Unigine::WorldClutter Class

WorldClutter Class

Members

---

static WorldClutterPtr create()

Constructor. Creates a world clutter with default properties.

Ptr<WorldClutter> cast(const Ptr<Node> & node)

Arguments

• const Ptr<Node> & node

void setAngle(float angle)

Sets the angle cosine that defines the slope steepness appropriate for positioning nodes.

Arguments

• float angle - Slope angle cosine. The provided value will be saturated in range [0;1].

float getAngle()

Returns the current angle cosine that defines the slope steepness appropriate for positioning nodes.

Return value

Slope angle cosine.

void setDensity(float density)

Sets the density factor that defines the amount of reference nodes per square unit.

Arguments

• float density - Density factor. If a negative value is provided, 0 will be used instead.

float getDensity()

Returns the current density factor that defines the number of reference nodes per square unit.

Return value

Density factor.

void setFadeDistance(float distance)

Sets the distance up to which reference nodes will be fading out (that is, fewer nodes will be rendered instead of all). The distance is measured starting from the visible distance.

Arguments

• float distance - Distance in units. If a negative value is provided, 0 will be used instead.

float getFadeDistance()

Returns the current distance up to which reference nodes are fading out (that is, fewer nodes will be rendered instead of all). The distance is measured starting from the visible distance.

Return value

Distance in units.

void setIntersection(int intersection)

Sets a value indicating whether reference nodes should be scattered upon the ground (along its relief): either the terrain or a mesh set as a parent node.

Arguments

• int intersection - Positive number to enable intersection; 0 to disable.

int getIntersection()

Returns a value indicating whether reference nodes are scattered upon the ground (along its relief): either the terrain or a mesh set as a parent node.

Return value

1 if intersection is enabled; otherwise, 0.

void setMaskFlipX(int maskflipx)

Flip the mask by X axis.

Arguments

• int maskflipx - Positive value to flip the mask; otherwise, 0.

int getMaskFlipX()

Returns a flag indicating if a mask is flipped by X axis.

Return value

Positive value if the mask is flipped; otherwise, 0.

void setMaskFlipY(int maskflipy)

Flip the mask by Y axis.

Arguments

• int maskflipy - Positive value to flip the mask; otherwise, 0.

int getMaskFlipY()

Returns a flag indicating if a mask is flipped by Y axis.

Return value

Positive value if the mask is flipped; otherwise, 0.

int setMaskImage(const Ptr<Image> & image)

Sets an image (in R8 format) that defines the placement of meshes.

Arguments

• const Ptr<Image> & image - Pointer to the image.

Return value

1 if the mask image is successfully set; otherwise, 0.

int getMaskImage(Ptr<Image> & image)

Writes the image that is currently used as a mask for the placement of meshes into the given buffer.

Arguments

• Ptr<Image> & image - Image buffer to store a mask into.

Return value

1 if the mask image is successfully written into the buffer; otherwise, 0.

void setMaskImageName(const char * name)

Sets the name of a new mask texture (in R8 format) that defines the placement of meshes.

Arguments

• const char * name - Name (path) of the mask texture.

const char * getMaskImageName()

Returns the name of a mask texture (in R8 format) that defines the placement of reference nodes.

Return value

Name (path) of the mask texture.

void setMaskInverse(int inverse)

Specifies if reference nodes should be rendered inside or outside the mask mesh contour.

Arguments

• int inverse - 0 to render reference nodes inside the mesh contour; 1 to render them outside.

int getMaskInverse()

Returns a flag indicating if reference nodes are rendered inside or outside the mask mesh contour.

Return value

0 if reference nodes are rendered inside the mesh contour; 1 if outside.

void setMaskMaxValue(int value)

Sets the maximum mask value for the WorldClutter object.

Arguments

• int value - Maximum mask value.

int getMaskMaxValue()

Returns the maximum mask value for the WorldClutter object.

Return value

Maximum mask value.

void setMaskMeshName(const char * name)

Sets a mesh to be used as a mask for the world clutter. This mesh should be plane.

Arguments

• const char * name - Path to the *.mesh file.

const char * getMaskMeshName()

Returns the current mesh to used as a mask for the world clutter. This mesh should be plane.

Return value

Path to the *.mesh file.

void setMaskMinValue(int value)

Sets the minimum mask value for the WorldClutter object.

Arguments

• int value - Minimum mask value.

int getMaskMinValue()

Returns the minimum mask value for the WorldClutter object.

Return value

Minimum mask value.

void setMaxScale(float mean, float spread)

Sets the scale for meshes in the areas with high density (according to the mask). With the minimum scale it is possible to automatically render, for example, big trees in the center of the forest. A spread value enables to control the range of scales relative to the mean value.

Arguments

• float mean - Scale mean value.
• float spread - Maximum spread value to randomly upscale or downscale objects.

float getMaxScaleMean()

Returns the scale mean value for meshes in the areas with high density (according to the mask).

Return value

Scale mean value.

float getMaxScaleSpread()

Returns the scale spread value that controls the range of mesh scales in the areas with high density (according to the mask).

Return value

Scale spread value.

void setMinScale(float mean, float spread)

Sets the scale for meshes in the areas with low density (according to the mask). With the minimum scale it is possible to automatically render, for example, small trees at the forest border. A spread value allows to control the range of scales relative to the mean value.

Arguments

• float mean - Scale mean value.
• float spread - Maximum spread value to randomly upscale or downscale objects.

float getMinScaleMean()

Returns the scale mean value for meshes in the areas with low density (according to the mask).

Return value

Scale mean value.

float getMinScaleSpread()

Returns the scale spread value that controls the range of mesh scales in the areas with low density (according to the mask).

Return value

Scale spread value.

void setNodesRotation(const Math::vec3 & mean, const Math::vec3 & spread)

Sets the rotation of reference nodes along X, Y and Z axes.

Arguments

• const Math::vec3 & mean - Mean values of rotation angles in degrees.
• const Math::vec3 & spread - Spread values of rotation angles in degrees.

Math::vec3 getNodesRotationMean()

Returns the mean value of reference nodes rotation along X, Y and Z axes.

Return value

Mean values of rotation angles in degrees.

Math::vec3 getNodesRotationSpread()

Returns the spread value of reference nodes rotation along X, Y and Z axes.

Return value

Spread values of rotation angles in degrees.

int getNumReferences()

Returns the total number of reference nodes contained in the world clutter.

Return value

The number of reference nodes.

void setOffset(float mean, float spread)

Sets the vertical offset that determines the placement of reference nodes above or below the surface.

Arguments

• float mean - Mean value of the offset in units.
• float spread - Spread value of the offset in units.

float getOffsetMean()

Returns the current mean value of the vertical offset that determines the placement of reference nodes above or below the surface.

Return value

Mean value of the offset in units.

float getOffsetSpread()

Returns the current spread value of the vertical offset that determines the placement of reference nodes above or below the surface.

Return value

Spread value of the offset in units.

void setOrientation(int orientation)

Sets a value indicating whether reference nodes should be oriented along the normals of the ground (either the terrain or a mesh set as a parent node).

Arguments

• int orientation - Positive number to enable orientation; 0 to disable.

int getOrientation()

Returns a value indicating whether reference nodes are oriented along the normals of the ground (either the terrain or a mesh set as a parent node).

Return value

1 if orientation is enabled; otherwise, 0.

void setReferenceName(int num, const char * name)

Sets the name of the specified reference node contained in the world clutter.

Arguments

• int num - The number of the reference node.
• const char * name - Name to be updated.

const char * getReferenceName(int num)

Returns the name of the reference node contained in the world clutter.

Arguments

• int num - The number of the reference node among contained in the world clutter.

Return value

Name of the reference node.

void setReferenceProbability(int num, float probability)

Sets the probability of the occurrence of the specified node reference.

Arguments

• int num - The number of the reference node.
• float probability - Probability factor. The provided value is saturated in range [0;1].

float getReferenceProbability(int num)

Returns the probability of the occurrence of the specified node reference.

Arguments

• int num - The number of the reference node.

Return value

Probability factor.

void setSeed(int seed)

Sets the seed for pseudo-random positioning of reference nodes.

Arguments

• int seed - Number used to initialize a pseudo-random sequence. If a negative value is provided, 0 will be used instead.

int getSeed()

Returns the seed used for pseudo-random positioning of reference nodes.

Return value

Number used to initialize a pseudo-random sequence.

void setSizeX(float sizex)

Sets the width of the world clutter along the X-coordinate.

Arguments

• float sizex - X-coordinate width in units. If a negative value is provided, 0 will be used instead.

float getSizeX()

Returns the current width of the world clutter along the X-coordinate.

Return value

X-coordinate width in units.

void setSizeY(float sizey)

Sets the length of the world clutter along the Y-coordinate.

Arguments

• float sizey - Y-coordinate length in units. If a negative value is provided, 0 will be used instead.

float getSizeY()

Returns the current length of the world clutter along the Y-coordinate.

Return value

Y-coordinate length in units.

void setSpawnRate(int rate)

Determines how many cells (in which the world clutter is rendered) are updated each frame. High number of updated cells may lead to a performance spike.

Arguments

• int rate - Number of cells to be updated. If a non-positive value is provided, 1 will be used instead.

int getSpawnRate()

Returns the number of cells updated each frame. High number of updated cells may lead to a performance spike.

Return value

Number of cells to be updated.

void setStep(float step)

Sets the step for cells used to render node references.

Arguments

• float step - Step for clutter cells in units.

float getStep()

Returns the step for cells used to render node references contained in the world clutter.

Return value

Step for clutter cells in units.

void setThreshold(float threshold)

Sets the density threshold (for a mask) starting from which reference nodes are rendered if placed dense enough.

Arguments

• float threshold - Density threshold. The provided value will be saturated in range [0;1].

float getThreshold()

Returns the current density threshold (for a mask) starting from which reference nodes are rendered if placed dense enough.

Return value

Density threshold.

void setVisibleDistance(float distance)

Sets the distance up to which all the reference nodes will be rendered. The distance is measured from the camera.

Arguments

• float distance - Distance in units. If a negative value is provided, 0 will be used instead.

float getVisibleDistance()

Returns the current distance up to which all the reference nodes will be rendered. The distance is measured from the camera.

Return value

Distance in units.

int addReference(const char * name)

Adds a new reference node to the world clutter.

Arguments

• const char * name - Name of the reference node.

Return value

The number of added reference node.

void removeReference(int num)

Removes the specified reference node from the world clutter.

Arguments

• int num - The number of the reference node.

int type()