects (e.g. for plants swinging in the wind). Available modes:

• Disabled - animation is disabled.
• Default - standard animation is enabled.

  

  Standard animation
• Field Animation - standard animation is enabled. Besides, objects are also influenced by FieldAnimation.

  FieldAnimation with visualizer disabled	FieldAnimation with visualizer enabled

FieldSpacer interaction option enables interaction with FieldSpacer objects.

Interaction with FieldSpacer disabled	Interaction with FieldSpacer enabled

Color noise activates a spatial color noise texture, so the grass field is colored differently according to it. The noise can add irregularity to the color of the grass field or it can color the grass.

Color noise disabled	Color noise enabled

Light map activates an additional light map texture therefore specifying that the material will be rendered lit by it. Color is multiplied by the light map and the ambient color.

Ambient Occlusion enables the ambient occlusion that sets shading arising from the ground to the top of the grass blade.

Ambient Occlusion disabled	Ambient Occlusion enabled

Translucent activates an additional translucent texture.

Emission activates an additional emission texture. It is used to simulate glow from extremely bright surfaces, therefore imitating real light sources and highlights.

Bend activates an additional bend texture and bend scale parameter. It is used to bend grass according to the mask.

Bend option disabled	Bend option enabled

Jitter transparency enables creating deferred transparency by using jittering. The state can be used when such result is acceptable and post-effects are applied to the material.

Mip bias activates an additional mip bias parameter. It is used to adjust mip mapping.

Diffuse texture defines the grass shape and color. It is subdivided into chunks that are placed in the texture as follows:

• The horizontal row can have up to 4 chunks. This number depends on the number of channels of the mask texture used.
• The vertical column can have any number of chunks from 1 to 4. Chunks in the column represent variations of grass of the particular species (thinner, thicker, tangled, etc.). The chunks of the column are randomly spread across the area.

The texture is 4-channeled (RGBA):

• The RGB values store grass color information.
• The alpha (A) stores transparency information and defines which parts of the grass chunks will be rendered colored and which ones will be cut by means of the alpha test.

Noise texture is used to color the grass (for example, to match the colors of the terrain) or to add irregularity to the color of the grass field. In both cases, the colors of the grass diffuse texture and the spatial noise texture are blended in the overlay mode.

The texture is 3-channeled (RGB).

Noise texture used to add color irregularity	Noise texture used to color the grass

For example, if you apply these textures to the following grass field and set the Noise Scale to 0.6, you will get the following result:

The texture that is used to color the grass is usually generated based on the terrain's albedo texture colors. The texture and the terrain size may differ, but the spatial noise texture should meet the following requirements:

• Dimensions of the texture should be equal to some power of two (for example, 1024 ×  1024 , 2048 ×  2048 and so on).
• Dimensions of the texture should be proportional to the terrain size. For example, if you have the 4096 ×  4096 terrain, the texture should not be256 ×  512 .
• Dimensions of the texture should be chosen so that to get the result of appropriate quality after mapping pixels to the terrain. For example, if you have the 4096 ×  4096 terrain and the1024 ×  1024 texture, 1 pixel of this texture will be mapped to cover 4 units of the terrain. If such quality is enough, you can use this texture. Otherwise, you should create a new one of an appropriate size.

Lightmap texture stores pre-computed light information.

Translucent texture stores information on material's translucency..

Auxiliary texture is used for auxiliary rendering pass.

Emission texture stores information about the light emission. It is blended additively over a texture, so areas which do not glow at all should be pure black on the glow mask, and any brighter colors will appear to be emitting light.

The texture is 4-channeled (RGBA):

• The RGB values store information on a glowing color.
• The alpha (A) value stores a glow mask:
  • White color indicates that the area is glowing.
  • Black color indicates that the area is not glowing.

Bend texture stores the grass bending mask.

The texture is 1-channeled (R):

• R - bend intensity values.

Diffuse texture color is the base color of the grass surface.

Specular is a color picker to choose the auxiliary specular color. It can be used for specifying different specular colors for one texture or modifying the texture color on the spot.

Gloss is a coefficient modifying the size of the highlight. Low values imitate wider highlights, typically appropriate to create diffuse reflection from mat surfaces. High values imitate pinpoint highlights, typically appropriate to create uniform reflection of light rays from glossy surfaces.

Microfiber is a coefficient to scale the intensity of the microfiber effect. This parameter creates an effect of the napped surface. The higher the value, the higher the microfiber effect is.

A coefficient to scale the translucent effect, which permits light to pass through the grass blades, but diffuses it so objects behind the grass blades are not visible. The higher the value, the more translucent the material is.

A coefficient to scale the value of the alpha channel of the grass diffuse texture. The higher the value, the bigger areas of the texture are rendered.

A coefficient to scale the inclination of grass polygons.

• By the minimum value of 0, inclination of the grass polygons coincides direction of the normal of the polygon on which the grass grows.
• When increasing the parameter value, the inclination of the grass polygons relative to the camera increases.

Changing value from 0 to 0.6 and conversely

Coefficient for mip maps adjusting.

Stem noise is a coefficient to scale a spatial noise that diversifies the direction of movement of the grass.

• 0 makes the grass move uniformly.
• Increasing the value makes the grass blades movement more random.

Stem offset is a coefficient to scale an amplitude of horizontal movement of the grass.

Stem radius is a coefficient to scale an amplitude of vertical movement of the grass.

Stem scale is a coefficient to scale the speed of grass movement.

Spatial noise texture coordinates transformation along X, Y and Z axes. A vector of the three float components:

• By high values, color blobs are small in size (for example, several blobs per leaf). Tiles of the spatial noise texture are small and repeat often
• By low values, color blobs are big (for example, several blobs for the whole tree). Tiles of the spatial noise texture are big and repeat a few times

Scale is a coefficient to scale intensity of the spatial noise texture.

Color is a color multiplier for the emission texture.

Intensity is a coefficient to scale intensity of the emission texture. The higher the value, the lighter and brighter light areas of the emission texture are.

Intensity is a coefficient to scale the intensity of the light map illumination. The higher the value, the brighter the illumination is.

Gamma parameter specifies the gamma of the light map texture.

Visibility parameter specifies how the AO has influence on grass.

Multiplier is a coefficient to scale the occlusion that sets shading starting from the ground to the top of the grass blades. The higher the value, the less shaded the grass is.

Power parameter sets the rate of ambient occlusion appearance on the grass.

On Diffuse shows how ambient occlusion affects the grass diffuse texture.

Color is a constant color for the auxiliary rendering pass.

Intensity is a coefficient to scale bending of the grass. The higher the value, the more significant the bending is.

Bend Scale = 0.6	Bend Scale = 0.8